I have a 2015 Ford Transit cargo van it's got all that dam plastic trim around it including both bumpers are covered in plastic i am thinking about using this ( PENETROL ) and adding a little bit of mineral sprites to it and going over all that plastic trim someone on youtube has a video and says it works great. Using a little mineral sprites i would think will help it to absorb into the plastic and help it to dry.
@JohnIskenderian-r9o3 күн бұрын
Sir, what if you don’t have the key and you got a new switch when you want to put it in
@RustnAway3 күн бұрын
Break out the drill and drill out the old lock cylinder.
@Aaron-hd8ql12 күн бұрын
Brilliant video straight to the point. Will try this soon on my 71. Thanks again. God Bless.
@Channel--Ai18 күн бұрын
Comet wash first perhaps
@auxc.680520 күн бұрын
Exactly yhe info i was lookin for. Dont want to break my old socket, but hopefully i can bend the metal pieces back and push it out. Good video.
@JackBlack-qb5wc28 күн бұрын
Rustn; i know this thread is a couple years old, but would you happen to have the part number you got? your link takes me to a page that shows a bunch of them. i just want to order the correct ones for my C10 thanks ..Mac 😁
@brentbarr498Ай бұрын
Thank you a TON! I've been looking for a definitive "been there, done that" video concerning the Lokar kits. You're the BEST!!
@ThisIsToolmanАй бұрын
If, before removing the old switch, you tie a string to the end so that you pull the string through with the switch, you can use the string to pull the new one back through the column.
@dandyscornerАй бұрын
BEAUTIFUL old wagon sitting there!! Researching Columbia Coatings items to start coating our own products, but appreciate the wagon more than what I originally came here for.
@ceansilorcaso5820Ай бұрын
Are you using linseed oil only? and how would it got or what will happen if you used in a aol fade plastic bumper?
@zoogii7695Ай бұрын
Tnx
@andresmedina2827Ай бұрын
What driveshaft did you use? Im doing the same drivetrain on my 86 c10
@coryhalling1614Ай бұрын
Im new to the air bag world. What shocks do you use? Thx
@marcushaynes843Ай бұрын
Leave the 383 where it is.
@PeterHatch-mx7zc2 ай бұрын
Just sub up that's for the video👍😁
@Bradp182 ай бұрын
My shock angle is a bit off once it’s installed. Any advice?
@Dathatch_boi3 ай бұрын
Exactly what I needed
@adamfonzarelli83184 ай бұрын
Hey man did you have any issues with the rear bags being too close to the axle tubes? Also did your swaybar hit the outer tierods when aired out?
@RustnAway4 ай бұрын
Not at all. I’ve had this setup for 4 years now. Only issue I had is a sway bar endlink broke but that’s it.
@jZXDvcjb4 ай бұрын
That air cleaner is awesome
@cptafw5 ай бұрын
I have seen “Holden horn pad assemblies” for sale from Australia, but it doesn’t specify that it includes the airbag. Can the assembly be taken apart further to simply replace the pad?
@tjed10715 ай бұрын
What size are the wheels?
@Andrew-ff4hh5 ай бұрын
The issue with old trucks is that the tail lights ground through the box of the truck. Over time the box has a poor ground connection to the frame, which leads to dim/not working tail lights. You should solder a ground wire to the bulb socket and run it to the frame of the truck. (I recommend running your negative battery cable to the frame as well, and redo all ground straps too) What I did on mine is I bought the tail light sockets that have a ground tab where you can add a ground wire. This issue had me tracing wires for two weeks! hope this helps.
@justinsane71285 ай бұрын
Penetrol Flood
@leinie66835 ай бұрын
Ditch the shitty music and narrate
@TommyJensen-pl8qz6 ай бұрын
when you had the drill anyway, you could have drilled out the old socket
@cliffolivent79016 ай бұрын
What ever happened to work boots
@jeantaylor67856 ай бұрын
Use penatrol it works good
@jrbulldogpuller6 ай бұрын
I have a lot of spare parts, set of louvers too practically new, went with track spec louvers on mine and took out the stock. In WNC let me know if you are interested!
@rubendickens20186 ай бұрын
This video was very helpful. And this Lokar kit is the best dont waste your money on any other kit. Thanks again
@jessiemaningo49286 ай бұрын
Hello, what was the part number for the new sway bar end links?
@clawged7 ай бұрын
I like how in the beginning of the video he talks about buying the sponge and stuff but never shows you what’s in the can lol.
@TheddreaJackson7 ай бұрын
On my 1964 chevy used 1970 on up truck
@MOE135768 ай бұрын
5:50 that shi is now $100 🤦🏻♂️
@gregstreuber8 ай бұрын
Nice work. Thanks for the video. You answered all of my questions.
@Andrew-ff4hh8 ай бұрын
On those sockets the two wires are black. How do I know what to wire to if there not color coded?
@shadowrockcairns83908 ай бұрын
Why is that unit tilted forward so much??
@osvaldoesquivel56338 ай бұрын
I don't recommend this stuff, I've been using it on my car because it's affordable, but everytime it rains or is too cold outside, car looks like it has dry soap all over. I don't recommend this!!!
@tomneldon67918 ай бұрын
What is it?
@garykirkham13899 ай бұрын
Why don't you use water in the pan?
@isaiasmadera69979 ай бұрын
What year model is that transmission? I have a 6.0l lq4 im trying to get swapped in my s10 and i have a 1996 4l80e but im not sure if the standalone harness will work the transmission
@edgar_3899 ай бұрын
Do you know where can I get a new switch for my 72 c10
@phildoleebowitz53359 ай бұрын
Big fancy shop and no 2500$ lift to make this and plenty of other jobs way easier to do without getting hurt or stressed.
@Khass19xx9 ай бұрын
I am a 12 Year Military Combat Veteran with three Combat Tours - I cried watching this.
@jessdigs9 ай бұрын
Will this work with a 10L90E on an LT4?
@theoriginalkeepercreek9 ай бұрын
How in the world could this amazing, light show have only 37 likes? I felt like standing up with hand over my heart! Over a thousand views and only a handful of likes? Come on people, show your patriotism and click the like button! 👍
@3ximR9 ай бұрын
Hey, are they 2.5" drop spindles?
@remii20510 ай бұрын
Hello everyone, anyone has some time to explain to me why they would convert from 4wd to 2wd? AWD 600 hp ripping down aa highway sound epic to me.
@pcass6710 ай бұрын
I tried to lookup your steering wheel puller that was used when I clicked on your page, but the site didn't show it! do u have the part number? Also do u have a video that shows where the ground wire go's? Thanks
@joselouru10 ай бұрын
I think you put the end of the bushing upside down , the last piece