7 ай бұрын
7 ай бұрын
7 ай бұрын
7 ай бұрын
8 ай бұрын
8 ай бұрын
8 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
4 жыл бұрын
4 жыл бұрын
5 жыл бұрын
Пікірлер
@NoComplyDistribution 5 күн бұрын
I have this error(varying last 2 digits) on a machine with less than 300 prints. Essentially brand new. Rarely used. Still the original toner carts. Oddly it only start3d doing it after i moved it from my house to my workshop. Any ideas? I mean i could understand on a well used machine, but mine is practically brand new.
@ShyRockFreak86 5 күн бұрын
@@NoComplyDistribution take the machine for a drive. Preferably sit the machine on a hard surface and make sure to drive on a bumpy road. It should dislodge the clump of toner that’s clogged in the dispenser.
@JoseVGavila 15 күн бұрын
Hello!. My HP M575 began doing this yesterday. It cleared after a boot but happened again. And today there is no way to get rid of it. So I ended here!. Even if I repair electronics for a living since 90s (my work is mostly on radio equipment), it seems a bit daunting work 😅 . But eventually, I should do it, as now I am printer-less and I need to print some things for my work almost daily (shipping labels and such). I will get back when I do the work. Thanks a lot for sharing it!
@phaselockloop8372 18 күн бұрын
Just did this repair on an HP M551, and i have another that needs it as well. I thought it would be as easy as the CP3525 but i found once i got it opened up the solenoid was locked in there. There is a metal tab on the side where the fuser entry that i just bend outward which made it easy to get the gear assembly out. I want to thank you for the idea of heat shrink wrap as i previously always used electrical tape since the hp 4000 laserjet days. it worked well but there was a few repeats after a long period where the tape would come loose. I had thought about using Plasti dip spray/liquid but it has way too long dry period for field repair. It might work if i had pre repaired solenoid that way but not viable in the field on call. Heat shrink wrap works really well and i don't have to worry about it coming loose. Thank you for posting these videos! I currently don't work for a company but have done printer repair for many years and always love to learn and see what other technicians can come up with as alternatives. Also, i don't know why HP still uses this silly noise dampening pad. They have not changed the design and i guess they don't care as it probably outlast the warranty before failing. It is however a shame because these solenoid pads will fail just takes a while.
@phaselockloop8372 18 күн бұрын
Also meant to add, the very first time i repaired one of these solenoids on a HP 8150, tray 3 addon feeder if i recall. I cleaned the pad completely off and thought it was just there for noise only. However i found out real quick the solenoid stays magnetized enough to keep the plate stuck in open position. Then the only thing i could think of was electrical tape cause it was all i had at the time on me. I used to order the solenoids new but they were old new. as in new in box, but old sitting on shelf for long time. So they new replacements seemed to fail rather fast within months even. Sometimes we ordered refurbished ones but they were hit and miss on quality and had high failure rate also. So i just stuck with tape. Heat shrink tubing never even crossed my mind!
@peterroath9290 21 күн бұрын
024-965 any ideas.
@ShyRockFreak86 20 күн бұрын
@@peterroath9290 www.google.com/gasearch?q=024-965%20xerox%20error&source=sh/x/gs/m2/5
@andrewt207 Ай бұрын
Top bloke ... I abandoned another video at the circuit board point as he wanted to strip the machine down to molecular level. Took it really slow but got there in the end. Did have 1 extra screw left [I think due to my note taking derailing at the swap over] but I was checking everything was tight and secure as I went - pretty sure it was one of the multitude of frame screws rather than holding anything important like the CB or the solenoid itself! Will monitor the patient and check the recovery is long lasting! Thanks again and [shortly], happy Hogmanay to you and yours from Scotland.
@ShyRockFreak86 29 күн бұрын
@@andrewt207 having a screw or a few leftover is almost mandatory for this repair..
@sutsyrhcsuzej Ай бұрын
Worked for me ;) First I was traveling with my printer(c405). Then I had this problem. I started to shaking my printer and rebooting for couple of times. Printer started to work. Thanks
@microsoftsarker Ай бұрын
THANK YOU
@oceanic8156 Ай бұрын
This worked! Removal was easy, put them back piece by piece was not easy, many tricks. Also, not sure why I got 3 silver screws left over..lol
@ShyRockFreak86 Ай бұрын
@@oceanic8156 3 screws remaining means you did it right
@behzadheidary8788 Ай бұрын
hi thank you for this Training. After doing this, the color settings of the device are messed up, and the quality of the colors of the device has decreased, is it related to these repairs?
@ShyRockFreak86 Ай бұрын
@@behzadheidary8788 make sure all your wire harness connections are secure. If you did not store your imaging/toner units in a dark cupboard or closet, that could also be a factor.
@rasmusfalbe7246 Ай бұрын
THANK YOU! I feel like a blind man who has made a beautiful painting. I am totally ignorant of these kind of repairs, but it worked like a charm - and I even earned 4 extra screws to my collection. Thanks again 😊
@SPACEMONK69POO Ай бұрын
Hello, I follow your instructions and I fix my printer, now its printing funny, I uploaded a vídeo where its showing how its printing, Its the only video I have, its actually a short, can you please check it, and tell me if you have any ideas why its printing like that? Right before it show the error 59, it was printing perfect, Thank you for your help.
@ShyRockFreak86 Ай бұрын
@@SPACEMONK69POO I would try the Black Toner cartridge, as it may have been exposed to light for too long(the imaging drum), or you might need a new transfer roller, the one that fits in the right door. Might be called the secondary transfer bias or something like that.
@ShyRockFreak86 Ай бұрын
@@SPACEMONK69POO but also make sure all your wire harness connections are tight and secure.
@SPACEMONK69POO Ай бұрын
@@ShyRockFreak86 thankyou very much for your answer, im going to try it out
@computersupport9612 Ай бұрын
Thats what i call field service.
@computersupport9612 Ай бұрын
Solenoid fix most of the issues.
@druip-u2m 2 ай бұрын
Hello! I was able to fix the 59F0 issue thanks to your video, but now its printing some lines, i made a vídeo to show you, here is the link, i appreciate your help, thankyou. kzbin.info39UO8uf46XQ?si=gkDAbXZ0Ni8kO017
@druip-u2m 2 ай бұрын
Thank You for making this video! You are a life saver, i have NO training what so ever repearing printers, but thanks to you I was able to follow your instructions in detail, I cant thank you enough!
@germanmartinez7560 2 ай бұрын
I have a problem with xerox WC6605, error 092-671, do you have any video with solution?
@ShyRockFreak86 2 ай бұрын
@@germanmartinez7560 sadly, no. Good luck!
@macmartintoub 2 ай бұрын
Thank you so much, with your help I Managed to fix the Printer! Awesome! 🎉
@nauip 2 ай бұрын
The same frustrating issue happens with the c405's brother - the 6515. It's probably the high humidity where I'm at. If you happen to come across one and can make a video on how to replace the appropriate part on the 6515 I would greatly appreciate it. I keep getting 092-318 ADC Y Patch System Fail and I am using a genuine cartridge.
@DavidNicholds2 2 ай бұрын
I don't fancy taking the entire thing apart just to change a toner dispenser...
@ShyRockFreak86 2 ай бұрын
@@DavidNicholds2 I don’t either. Wasn’t til after I made this video that I learned to just take the printer for a ride in my van around the block on a few bumpy streets.. dislodges the clumped toner stuck in the dispenser..
@DavidNicholds2 2 ай бұрын
@ mine was broken so I had to take it apart in the end to change the toner dispenser. You video was most helpful at the point where you pointed out loosening the 4 screws for the main drive gear instead of removing the main drive gear so that you can remove the manual feeder - many thanks.
@ronij891 3 ай бұрын
I have a similar problem! The black toner error code 092-321 keeps coming on and I don’t know what to do
@kohnhead72 3 ай бұрын
Having this issue with yellow (092-318). very frustrating. Please let me know if you find a solution
@kohnhead72 3 ай бұрын
Just fixed this issue. We were missing the waste toner box. once we added it, the error went away and we could start printing. We also cleaned the transfer rollers using the built in cleaner tool under the black transfer roller
@kristenkuntzman6640 2 ай бұрын
@@kohnhead72 I am having this same issue with yellow!!- what is the waste toner box? built in cleaner? I just replaced the toner and it did nothing :(
@NicolaBeole2003 3 ай бұрын
This tutorial also work for CP4025?
@ShyRockFreak86 3 ай бұрын
@@NicolaBeole2003 sometimes.
@waswoschdu 3 ай бұрын
Thanks a lot. I managed to fix my beloved HP 3525x Laserjet thanks to your video. Encountered problems and hints: - after fixing the sticking solenoid with shrinking tube (12:56) and building everything together, the 59.F0 Error still occurred (making me mad) - I opened the printer housing again and turned the motor as shown (14:58), but like the first time, the inner cogwheel (15:13) wasn't turning as if the solenoid was already set. Solution: softly open the solenoid flap with a screwdriver from above (no need to remove any of the circuit boards), then turn the motor clockwise until the inner cogwheel (was now turning) stops turning with a clicking sound and the solenoid is set again. After building everything together no more error messages occured! Yayyyy... Hint: remove the CPU Board (4:39) first, then it's way easier to remove the back sheet metal cover (2:54).
@felisbertocambuta1877 3 ай бұрын
Just to be specific, is this fix related to sensor SR17? I am having an issue with an M551 showing error 59.00.F0 and points to that sensor.
@ShyRockFreak86 3 ай бұрын
@@felisbertocambuta1877 which sensor is that?
@ShyRockFreak86 3 ай бұрын
@@felisbertocambuta1877 I suppose that sensor comes into play with the error. It’s all transfer related.
@saleemnls 3 ай бұрын
i did the same thing for this 59.00.F0 error. Now printer seems working fine, Let us see if again this error reoccurs or not. I will update after some days of observation.
@ShyRockFreak86 3 ай бұрын
@@saleemnls if you cleaned and installed a good pad on the solenoid, that error will not occur again for the solenoid. If the error occurs again it will be fuser drive assembly
@saleemnls 3 ай бұрын
@@ShyRockFreak86 Thank you for the comment and for your video
@g10ck22 3 ай бұрын
Done! And it works! Thank you! What a simple fix, most folks would just toss it and buy another. We'll see if I can get another 10,000 prints out of it,.
@ShyRockFreak86 3 ай бұрын
@@g10ck22 you’ll get another 100k out of it without getting that error again.
@servitcmj1553 3 ай бұрын
Excelente!! Gracias
@chuckp7970 4 ай бұрын
Excellent! Your video was well detailed and provided a fix for a common error. So instead of recycling the printer it is now running strong again, hopefully for many more years. Eventhoug I walked through step by step with your video, I also ended up with a couple extra screws, but we wont talk about that. 🙂. These are great printers, solid, reliable (mostly) and free from all of the BS of current printers. I hope I can keep my 3525 going for many more years ( I now have a parts printer too). Thanks again!
@ShyRockFreak86 4 ай бұрын
@@chuckp7970 glad this helped
@janpedersen9120 4 ай бұрын
this is one of the best videos out there, doing this.. i followed it step by step, and my HP is now running again, so gratefull no skipping of parts .. from start to end.
@g10ck22 3 ай бұрын
I followed the steps - I did end up with 1 extra black screw, lol!!!
@fotokopiandalus9264 4 ай бұрын
I have an hp m4555mfp with same problem, please tell me how to solve it??
@ShyRockFreak86 4 ай бұрын
@@fotokopiandalus9264 I’ve never worked on that machine, but there are a few things to check initially. Check the paper size cassette to ensure it is snug against the paper. Make sure the paper settings in the machine menu match the contents of the paper tray. Otherwise you’ll have to determine if it has a solenoid or motor driver assembly for the paper feed assembly. Replace or clean the findings.
@SergeDugal 4 ай бұрын
Thanks for sharing.
@Paramike86 5 ай бұрын
Did the same procedure yesterday and the printer is up and running again. No screws left! However the screen doesn't turn on, I think I forgot a connector.
@bigjay52 5 ай бұрын
🫡 Thanks. I was wondering if those 2 Vendors(Danny & Cassie) were available to buy from at level 31. Since I can't reroll my level 40 exotics down to a 31 like before....👍
@ShyRockFreak86 5 ай бұрын
@@bigjay52 recraft the exotics.
@usteo8349 5 ай бұрын
May I know this apply to M551 model, alarm 59.00.A0
@ShyRockFreak86 5 ай бұрын
@@usteo8349 try checking the transfer belt, or replacing it first, if that doesn’t work, then yes, clean the solenoid. However, there isn’t a handy “window “ plate to access the solenoid without removing the whole fuser drive assembly This video demonstrates the process kzbin.info/www/bejne/gYLTiYOjqJKrnqssi=FxmEHJMf-jAs4V1l
@NB-kd8yw 5 ай бұрын
Top man!! Mine errored this morning and now it's fixed!! 15 years old, and now, thanks to you, still going strong. Thanks so much :D
@ShyRockFreak86 5 ай бұрын
@@NB-kd8yw glad I could help!
@meowmeem 5 ай бұрын
*me googling how to fix my HP CP2525 error* - you lost me when you pulled out a screw driver LOL oh my gosh why are printers such headaches.
@emmanuelibus 6 ай бұрын
I've been replacing solenoid pads for 14 years now. A lot of older printers have this problem.
@ShyRockFreak86 6 ай бұрын
@@emmanuelibus yes, horrible design by HP.
@mg8720-u7j 6 ай бұрын
The plastic auger for the toner dispenser gets broken when it clogs. Must replace it.
@kohnhead72 3 ай бұрын
Care to explain? Is the plastic auger a part of the toner cartridge? Or the printer itself? My yellow toner is giving this issue, and I don't feel like taking it for a ride lol even though I do love that solution
@mg8720-u7j 3 ай бұрын
@@kohnhead72 There are 4 seperate toner dispensing tubes for each color. You have to follow the instructions to replace the one that is clogged. Its almost always a broken plastic auger inside the dispenser unit which you cant see without removing it. Taking the copier for a ride will only make it worse. The Parts Drop sells these parts and can print out the directions. Just google up the Parts Drop in New Jersey. This repair job is not for beginners.
@hamradiotimes5586 6 ай бұрын
Complete garbage.
@ShyRockFreak86 6 ай бұрын
@@hamradiotimes5586 my video? Or the printer?
@spyder1857 6 ай бұрын
Hello I also have the C405 Printer and it has now decided to print black in a light gray . I replaced the drum thinking it may be the issue and it started to print correctly. Until about a month ago, now it only prints in a light grey print on black and whit only mode, no toner saver mode, paper type is still the same as it was, removing and reinstalling the toner cart was not the issure, remove and reseated the drum, not the issue. So I am thinking that the toner is not dispensing correctly and being channeled down to the drum like it is clogged or has a blockage of some sort. Any Ideas? Thanks
@spyder1857 6 ай бұрын
The Toner is a 68% full on the black I forgot to mention and the drum has maybe printed 100 sheets since replaced. I am out of idea's. Help....
@ShyRockFreak86 6 ай бұрын
@@spyder1857 I would try replacing the transfer roller. But I have a feeling it’s the MCU board not giving the correct voltage.
@spyder1857 Ай бұрын
@@ShyRockFreak86 Is it possible that the Auger could possibly be bad as there had been some plastic popping sound from the toner cart area, it has not done it in a while. Then as a test I replaced the drum unit and it worked for about 7 months and its back to light print again. My initial thoughts were the Black toner trey and auger solution, is this trey available to purchse? If so do you have a part number to order or search online for? Is there a reasonable repair center in Wichita, Ks. As a 400.00 service call is really steep for the repair of a printer now days. Any help would be greatly appreciated. Thanks
@wakeeleffendi 6 ай бұрын
Great👍 many thanks🙏
@jessicafroehlich1564 6 ай бұрын
How did you clean out the feed auger?
@ShyRockFreak86 6 ай бұрын
dump it in the trash.. but, I'd recommend taking the printer on a small road trip for a few blocks, making sure it's a bumpy road.
@donnydonnystevenbrown1253 7 ай бұрын
Good project
@JoeyXeno 7 ай бұрын
Looking fucking great dude! Amazing work
@twomutts_2buttz414 7 ай бұрын
Games and stuffs to do galore haha. Looking great Shy!
@AlexandriaCustomsPC 7 ай бұрын
A lot of good knowledge in this tutorial, helped a ton!
@PrintCenterOficial 7 ай бұрын
Eu tenho uma M551 e só dá pra retirar o solenoide retirando todo o motor. Foi um parto, mas resolvi. Parabéns pelo vídeo.
@timmigrant6597 8 ай бұрын
Have you ever seen syscorr at dz30 vendors?
@ShyRockFreak86 8 ай бұрын
not yet.. I'll keep checking for another week or two, but I have a feeling it's not available for level 30
@croquis24 8 ай бұрын
PLZ DO NOT LISEN THO THIS TECH THE CODES AVE NOTING TO DO WIT THE ROS (LASER ASEMBLY ) THE CODES INDICATHE THAT THE TONER DENSITY IN THE DEVELEPER INSIDE THE DRUM IS TO LOW DO TO CLOGER PIPE PREMATURELY EMPTY TONER OR THE DEV LOST TO MUTCH DEVELOPER METALIC PODER TO APLY THE TONER THIS IS A WELL KNOW ISU AT XEROX BEST IS TO REPLACE THE DRUM KIT A REQUEST A RMA FROM XEROX THER A PDF FORM ON THE XEROX WEB SITE
@croquis24 8 ай бұрын
i am a msp setefide xerox diamond partner and i ave acces to the same diag manuals as he dose and ther noting about the ross under those codes its sad and i hope rhis is a warenty call cause hes troing the parts canon and tons of hr of labor for sumting that thake 10 min to fix just the ros is like 1/3 the prise of a new machine i am very mad at thi tech
@orglidi 8 ай бұрын
hi. i wanna ask you something. i had a printer model HP LaserJet Enterprise 700 color MFP M775dn, got problem with tray 2, paper got jam every time. usually problem with pickup solenoid. the question is, where this solenoid located? do you have a video or guide that i can follow to reach the solenoid?
@ShyRockFreak86 2 ай бұрын
This model probably has the pick up motor with solenoid in a small assembly, but I have a feeling it’s the plastic bushing that sits in the hole of the frame for the main pickup axle. I have not attempted to replace that bushing to see if that would fix the issue, which is a no pick misfeed jam, I presume. The process is similar in that you disassemble the machine and remove anything in the way of the pickup assembly. Things like the DC Controller, Low Voltage Power Supply(maybe), and brackets.. I’ve never had an M775 torn apart to know exactly.. I imagine the inside is similar to the CP4525, or M551/575 in that the pickup motor and solenoid are housed together in a bracket with a few gears assembly. Good luck
@retro61 8 ай бұрын
Appreciate you covering these level 30 vendors. Good to be able to see if there's any of the the max attributes that I'm still missing in the recall library
@retro61 8 ай бұрын
*recal [sighs]