Badalaxe

Пікірлер

@Da-joker41 Ай бұрын

WTF never showed the bumpers 🤬🤬

@bommenpro5 Ай бұрын

Only problem with glueing on the wrap is if the wrap ever fails the plastic cover will go off with the wrap.

@ReimaginedWraps Ай бұрын

You just have to use a blade to cut it off of the antenna the way you cut it off of the roof.

@ReimaginedWraps Ай бұрын

Use a small knife ir scraper to scrape the glue/ wrap off of the mating surface on the antenna

@bommenpro5 Ай бұрын

@@ReimaginedWraps I was actually refering to the time if the wrap fails or cracks. Then the water will be able to get in underneath the wrap and into the car and the expensive module. Might be a good idea to gut the wrap just outside of were the glue will be. Just as a precaution against the water. Anyway. Thanks for the tip. Helped me remove the cover of a 2018 g31

@ReimaginedWraps Ай бұрын

Ohh i see, great consideration! Its worth it to take the extra precaution to clean thoroughly around the antenna and make sure it is heat checked and sticking properly before the antenna is installed. In the many years that i have used this method i have had no issues with the wrap lifting underneath the antenna. Its is also covered by the antenna so it is not exposed to the elements under that small section if glues properly. It can always happen though and great to consider and keep an eye on.

@ReimaginedWraps Ай бұрын

Glad i could help!

@mikekeyz9931 2 ай бұрын

I need to order that grill for my car 🔥🔥🔥

@roguereaper6262 2 ай бұрын

What tool is that??

@MUSSECK 2 ай бұрын

All that work to remove a year later if anything and the paint under it’s done

@ReimaginedWraps 2 ай бұрын

It sounds like you had a bad experience with Some wrap

@marcusgomez1372 2 ай бұрын

How do you take that inside part off boss

@minimeee04 2 ай бұрын

Cheese wire is cleaner and quicker.

@iramleyva 4 ай бұрын

How much?

@crazzypanda1176 4 ай бұрын

Do you have links for the turn signals and brake lights you used?

@austenschnelle4052 5 ай бұрын

Where did you get that carb from?

@ReimaginedWraps 5 ай бұрын

@@austenschnelle4052 performancemad.com! They sell all kinds of really cool parts for the predator 670s.

@CrustyXL 5 ай бұрын

That color is amazing

@ReimaginedWraps 5 ай бұрын

@@CrustyXL we installed this vinyl wrap on my brother’s Focus ST. He no longer has the car but we really enjoyed that color too when he had it.

@Joe4449 5 ай бұрын

Just removed my stripes today using your method. Great Vid!

@ReimaginedWraps 5 ай бұрын

@@Joe4449 thank you so much for the positive feedback. I am glad that this video was able to give you some helpful information

@Queenieb03 5 ай бұрын

Hi how much was it total for new grill / customization & kits? Also where are you located? Love the work 🙏🏻

@nexusly6720 6 ай бұрын

Make me now be aware if i ever buy a wrapped vehicle DONT! hiding a crazy story

@Eweazy-mh8gd 6 ай бұрын

How much lighter is this hood than OEM? Any good weight savings besides looking awesome?

@ReimaginedWraps 5 ай бұрын

@@Eweazy-mh8gd it was noticeably loghter than the factory hood. We never did any official weight measurements though.

@ZackBadCompany1234 6 ай бұрын

Did that clutch work for that engine?

@ReimaginedWraps 6 ай бұрын

I havent had a chance to get it back onto the bike yet unfortunately. I do plan on upgrading though, this is a bomb waiting to happen

@ZackBadCompany1234 6 ай бұрын

@@ReimaginedWraps very curious I have that same clutch on the same engine I'm in the process of dropping into a lawn mower

@JesseRizo 6 ай бұрын

🔥🔥

@BuzzaFlexx 7 ай бұрын

Will the lip kit fit a xts 2015 ( the cts 2022 have the same dimensions as the xts?)

@dadsrock4252 7 ай бұрын

Go old school and make one just saying

@ReimaginedWraps 7 ай бұрын

Was going to go with sealant but i was worried about the back spacing of the cam and crank. The case is what holds the back end of the shafts into the engine. The gasket thickness is specific in that sense

@frosthoe 7 ай бұрын

dont drag seals across rust, it ruins then the very first time you do it the lips are scratched. ALWAYS, wire brush, sand gently, or wipe with oily rag. and only remove on aan oiled shaft. dont be shy, oils cheap. Go easy coax it off, then before assembly Emory or 1000 grit it til smoth-ish. Not too much be sparing, and NEVER sand or wire the shaft and seal lip interface area. Old performance machinist here. Best wishes. Ps those stock connecting rods suck, be careful! They are made from hopes, dreams, and cost cutting measures. AKA nearly useless for real performance. They WILL fail without an Rpm limit..Wiseco proforged pistons rings pins clips and some decent Cro Mo beam rods, and a stud kit will save the entire engine. PsPS only run 100% synthetic oil. ...Dang I left a graveyard of Briggs and IH back then... I once tried to run nitrous on a briggs with no added fuel. Blowtorch Briggs go screeeee clank a clunka and shot sparklers out the exhaust. I was 13...I didnt know it needed fuel too...lol

@ReimaginedWraps 7 ай бұрын

So much great information!! Thank you so much for taking the time to leave this comment to help me and others out. Thank you for watching my video as well!!

@lyonknives1784 7 ай бұрын

Yes. Definetly save the pieces.

@joelnicholson8606 7 ай бұрын

Looks like a $1600 wrap lol

@icyroads3431 7 ай бұрын

how many feet of vinyl wrap did the wing take to do?

@ReimaginedWraps 7 ай бұрын

I wish i could answer this question accurately for you, this was many years ago and i dont fully remember. If you were looking to wrap the complete wing you could order 6ft and that should do the trick.

@icyroads3431 7 ай бұрын

@@ReimaginedWraps ok thanks man just ordered some carbon fiber wrap for mine!

@ReimaginedWraps 7 ай бұрын

@icyroads3431 very nice!! Its going to look great!

@craigpennington1251 7 ай бұрын

I've come to realize that you must have all the necessary parts even before you dismantle that engine. Makes things go so much easier.

@ReimaginedWraps 7 ай бұрын

Having the gasket would have definitely sped this up for me

@snooka2484 7 ай бұрын

I would have my truck wrapped by these guys simply because of this video. I love it when shops call out other shops on poor workmanship and then showcase their own work in comparison. Good wrap btw

@ReimaginedWraps 7 ай бұрын

Thank you for watching the video!! I hope this was able to bring some value.

@loadedtomcat 7 ай бұрын

I can tell you guys weren't popular at all with your teachers

@swornimyakamithemtbrider9724 7 ай бұрын

Cost, location , Of doing it

@ReimaginedWraps 7 ай бұрын

I ended up closing my shop and i am not offering any vinyl wrapping at this time.

@JesseRizo 8 ай бұрын

🔥🔥

@MigookNomNom 8 ай бұрын

Spring compression was difficult to watch; luckily you didn’t get hurt.

@ReimaginedWraps 8 ай бұрын

Im not a big fan on those old harbor freight spring compressors myself. Luckily i have since found a really cool spring compressor that mimics the style that we use at Mercedes Benz when we replace struts in shop. I feel so much more comfortable with the new tool! Thanks for watching the video!

@MigookNomNom 8 ай бұрын

@@ReimaginedWraps harbor freight works… once lol just gotta be safe and do it between 2 tires.. I’m old school

@Mister75199 8 ай бұрын

Guy probably DIY

@ReimaginedWraps 8 ай бұрын

Unfortunately i knew exactly who did this and it wasnt himself

@venusfan 8 ай бұрын

Alot of us are having problems with that very same thing leaking and BMW playing the expensive module right underneath so if it ever leaks it will go into the module. I'm hoping for that class action lawsuit.

@MegaDMan2323 8 ай бұрын

Should not be using a jack stand anywhere except where the jack pads go.

@ReimaginedWraps 8 ай бұрын

Its a good thing you cleared that one up

@squaaaad6773 9 ай бұрын

Hi, i need calibrate radar after removal bumper?

@ReimaginedWraps 9 ай бұрын

The official instructions will tell you to calibrate the cameras that were removed. We did not calibrate it and we had no issues

@squaaaad6773 9 ай бұрын

@@ReimaginedWraps Thanks for fast reply!

@ReimaginedWraps 9 ай бұрын

No problem! Glad i could help

@davidm6751 9 ай бұрын

What would a job like this cost assuming he took it to you originally and he didn’t have to do all that other repair work just a straight up window chrome delete not the grill?

@ReimaginedWraps 9 ай бұрын

Prices vary depending on the car, normally around $300

@danielgarcia-vx7hn 9 ай бұрын

How's it extra labor if that was your idea to go that route. That's dishonest.

@ReimaginedWraps 9 ай бұрын

Its easy to make a judgement without having all of the information.

@davidleal456 10 ай бұрын

I enjoyed watching and learning. I watch the comments to see your feedback and I appreciate you even creating sir. I have a 2013 Camaro that had red racing stripes that are now sun tanned into a pastel red and chipped liked crazy. I believe I may have to just pay someone for this. I will keep my options open until then. Thank you for remaining professional when people try and tell you how to handle your business it takes a grown man to share when hes learning.

@reggiehammond6508 10 ай бұрын

Where did you get the body kit?

@adan6488 11 ай бұрын

How much wrap did you guys use ?

@ReimaginedWraps 11 ай бұрын

I tend to buy a total of 75ft to account for any potential mistakes. Normally a 2 door car would be covered with 65ft total however

@adan6488 11 ай бұрын

@@ReimaginedWraps thank you

@ReimaginedWraps 11 ай бұрын

@@adan6488 happy to help!

@danielbonner8309 11 ай бұрын

Wow thats insane. I know theres absolute Gs like yourself when it comes to wrapping but this scares me from ever getting a wrap. Im sure they cut on the paint too. This should infuriate any professional.

@andruerodriguez817 11 ай бұрын

He should have just repainted it and kept it mystic chrome. But it does look super good too though. That color paint ^ (mystic chrome) is stupid rare.

@kennethhaywoodjr5642 Жыл бұрын

What color is this?

@ReimaginedWraps Жыл бұрын

Satin black

@moocw11 Жыл бұрын

Does this look like a dark green or more blue. Would like green to show thru more

@Ace61527 Жыл бұрын

How did you take the door handles off?

@ReimaginedWraps Жыл бұрын

You have to remove the inner door panels and pinch the white clip to disengage it on the back of each door handle.

@Ace61527 Жыл бұрын

@@ReimaginedWraps you can’t just remove it without removing the door panel. Like unscrewing the bolt and off it comes then unplug it?

@ReimaginedWraps Жыл бұрын

@@Ace61527 no, the camrys and rav 4s both have this style handle that requires door panel removal. I have not found another way around it. I believe the new prius might also have this style handle.

@ReimaginedWraps Жыл бұрын

@@Ace61527 the bolt removes the key cylinder piece under the handle but not the handle itself. Most cars only require that the bolt be loosened and the handle pops right out. The new Toyotas arent that straight forward.

@Javersonarzola Жыл бұрын

Where can I buy it

@ReimaginedWraps Жыл бұрын

Metrorestyling.com

@SLG.SOSA223 Жыл бұрын

is the transformer lookin ahh logo thing an actual logo for something?

@BucksSuperStereoWorld Жыл бұрын

I was looking this up because my radio antenna is not working at all in my E82 128i, so I bought a used antenna module on eBay for $25. I wish I could afford a carbon fiber shark fin for my car before I attempt to replace the module. I tried to reprogram the antenna when I still had the OEM stereo in my car and it just said "ERROR" when it came to antenna part. My factory BMW Professional stereo had Bluetooth to make phone calls, but if I wanted to play music from my phone I had to use an aux cable, so I bought the double din bezel and installed a 7" touchscreen, I also swapped stereos because I have a set of Sundown Audio 12" subs in my trunk and a Sundown SAI-1750D Intelligent amp.

@Skittledikk Жыл бұрын

Cringe af.

@TheJMan1K Жыл бұрын

What did y’all spray after you filled the holes? Don’t some body work on my car then wrapping after. Also what was that spoiler looks good!

@ReimaginedWraps Жыл бұрын

We finished it with a sanded spray primer after the body work and wrapped right over the primer. Im not sure on the spoiler, this was a customer’s car

@Houstondesto96 Жыл бұрын

What about the sun ?

@MarcusGilliam-z9x Жыл бұрын

Do you have a way to get in contact with you for an estimate?

@ReimaginedWraps Жыл бұрын

Unfortunately we ended up closing our doors about 6 months back. Im sorry about that, thanks for watching our video!

Ең жақсы KZbin

Пікірлер