Do I have to take off the hole chain from the back just to do the front sprocket or I just unscrew the front sprocket and put on the new one ?
@JohnVHLifeКүн бұрын
as I show in the video, nothing on the rear has to come undone
@jet_lif367919 сағат бұрын
@@JohnVHLife ok thank you 🙏🏾
@davea24072 күн бұрын
Who says it holds that much fluid? The power torque filter box says it only takes 3.5 quarts and O’Reillys’s specs says 3.49 quarts for a fluid change.
@JohnVHLife2 күн бұрын
The internet.
@breadnbutterpk2 күн бұрын
thats not a high idle thats just what the car idles at ive had 3 s197s and theyve idled at 1k rpm
@brazoon12 күн бұрын
Just received mine today. Installation was easy and this video is great for those of us who can't be bothered to read instruction! lol
@JohnVHLife2 күн бұрын
perfect! That is my goal!
@Milad-ll7mh2 күн бұрын
New sub earned 🎉
@JohnVHLife2 күн бұрын
Much appreciated!
@mauiboy967683 күн бұрын
Is there an internal filter for the trans to change out or no? There’s gotta be a trans filter it’s automatic..🤔
@JohnVHLife3 күн бұрын
You bet, it has one, the only way to get to it, is to remove the transmission and split the case, terrible design, sadly.
@jeffmerz35954 күн бұрын
Ugh Chrysler vehicles are nightmares, just get a Toyota
@EvanPobar-yz7vk4 күн бұрын
I got one but it won’t solar charge .. what am I doing wrong? Doesn’t it just sit in the light/sun?
@Thomas-yr9ln5 күн бұрын
Mine never worked properly the buttons very hard to push. There must be zero quality control.
@TheCaperfish5 күн бұрын
any chance you can measure all the dimensions on that , I just made one but thinking I could get it working better if I made it the same as that one , im learning the hard way there is a little more science behind it than just slapping one together ,made a pool heater out of it , getting 110 on the output to pool
@wokndedfan4135 күн бұрын
I’m seriously looking at AGM PVS 7 3AW1. Wonder about mounting system though
@JohnVHLife5 күн бұрын
Yeah. That’s the issue I have had. I’m going to have to make something.
@robertblahnik76856 күн бұрын
What change? The baffles are designed wrong, and the packing too tight.
@mr.d39546 күн бұрын
I bought one of these a month ago and I'm out in the garage fixing to install it on my angle grinder, I took that blue plug out it fell apart and I'm thinking let me go see if there's a video on this and see what's going on so thank you. haven't put it on yet but it looks fine on your video from what I've watched so far
@ss_ramsay6 күн бұрын
thank you :)
@stephennickles73896 күн бұрын
Thanks, I just soldered up the wires and plugged in my new Kenwood , and nothing but the display came on, short of time, I didn't go further, now I see how to get things going thanks to your video. I probably won't use all the features, but I did want a clock in my 91 F150!
@marcelbrand64417 күн бұрын
Danke!
@JohnVHLife5 күн бұрын
Thank you so much!
@brandoncarpenter58348 күн бұрын
Garbage don't buy
@sledhedone8 күн бұрын
this is exactly what i wanna do, like the slip on, but way too loud, my ears ring horribly. thanks for the awesome vid!!!
@Will_Bx_NYC_7188 күн бұрын
LEDs don’t go into reflector housings, they’re meant for projector headlights. You’re blinding all oncoming traffic with your lights.
@-MrRichBiker19679 күн бұрын
I just bought one myself, today. didn't realize it was the loudest hedger I've ever owned my whole life!😮😮😮
@recryption62010 күн бұрын
I I'm not sure if my jeep is cvt or normal how can I tell. I gave the vehicle to my daughter and it is whining now. The owners manual doesn't say. I tried casting advanced with the Vin # they were no help.
@stephenmoretti325210 күн бұрын
Stick to riding
@JohnVHLife10 күн бұрын
Ouch. Zinger. 🤣
@LindaKeller-kv8pw10 күн бұрын
Howbdonyou detach the nozzle from the trigger I tried the half turn and oull but wont come out
@LindaKeller-kv8pw10 күн бұрын
How do you detach the nozzle from thr trigger
@LindaKeller-kv8pw10 күн бұрын
How do you detach the nozzle from the trigger
@geralddietz457710 күн бұрын
The finest shooting machine I have ever owned.
@bmngfails13011 күн бұрын
hey i have the exact same set up, i have 2 questions for you 😅 how long did you wait until you went all out with it, do i have to break it in? and also what settings are you using on your amp, im a newbie and would like to copy your amp settings, Thanks!!
@SonnyFisher-np1tf11 күн бұрын
what are the chargers called mine broke it would be really helpful if anyone can tell me or send me a link
@alirezavancouver12 күн бұрын
Thank you for taking the time to make this video. I lost the manual & it's been a long time since I used this & forget how to pair it to my phone. Thanks to your video I have was able to pair it to my phone & listen to game 3 of Stanley Cup as I am pressure washing. Thanks again 👍👍🍻
@StephenBrenner-og8vk12 күн бұрын
Mine has been sitting disassembled on my basement floor for a month because I don't understand the instructions
@SkiMaskGringo10 күн бұрын
I can’t figure out how to assemble this shit
@StephenBrenner-og8vk10 күн бұрын
@@SkiMaskGringo i couldn't have said it better myself lol. AND this shit box was missing parts
@leilaclarridge580712 күн бұрын
I got two Pocket Vacs, which are similar aside from being an as seen on tv product. They work well, it’s just that the battery breaks if the vacuums are dropped on the floor from even just a couple feet up. I’m getting one of these since I’m hoping it will be a sturdier product that won’t break if I look at it funny.
@victormanuellopez288912 күн бұрын
Hi, did it come with remote controler? Thnks
@JohnVHLife12 күн бұрын
no
@naemamohamed466413 күн бұрын
Thank you so much for the instructions. Really helped me. I’m having an issue with the soap part. How does the soap come out of the machine. Mine is just spraying clear water?
@JohnVHLife12 күн бұрын
Is the soap too thick? is the pickup tube bent or plugged?
@JohnVHLife14 күн бұрын
Mercon LV Transmission Fluid: amzn.to/4bTsTH3 Oil Pan: amzn.to/3yTCUW6 Car Ramps: amzn.to/3XlDJBe Jack Stands: amzn.to/4b31bWS Headlamp: amzn.to/3KJzBTK Inexpensive funnel: amzn.to/3Ropx6m Funnel is optional. Links are affiliate, free for you to use but give me a tiny commission to help me make more videos for you! But here is how I did it in my 2014 Ford Flex Automatic transmission fluid change.
@happymonarch14 күн бұрын
Can you explain WHY I need to replace the plugs and coils if I replace the pcm?
@JohnVHLife14 күн бұрын
Because bad plugs and coils can make the PCM fail, so if that was the reason, and you only replace the PCM, itll fail again.
@happymonarch14 күн бұрын
First, thank you for the reply. Second, I know that, but can you explain why or how it can make it fail? Thanks again.
@JohnVHLife14 күн бұрын
@@happymonarch not sure, they may short out or who knows, but this is the recommended procedure so you wont have the issue twice in a row.
@badbob14 күн бұрын
I hope by now you have invested in a welding table.
@JohnVHLife14 күн бұрын
Kinda, I build a janky thing to get off the ground. haha.
@matt844515 күн бұрын
Awesome
@damnshowdude15 күн бұрын
Are they dangerous?
@JohnVHLife14 күн бұрын
Nope
@derickmccarrell959315 күн бұрын
Thanks for the video. I accidentally threw away the manual and never knew how to calibrate it! Now I know, thanks!
@robertspencer349016 күн бұрын
What would you say the decibel difference between the three. I purchased Shark Roads, and they are way too loud for the neighborhood.
@JohnVHLife12 күн бұрын
Oh man, not sure, but stock is exhaust was super quiet, and unpacked they were too loud, packing them made them sound just right.
@bluemonk4416 күн бұрын
I have one of these but it doesn't charge my devices. An I missing something? Is there a button I need to press to make it charge?
@cjcallen597416 күн бұрын
that small rp350.1 amp is a decent little amp, i paired it with a vd 10 in a underseat port box in my silverado and it is a great combo.
@coolbreezez7116 күн бұрын
What do the 2 larger hoses under the carb connect to ? Not the little skinny one off the bowl . But 2 larger ones . Do they connect to the carb ?
@moosepowernation544317 күн бұрын
I put my motor on mine and didn't line up the tc holes how much of a pain is it gonna be to line them up lol
@JohnVHLife12 күн бұрын
Should be able to spin the TC
@GaryStarks-se9qw17 күн бұрын
Clean it before you shoot it.
@davud.il717 күн бұрын
Im considering to buy one but can you tell me how long battery lasts
@JohnVHLife12 күн бұрын
I have not ran it solid through one whole battery pack, but I think it would do a car no problem
@shontaenorwood707618 күн бұрын
Thank you for the video! I just received my order and couldn't figure out how to open the clear box with the blades 😂. I'm a first time homeowner and need the saw for easy clean up around the yard. This is my first saw. I think this will do the jobs!
@JohnVHLife12 күн бұрын
You're welcome!!
@tazman869719 күн бұрын
I can piss further than this piece of crap that I foolishly bought to deter the neighborhood moggies...Oh well, back to the slug gun....
@k.m.h748020 күн бұрын
Thank you
@oldasdihrt599320 күн бұрын
Thanx for helping me to not make the mistake in buying them. Not that it was a mistake necessarily for you but i am no good at putting in diodes or resistors. I DID want them , but I'm just too old for fixing anything.