10 ай бұрын
11 ай бұрын
2 жыл бұрын
Пікірлер
@juanhiggins7859 6 күн бұрын
Where did you find the manual ECM? I'm looking online and can't find anything. I have a 2001 Ford Ranger XLT 4.0l v6 SOHC and a donor vehicle, a 1998 Ford Ranger XLT 4.0l v6 OHV.
@stuffyoucando2 6 күн бұрын
My donor truck had what I needed, but I also sourced a spare from a local junk yard.
@santinoeli71506 9 күн бұрын
SOOOOOOOOOOOOOOOOOOOOOOO SUPRISED THAT THIS, THE PATHFINDER (SADLY), OUTLANDER, BRZ AND 86 NEVER HAD A TRUE 2021 MODEL YEAR WHY!!!!😢😢😢😢😢😢😢😢😢😢😢😢😢😢😡😡😡😡😡😡😡😡😡😡😡😡😡😡
@stuffyoucando2 9 күн бұрын
I can’t speak for every model you listed, but at least a couple of those did that to focus on the next generation that were full redesigns.
@erichg1000 11 күн бұрын
First comment oh heck ya bud!!
@Lando_Solo 11 күн бұрын
Holy shit I just acquired a 96 2.3 2wd 5speed and your series here are about to be my next 6 months haha. If I get hard stuck on something I might have to pick your brain. I'm hoping to find diff, pistons, and clutch upgrades before anything. Cheers!
@stuffyoucando2 11 күн бұрын
Good luck!
@socalrooterplumbingservice4429 17 күн бұрын
My f250 died now this light came on and won’t re learn
@macbot3000 18 күн бұрын
Thank you! This worked on the 2014 Transit Connect I just bought. Had to do twice, as I got a failure message the first time. Not sure what this updates. Log file upload got the 'file problem' message. Would be surprised if Ford is even supporting uploading for this version at all, given the age of Sync 1 now.
@curtis73463 18 күн бұрын
Heat the diesel.1st
@bigmotoxer 20 күн бұрын
I didn't see no o-ring when removing or installing c clips
@stuffyoucando2 20 күн бұрын
I’m sure with age they can deteriorate and go missing.
@richardwilliams1986 22 күн бұрын
Most ramps have the rubber inserts only in the rear of the ramp as a safety preventing driving past the front wheel stop, the ramp slides instead.
@Lando_Solo 22 күн бұрын
This has been an awesome watch. I got a 96 5 speed 2.3l 2wd this summer, and I just learned all the fun questions through your 6 part videos here. Hope the truck is still blastin.
@FraktalsFestiVids 23 күн бұрын
Thank you! Clear, concise, and you didn't tell us about your childhood and life choices like some instructional videos do. 😂
@yesteti 7 күн бұрын
Cackled at this
@tracygriffin6205 26 күн бұрын
Great video. Nice job.
@OrlandoSanchez-et6xq 26 күн бұрын
Just installed them and unfortunately I still feel a hard bump here and there. Maybe I’ll give it more time
@stuffyoucando2 25 күн бұрын
What do you mean hard bump?
@dallaswheeler2094 Ай бұрын
You have a Pn for the seals
@stuffyoucando2 Ай бұрын
The seals can be different depending on what vehicle you have.
@AndrewMcSpadden Ай бұрын
How big is this? Would it fit a dirt bike carb?
@stuffyoucando2 Ай бұрын
The tank is 10”L x 6”W x 3”D
@Pwnulolumad Ай бұрын
I wrapped my entire exhaust system from downpipe to rear mufflers for the increased internal heat and resulting exhaust velocity. I also did it to get slight acoustic benefits by adding total mass to the pipes therefore shifting the resonance point. From what I’ve read the wrap will block high frequencies not low frequencies. ( blocks rasp not bass )
@Scuba451 Ай бұрын
I put new sensor and valve I. Tire it won’t recognize new one when I do this it says it’s preprogrammed
@leeraines7821 Ай бұрын
This will work on brand new Fords after you take them out of transport mode and it asks you to train the tires, its a pain in the ass but if you get trucks that dont go through a dealer or Ford service department this is how to do it.
@abigailadams6002 Ай бұрын
Does not work for ford escape
@stuffyoucando2 Ай бұрын
What year?
@Daniel-mq3kb Ай бұрын
Thank you for the video. It has given me some other ideas that I had not thought of.
@wendypemberton2164 Ай бұрын
Thank you this helped me out a lot.
@james-browny Ай бұрын
Good review, but I am using mobokey. It also has apple watch!
@stevenperry2157 Ай бұрын
If it takes an entire tube per wheel, this design is INSANE. I have pulled trailers and worked on them my entire life and have never seen an axle that has to have ALL these grease replaced every year. Couple of pumps until you see grease come out and your done. 40 years of this process with no failures EVER until Dexter came along and i burn through a spindle because of no grease. Design failure for sure....
@fairlessdave1834 Ай бұрын
Nice job. I really expected a light sanding to smooth it out. Would have appreciated a finished closeup like you showed prior to fixing it.
@Hannibal54689 2 ай бұрын
The rear brakes don't have the 2 pins which separate the brake pads from the rotors like the front brakes have?
@stuffyoucando2 24 күн бұрын
Nope, what you see is the hardware that's used for the rears.
@Joseph-i5u 2 ай бұрын
Dexter says: 1. Never put your jack on the axle. It goes on the frame according to the RV manufacturer's instructions. 2. Always use a hand-operated grease gun...never electric or pneumatic. I've never used more than 1/4 to 1/3 tube on any hand-packed bearing. I'd be reluctant to use more than that...maybe it's blowing out the rear seal. My current Dexter has globs of grease in it when I remove the cap...not sure I'm going to pump that much grease into this axle.
@pmoormann 2 ай бұрын
Guess your shocks wont be doing their job with those in the way.
@stuffyoucando2 2 ай бұрын
Guess you’re assuming the suspension no longer moves then?
@trg_backyard4580 2 ай бұрын
If anyone is looking for the slide hammer and adapter to pull the bearing - Advance Auto parts: master loaner tool kit by PowerBuilt Tools, P/N 648611 (or) Autozone: slide hammer OEMTools 57033 and Adapter kit: OEMTools 57129). For the Bearing and race installer tools: Advance Auto loaner tool kit Powerbuilt: 648996 (or) Autozone: OEMTools 57119
@nghyvens9780 2 ай бұрын
I have a car infiniti qx70 year 2016 I need to start on key
@Mrfrags4117 2 ай бұрын
Great technique removing the fill plug first. Never the other way around. If the fill plug won't come out after the oil is drained you're in a pickle. Especially if it needs to get you to work in the morning! Great video.
@iKingPRTV 2 ай бұрын
Does this work if you replace an old sensor to a new one from a tire?
@stuffyoucando2 2 ай бұрын
No, that requires a different procedure.
@SF-fm7ov 2 ай бұрын
I added the mid strength Sumos to my 1/2 Ton GMC. There is about 3/4" space above them. I find the empty ride to be nearly the same as before. When towing my 8500-pound TT, it is more stable and rides like a dream. I use a WDH as well. There is absolutely no maintenance, and they should last as long as the truck. There is a small amount of sag but it is barely noticeable. I think the Sumo Springs are an excellent option for sag and handling safety. They were easy to install as well.
@danilo352 2 ай бұрын
Just did my oil for the 2nd time following this video. THANK YOU. I know very little about what happens under the hood.
@chelek1714 2 ай бұрын
How did you program it? My got disprogram and I don't know how to get it program again
@stuffyoucando2 2 ай бұрын
You should contact their customer service for instructions on your specific vehicle.
@NUCLEAR_ROACH 2 ай бұрын
What are your wheel specs?
@stuffyoucando2 2 ай бұрын
lmr.com/item/WTK-N1007LBZ/Mustang-03-Cobra-Wheel-Tire-Kit-Black-Sumitomo-94-04
@NUCLEAR_ROACH 2 ай бұрын
@@stuffyoucando2thank you love the truck
@stuffyoucando2 2 ай бұрын
@@NUCLEAR_ROACH thanks!
@jjpenny1 2 ай бұрын
Great video, thank you so much.
@laurenkreiger5899 2 ай бұрын
Can you do a video where a guy like me let the spider gears drop and now I’m in a jam. I have the gears out of the diff housing now but am Leary to pull it apart more…that weird S shaped piece between the 2 axle bearings is stressing me out
@stuffyoucando2 2 ай бұрын
Unfortunately I can’t pull mine apart to do a video on that. I had this happen to me once before when changing out an axle shaft because I forgot to elevate both wheels and I rotated the elevated side with the pin removed and didn’t realize the spider gears were coming out as I was turning it and they fell out. In my case I put them back in by placing them in the positions they were in when they fell out and rotating the wheel back the opposite way and the side gears moved them back in. It was a pain and took a few tries but worked, but I’d probably recommend watching some of the differential overhaul videos and finding that point in the process, but it will most certainly require removing that S spring.
@laurenkreiger5899 2 ай бұрын
@@stuffyoucando2 Thank you for your reply....I eventually got the gears back in place. I have another rear diff to rebuild so I think I will make a video as there us nothing out there that speaks directly to this problem :)
@best9642 2 ай бұрын
I will change my bulb after breakfast. Thanks for a great video and I subscribed.
@duvalle2004 2 ай бұрын
Do u glue everything? Or do all the parts click together?
@stuffyoucando2 2 ай бұрын
This particular model is all glue together.
@robvh2 2 ай бұрын
What kind of primer do you use? Is it really necessary or can you jump straight to paint in most cases?
@stuffyoucando2 2 ай бұрын
I talk about this around 3:30 in the video. In this case, I didn’t need primer as the touch up kit used a paint that acted as both primer and paint. If your touch up paint isn’t that type, then I suggest using an automotive primer, available in a spray can from Rustoleum on whoever else may offer that. Since you’re repairing a chip, applying it could be done by spraying the small amount of primer into something (a cup, bowl, etc..) and using an artist’s paint brush or q-tip to apply. I hope that helps!
@Kawiracer_435 2 ай бұрын
I use mine for all my gun parts works amazing
@couchfighter 2 ай бұрын
5.4
@stuffyoucando2 2 ай бұрын
5.4 liters…but 5.7 quarts as stated in the video.
@austondoughnut6232 2 ай бұрын
Helllllp what is the mhz for the autel to program it
@mason2481 2 ай бұрын
Mine does all this, but when it's time to reboot it just freezes up and doesn't reboot
@AshvinMakwana-d4b 2 ай бұрын
I noticed on the new brake pads the squealer is on the outside vs. the inside (the side with the piston). Shouldnt the brake wear indicator/squealer go on the inside?
@rontan8954 2 ай бұрын
Good observation...It should be on the inside. Not sure if it's going to make any noise or anything.
@AshvinMakwana-d4b 2 ай бұрын
@@rontan8954 it won't make any noise day to day but generally the pad that is touching the piston wears down quicker so you want that pad on the inner side.
@stuffyoucando2 2 ай бұрын
It would still squeal once it contacts the rotor. The general idea behind putting them on the inside is that people tend to think the pad on the piston side wears faster. I’ve never observed this to be true and feel the position of the squealer is a preferential thing. Personally, I think if you solely rely on this device to tell you that your brakes need replaced, you should rethink how you maintain your vehicle. You should inspect your brakes periodically to check wear, not rely on a noise making device with questionable reliability.
@captainrobots1 3 ай бұрын
so I'm assuming if the vehicle report not available I can still update without doing that step in 2024. I'm updated my car it was used but I have problems with sometimes saying that there's no Bluetooth device available even when my phone says its connected. yes I have the files on a flash drive.
@Keith-e5f 3 ай бұрын
I'm getting a set of the plastic ones and I'm going to completely fill all the cavities in the undersides of them with expanding foam. That should stiffen them up and make them more rigid.
@MrDevp1983 3 ай бұрын
Do you have a vid for the fronts? Awesome video btw
@stuffyoucando2 3 ай бұрын
Thanks! I do, it’s here: kzbin.info/www/bejne/iIqVm4h9h9pkf5Isi=UTcSY5wIoIDyqNEA
@MrDevp1983 3 ай бұрын
@@stuffyoucando2sweet thanks!
@wesblanford3024 3 ай бұрын
So what number is each bulb, top middle and lower?
@stuffyoucando2 3 ай бұрын
See 1:05 in the video.
@wesblanford3024 3 ай бұрын
Are there 3 different bulbs for brake light, backup light, blinker light? TIA. Did you change top and bottom bulbs at the same time?