Nice I have to build the same thing for my house and had an idea in my head I like the removable factor. I would have build it so it would take a sledgehammer to remove
@johnnyworks5446Күн бұрын
I built them for my daughters bathroom remodel but, had thoughts we may change our heating system so made them removable. 2 years later we have installed heat pumps and mini splits so I will rip them out soon! 😱🤣
@craigbray49532 күн бұрын
The 18v Milwaukee planer is crap I have one it’s rubbish Milwaukee need to get there act together and bring a fuel one out with plenty of speed and torque under load. DeWALT and Makita hammer the Milwaukee planer
@johnnyworks5446Күн бұрын
Good to know. I don’t need to use it too often so I haven’t had any issues but, thanks for the heads up.
@jacquelinecasas46864 күн бұрын
Thank you so much. I was going nuts trying to tread these things. 😅
@johnnyworks54464 күн бұрын
😆 I was also going nuts the first time I used them years ago! Thanks for watching ✊🏼
@TheRodfather19785 күн бұрын
Face shield? 🛡️
@johnnyworks54464 күн бұрын
I would recommend wearing one. 👊🏼 probably should have mentioned that. Thanks
@MellowMusicWithLantz5 күн бұрын
Thanks.
@johnnyworks54465 күн бұрын
Your welcome. Thanks for watching!
@Bre.....5 күн бұрын
Tell me you're from mass without telling me you're from mass. Thank you for the help 😊❤
@johnnyworks54465 күн бұрын
What’s that supposed to mean! 🤣 Yah, you got me!!😁thanks for checking out the video✊🏼
@paulnneke85507 күн бұрын
Thanks
@johnnyworks54466 күн бұрын
Your welcome! Thanks for watching 👊🏼
@jonothandoeser14 күн бұрын
but it's EXPENSIVE.
@johnnyworks544614 күн бұрын
Yes it is. Most tools are expensive now a days but, if it’s something you need or want I do recommend it as it works really well in my opinion.
@CarmenRivas-n9i14 күн бұрын
I'm still so confuse
@johnnyworks544614 күн бұрын
Sorry that you are still confused. You may find a better video that the explanation works better for you. I honestly watch a few similar videos on the subject I am going to film before I make it sometimes just to see other people’s explanation of it to help make it easier if I can.
@rapidrhinoplumbing-monrovi326916 күн бұрын
Great Vid Johnny, I need to be schooled on table saws. I'm a plumber in L.A.I love wood working but dont have a clue about table saws.You know your business. Keep up the good work. DD in L.A.
@johnnyworks544615 күн бұрын
Thanks a lot! Watch your fingers when using these bad boys. Once people get used to using them it’s easy to get complacent and lose some digits! Good luck!!
@syrompicturez291717 күн бұрын
Thanks. Very educational tutorial
@johnnyworks544617 күн бұрын
Thank you and thanks for watching!!
@garypic408319 күн бұрын
I have these they are great
@johnnyworks544619 күн бұрын
Yes they are! They are very reliable!
@SSO1025RETАй бұрын
You were a lifer weren’t you?
@johnnyworks5446Ай бұрын
What does that mean?
@EsausHeelАй бұрын
The blade takes a decent portion of the wood away at the line. Should we cut at the outside of the cut line rather than on the cut line? I think that you probably did, but I missed you mentioning this important point. Great video though.
@johnnyworks5446Ай бұрын
Great point! Yes, you should cut just outside the line because the blade will take about 1/8” of the wood. You can always cut twice but you can’t put the wood back after it’s cut. Old saying “measure twice, cut once”. Finish needs to be more accurate it when I used to be a framer, the guys would yell measurements to the cut guy telling them to leave or cut the line just for this reason if they needed to piece tighter or a little loose. Thanks for the question and for checking out the video ✊🏼
@kayrlisАй бұрын
Great video! And your accent reminded me of my grandpa, so it's like he was teaching me
@johnnyworks5446Ай бұрын
Thanks for watching! Glad you like the video and my dumb Massachusetts accent! 🤣
@rosevera4303Ай бұрын
Awesome work Sir!! I love it. I'm a beginner in to refurb a cable spool that my son n law brought home for me. I'm going to attempt to make it a nice outdoor planter holder for me. If you have any ideas that would help me, I would be very grateful
@johnnyworks5446Ай бұрын
Thanks for the comment! I would recommend using an exterior wood sealer on the planter if it is to stay outside. It will last longer.
@mhussainmughal74082 ай бұрын
I'm interested im carpenter my experience 15 year I need a job
@johnnyworks5446Ай бұрын
Thanks for watching and Good luck!
@scottiescott92972 ай бұрын
Great video!!! Great info. Great teacher. Love the accent. Lived in the Brookline area for a few years. 🙏🏾🙏🏾🙏🏾🙏🏾
@johnnyworks54462 ай бұрын
Thanks brother! I am outside the city 30-40mins but work in there everyday. Traffic sucks😂 thanks for checking out the vid and for the comments!!👊🏼
@JTuia192 ай бұрын
Thanks for sharing nice and basic straight to the point and well presented
@johnnyworks54462 ай бұрын
Thanks for checking out my video. I hope it helps out a little ✊🏼
@JTuia192 ай бұрын
@@johnnyworks5446 it help alot thanks heaps 👌🏾
@jriver642 ай бұрын
You made one of the best video compared to others that are out only for a click bait, but you got subscribed by me! ***** 5 stars!
@johnnyworks54462 ай бұрын
Thank you so much! When I do a review of something that is new to me, I try to be as honest as I can when giving feedback. I am glad to help out if I can.
@hddrifter1042 ай бұрын
Great video, I just ordered the WEN 5000-Watt Dual Fuel 120V/240V RV and EV-Ready Electric Start Portable Inverter Generator. I'm installing it on front of my Toy Hauler with a Stromberg Carlson AA-255 A-Frame Cargo Tray. Along with a Aluminum Diamond Plated 32"Lx22"Wx24"H waterproof Cargo Box vented with 2 -12v cooling fans. Also with the exhaust ran outside of box pointed opposite of trailer with a stainless steel muffler w/spark arrestor inside for when boondocking. FYI, with propane fittings always use the yellow tape due to it's heat-resistant & anti-flammable nature. White or Pink is for water..
@johnnyworks54462 ай бұрын
Thanks for watching! Also thanks for the heads up with the tape! ✊🏼
@Walt-c9m19 күн бұрын
@@johnnyworks5446 i may be wrong but actually it should be a flare fitting and you don’t need tape.
@aky198320012 ай бұрын
So question if connected the wattage increases. But do the amps also chnage? Are also doubiking the amps?
@johnnyworks54462 ай бұрын
Yes, I believe they do. Good luck!
@uptomyneckjewelry70702 ай бұрын
Super helpful!
@johnnyworks54462 ай бұрын
Thank you! Glad it helped out✊🏼
@CoquitoPapi013 ай бұрын
Thank you for the video! Helped me get my lumber home!
@johnnyworks54463 ай бұрын
Your welcome, glad to help🤘🏼
@bayareatrucking3 ай бұрын
The only tool I had to make the job smoothah was the beer. The rest of the tools were missing. 😂😂😂😂
@johnnyworks54463 ай бұрын
Although beer is very tasty, I don’t recommend drinking while working on your house. I do sometimes but, I don’t recommend it 😁
@bayareatrucking3 ай бұрын
@@johnnyworks5446 🤣🤣
@TJKoch913 ай бұрын
Thanks so much for this! The instructions on the box are absolutely worthless and misleading.
@johnnyworks54463 ай бұрын
Your welcome! Thanks for checking out the video ✊🏼
@rcguy30583 ай бұрын
Will it run natural gas from the house
@johnnyworks54463 ай бұрын
I know some generators can but I don’t think this one can. The manual doesn’t mention a natural gas option, only LP and gasoline.
@edwardmarquis441117 күн бұрын
@@johnnyworks5446 There are adapters to make that work.
@M3rcy003 ай бұрын
Very informative thanks a lot! Deserve more subs
@johnnyworks54463 ай бұрын
Thank you very much. I hope it helped and feel free to send a couple thousand subscribers my way ! 😁🤣
@sulaymanhaq56303 ай бұрын
Amazing video , very straight forward and no bollocks , thanks mate
@johnnyworks54463 ай бұрын
Thanks for checking it out ✊🏼
@jasonrodrigues24843 ай бұрын
😂side to side up and down
@johnnyworks54463 ай бұрын
Yup! 😆
@pauliesworld75853 ай бұрын
You make it look easy!
@johnnyworks54463 ай бұрын
Thanks Paulie! It ain’t easy looking this easy, I mean good! 😂
@legzn24233 ай бұрын
Curious what he’s doing with those mannequin heads 😂
@pauliesworld75854 ай бұрын
I will say that this thing is awesome!! And I loved the video!
@johnnyworks54464 ай бұрын
Go get one you cheap bast@rd! 😄. Thanks for watching sir!!
@stevenxpresstips36054 ай бұрын
Johnny you’re a life saver
@johnnyworks54464 ай бұрын
I am just a man who knows a couple things 🤣 good luck✊🏼
@stevenxpresstips36054 ай бұрын
@@johnnyworks5446 well it worked out for the 40 pieces of drywall I had to transfer. Sad part is I’ve been in this business for 3 years now and I was today years old when i learned the correct way to use the straps
@matthewhall96924 ай бұрын
Why even put barn door in the title of this video when this video has NOTHING to do with barn doors at all and you will just waste people's time because the ONLY reason they will end up here is looking for help with barn doors.
@johnnyworks54464 ай бұрын
The title clearly says trim out an opening for a barn door or pass through. You can either have the opening as painted drywall/plaster or trim it out in wood so it is finished before you hang your door or not. That is all this video is for. I appreciate the feedback but, I do not think it takes that long to find another video as there are thousands to pick from.
@melodymichel17454 ай бұрын
Wow! You helped me so much!Thank you for teaching those who do not have someone to explain how this stuff works. Wanting to do something and not understanding the basics is so frustrating.
@johnnyworks54464 ай бұрын
Glad to be of service! Good luck with whatever the heck your working on !!😂✊🏼
@Marvnj784 ай бұрын
Excellent tutorial, with a unique personality my friend.👏👍
@johnnyworks54464 ай бұрын
Why thank you very much! Unique is my middle name😁
@sixstringandrew4 ай бұрын
Thanks for the video it had been years since I used mine it was a great refresher
@johnnyworks54464 ай бұрын
Glad it helped brother👊🏼
@lauralee1404 ай бұрын
Super helpful hints for a beginner. Thanks!
@johnnyworks54464 ай бұрын
Glad to be of help! Good luck ✊🏼
@zombie21boy4 ай бұрын
Man i struggled with this and now you have simplified the whole process. Thanks brother.
@johnnyworks54464 ай бұрын
The simpler the better for me. Glad to help ✊🏼🤘🏼👊🏼
@trippinsoul9304 ай бұрын
The amount of headaches you just saved me!! Thank you for your services!
@johnnyworks54464 ай бұрын
Glad to hear ! Good luck 👍🏼
@chelsealee81254 ай бұрын
Smashed it , long to long 😂😂😂
@johnnyworks54464 ай бұрын
Hell yah✊🏼😀
@melt47694 ай бұрын
How many of you, like me, totally FUBARed one of these before searching for a how-to on KZbin? 😂. Thanks, Johnny, for the crystal clear instructions.
@johnnyworks54464 ай бұрын
You are welcome! The first time I used one as a teenager, I cranked it so tight thru the window and over the roof of my car I dented it! 😄
@kristinalea81775 ай бұрын
That's gorgeous! Thanks for sharing!!
@johnnyworks54464 ай бұрын
Thanks for the compliment and checking out the video. 😄
@toofypeg79315 ай бұрын
Holy shit!!! I’ve finally got it! Thanks to you and your straight forward no nonsense talking! Thanks mate from the U.K. 🍺🍺👍🏻
@johnnyworks54464 ай бұрын
Hell yah!!! Congratulations from across the pond. Glad to help ✊🏼
@cplbitterklinger5945 ай бұрын
Absolutely one of the worst reviews of any product that I have ever seen. Congratulations!
@johnnyworks54465 ай бұрын
Sooooo.. I take it you didn’t like and subscribe to my channel? Technically, it’s the best worst review you have ever seen. That would still make me # 1 at something 😁 Thanks for the encouraging feedback 👍🏼
@bryanbeast86625 ай бұрын
Excellent video! Thanks for the easy to follow info.
@johnnyworks54465 ай бұрын
Thanks you for the compliment and checking it out! Hope it helps with whatever your working on ✊🏼
@bryanbeast86625 ай бұрын
@@johnnyworks5446 It definitely helped a lot.
@John-yt5zr5 ай бұрын
I’m an idiot, and I was trying to get a 15 degree angle 7 inches long to short and this video really helped, thanks.
@johnnyworks54465 ай бұрын
You’re not an idiot, just constructively challenged is all ! 🤣 It happens to us all including myself especially if you aren’t doing it everyday. Good luck ✊🏼
@tarondabney73285 ай бұрын
Thank you for making it nice and simple.
@johnnyworks54465 ай бұрын
No problem brother. Nice and simple just like me😁 Thanks for checking it out👍🏼
@pauliesworld75856 ай бұрын
Thanks man I loved this video it helped me big time !
@johnnyworks54466 ай бұрын
Thanks Paulie! Let me know if you need any more help with hardware issues 😉✊🏼