2 жыл бұрын
2 жыл бұрын
Пікірлер
@osaiteulilo6540 5 күн бұрын
Do the xl next gen have the plugs for the front spot lights ?
@WaynePate-d5l 6 күн бұрын
Great tutorial very qualified mechanic super chilled thank you you're given me confidence in fitment cheers
@AussieDrifterTouring 4 күн бұрын
Glad it was helpful mate
@andydiep3632 6 күн бұрын
Do you have a Kakadu model compatible battery tray?
@AussieDrifterTouring 4 күн бұрын
This tray fits most Kakadu models in the same way, its just a couple models of KAkadus had a air pump mounted in the location of the battery so it just means that that has to be moved. So if your battery location is clear then this tray will fit just like the video.
@Daveyboy1066 11 күн бұрын
Have to say that BCDC unit mounting bracket, just being secured at one end don't give me much confidence it aint gona be flapping about when you hit a rough track at speed.
@Des89887 11 күн бұрын
Great video mate. What exact kit is this on your site so I can purchase it for my next Gen Ranger
@AussieDrifterTouring 4 күн бұрын
here is a link to the kit www.aussiedriftertouring.com.au/shop/ignition-anderson
@nicklaslundberg7697 12 күн бұрын
Would have been better if there was a lid or a cover to keep the sockets free from dust, debris, and moisture when you aren’t using them.
@andyd5826 14 күн бұрын
Hi mate, how would i feed the wire through when there are the anderson connections with the 8 b&s cable?
@AussieDrifterTouring 12 күн бұрын
To get through the fire wall whole on that harness just do one at a time. So the red one fully through (Anderson and piggy lead) and then the black one through.
@dj010024 16 күн бұрын
Can i use those anderson plug to charge the dual battery？
@AussieDrifterTouring 16 күн бұрын
You could plug a battery box into it with up to a 25amp dcdc charger
@dj010024 16 күн бұрын
@@AussieDrifterTouring how about a trickle charger？
@AussieDrifterTouring 16 күн бұрын
@@dj010024 yer anything upto 25amps
@chriswagner2250 26 күн бұрын
Any chance you guys are doing something similar for the Everest?
@AussieDrifterTouring 25 күн бұрын
We don't have any plans at the moment sorry mate
@jamiehill-hj1xe 27 күн бұрын
So helpful 👏👏👏👏
@ruggedreview 27 күн бұрын
Can you run two of these kits to the next gen? One for the Caravan one for the tub?
@AussieDrifterTouring 26 күн бұрын
Yer you would just need to find a second ignition controlled circuit to add the second fuse tap too.
@RyanRoeber 28 күн бұрын
Is there a part number for the 7m battery to Anderson cable?
@AussieDrifterTouring 26 күн бұрын
Here is a link to the product mate www.aussiedriftertouring.com.au/shop/andersonplugdiykit
@and7976 Ай бұрын
Where do you get that rubber floor cover? it like factory
@AussieDrifterTouring 26 күн бұрын
Sorry mate not sure the car was from a local Toyota dealer.
@and7976 25 күн бұрын
@@AussieDrifterTouring After research it comes from factory as I guessed. AU models can be bought with that spec. Pretty cool.
@robbo4687 Ай бұрын
Good video but skipped the removing of the Anderson plug when running the cable to the back
@robbo4687 Ай бұрын
Cause that was a pain until I realised lol oh and I suggest to anyone looking at doing it to do it before you get the long range fuel tank, UVP, bullbar etc. Basically any after market mods. Was not fun....
@AussieDrifterTouring Ай бұрын
@@robbo4687 Hi robbo, the long range tank might have made it difficult but we don't actually remove the Anderson to run that cable that footage is actually taken from the running of our accessory harness. well spotted that the plug was off😜. Normally we run it with the plug on though.
@df5118 Ай бұрын
I have a variable voltage alternator in my 2012 Pajero, should I ground to the main battery or to the chassis
@AussieDrifterTouring Ай бұрын
Hey mate, this video shows exactly what to do on your car kzbin.info/www/bejne/poDWaKNjftN5aNE
@df5118 Ай бұрын
@@AussieDrifterTouring Thanks, I'll move mine tomorrow to earth to the body
@robbo4687 Ай бұрын
Have extra scrivets. The heads shred easy lol and that m8 that goes behind the tank is rough as guts to put in. I'll have to put a shorter M8 in
@unounv Ай бұрын
Does this ranger have the auto start stop feature ? Redarc BCDC instructions says blue wire to D+? Is D+ the same as ignition fuse ? I have 2022 Ranger US version.
@paulsilk6514 Ай бұрын
Great to see someone doing videos on Ford Ranger. Two of your videos have help me out already great channel
@jahanzebhassan5743 Ай бұрын
Big problem with charging second battery from your Auxiliary battery in the car - wrong advice - the right way is seperate lines for every battery
@BrendanBFree Ай бұрын
What’s stopping the battery from draining straight into my lithium battery? I’m trying not to make a mistake. I want to add a dc2dc for my lithium battery to a px1 ranger.
@AussieDrifterTouring Ай бұрын
Most dcdc's units such as the REDARC bcdc will have an inbuilt isolator that will stop current going from the start battery to the lithium aux battery when the car is off.
@jdjockey Ай бұрын
Great video! Thanks for helping me identify which was a ignition fuse.
@AussieDrifterTouring Ай бұрын
Glad it was helpful mate
@bruceh1670 Ай бұрын
Update on my previous comment. Got the job done, works great. Just need to take time & find something to pull cable through tight spots. Cable ties were really tight in places so used spare wire to push end of cable tie to where I could use 1 hand to attach properly.
@AussieDrifterTouring Ай бұрын
Sounds like it was pretty tight in your setup, glad you got it sorted out.
@bruceh1670 Ай бұрын
What I hadn’t considered was how difficult it is running the cable When you have the ARB 140l fuel tank installed. There is almost no way to get your hands in place to pull cable or to tie it to the ford harness. Can’t see how cable will fit under fuel filler as there is hardly any gap at all. It’s taking me forever. Going to be a bit of a bodgey job I’m afraid. Not fault of product just me
@davereid6247 Ай бұрын
What about an option for rear seat mounted second battery?
@AussieDrifterTouring Ай бұрын
We do have this charger kit to suit that setup www.aussiedriftertouring.com.au/shop/ford-ranger-incab-kit
@davereid6247 Ай бұрын
@@AussieDrifterTouring legend thanks mate top videos too. Love to see a dual battery setup in the back seat rather than under bonnet
@gardnep Ай бұрын
Thanks for this video. You must have the smallest hands of any known body. It took me about 2 hours to get the wire through the grommet. I ended up putting a flat screwdriver through the grommet to give a space for the cable. There was not room for two hands between the brake actuator near that grommet. I did contemplate putting a hole in the grommet but persisted and it appears to work. The hole in the rear was the easiest part.
@AussieDrifterTouring Ай бұрын
Ha ha, You can probably tell in the video that as an over 6 foot guy i certainly dont have the smallest hands in the world 😜 But i have done it a few time which makes it easier. Modern engine bays are pretty tight but hopefully the video explained the steps for you.
@miguuueeel 2 ай бұрын
Where did you get your bullbar from?
@AussieDrifterTouring Ай бұрын
Sorry mate this was a customers car so im not sure.
@navnk2240 2 ай бұрын
Nice video. Thanks. Just wondering why did you choose Delkor hdt27? I am after an auxiliary battery.
@AussieDrifterTouring Ай бұрын
we have used them for years and they seam to be a long lasting and reliable battery for this use
@thecrowsblow 2 ай бұрын
Best video on this subject. Everything explained and shown. Thanks for taking the time to help.
@AussieDrifterTouring 2 ай бұрын
No worries, glad it was helpful mate
@michaelg3941 2 ай бұрын
Do you by any chance know which is the speaker wires?? I can’t find any, took off the passenger trim floor and cannot figure out which one to look for. Need left rear back wire colors so I can tap into them
@donut_ask 2 ай бұрын
This guy knows his stuff 👨🔧🚗
@AussieDrifterTouring 2 ай бұрын
@@donut_ask 😂👍
@Heinrichhattingh 2 ай бұрын
Thanks so much for this video, this is the only one out of all the 12V system installs that actually show how to run the cable to the back of your vehicle! Thanks mate, appreciate the video!
@AussieDrifterTouring 2 ай бұрын
No worries mate, glad it was helpful
@ausarias 2 ай бұрын
Thank you for the explanation.. very helpful. On your site now to purchase some items.
@AussieDrifterTouring 2 ай бұрын
@@ausarias no worries, glad it was helpful
@emu4wd 2 ай бұрын
Very well explained. Steve
@AussieDrifterTouring 2 ай бұрын
Glad it was helpful mate
@emu4wd 2 ай бұрын
@@AussieDrifterTouring so are you 100% happy with the result?
@AussieDrifterTouring 2 ай бұрын
@@emu4wd 👍
@michaelg3941 2 ай бұрын
Is there an earth wiring location or bolt in the back somewhere?
@AussieDrifterTouring 2 ай бұрын
yer there would be, you can earth to any solid bolt on the body if needed.
@marcuspearson8592 2 ай бұрын
What size cable are you using to run to the back on the accessories harness? And would you be safely be able to run a fridge and other accessories off of it?
@AussieDrifterTouring 2 ай бұрын
Hi Mate the cable size used depends on the type of harness and sockets selected. it is 6mm twin if using round sockets and 8 B&S bacle if selecting an anderson plug harness. They are all designed to run a fridge and other low current 12v circuits such as camp lights and charging usb gear.
@marcuspearson8592 2 ай бұрын
@@AussieDrifterTouring thanks mate appreciate the quick reply
@simonsadventures637 2 ай бұрын
Hi there. Is it possible to disconnect the smart alternator?
@AussieDrifterTouring 2 ай бұрын
Hi mate, you can get the dealer to turn it off. Just ask next time its in for a service.
@coryblanch1418 3 ай бұрын
Does it stop you from adding a snorkel , with the battery tray on that side near air box ?
@AussieDrifterTouring 2 ай бұрын
It shouldn’t as the battery sits in between the air box and the fire wall, probably best to check with the snorkel manufacturer as some enter the side panel close to the fire wall wich may be an issue but for companies that enter at the air box it is still fully accessible. Hope that helps
@Caira.R 3 ай бұрын
why dont you use the start,run wire behind the hood hatch leaver release just up and above that pannel just tucked behind the loom. for IGN curcuit? I can see why useing a fuse tap is easier as all the wiring is just thier, im just curiues why people are not using the wire ford provides. Nothing wrong with how it done at all looks good. just yea
@Morokigg 2 ай бұрын
I imagine it’s just easier when everything else is in the engine bay, I plan on using that wire for my dcdc which will be further back
@idiggold 3 ай бұрын
Fused?
@AussieDrifterTouring 3 ай бұрын
Yer absolutely mate. There is a main midi fuse on the battery lead to the panel and 2x inline fuses in the back of the panel. You can see all the spec here www.aussiedriftertouring.com.au/shop/accessory-panel-nextgen-ranger
@idiggold 3 ай бұрын
@@AussieDrifterTouring Excellent
@ttecsolar2846 3 ай бұрын
Best video on KZbin. Thx for detailed info.
@AussieDrifterTouring 3 ай бұрын
Glad it was helpful mate
@tedgaida156 3 ай бұрын
This is where I'm at. Wish to cut into existing wiring under the bonnet for cig lighter so it is permanently live. But powered by aux battery only. Intend to fit Anderson plug at later stage as per your next posting.
@sabisk1 3 ай бұрын
Great input. I did notice were you tapped into the fuse BOX for dc dc charger you had your finger covering the exact same spot i had to nibble a little bit of plastic out also to fit my wire thro. 😆 thought there be an better way but it was the easiest solution at the time..
@AussieDrifterTouring 3 ай бұрын
Glad the video was helpful mate. Yer that’s really the only way to do it and we show the exact procedure in our installation videos if you want to check them out.
@ozymandias7940 3 ай бұрын
Makes life difficult using the big impact drill instead of using 2 x spanners! Seems to be some kind of obsession with a lot of installers using power tools where spanner/socket would suffice and reduce the risk of damage or stripping bolts. Not always quicker, either.
@seanmac8339 3 ай бұрын
couldnt disagree with you more. i do electrical work every day and if i didnt use power tools and used spanners and hand tools for every job it would not only take a lot more time but increase the chances of getting carpel tunnel syndrome later on in life, think about it.
@ozymandias7940 3 ай бұрын
@@seanmac8339 I was referring to working on cars where a bolt could be easily stripped.
@4bnewb969 3 ай бұрын
Good video. Well explained. Would the kit be suitable for a 2019 Prado (1GD) ? Cheers
@AussieDrifterTouring 3 ай бұрын
Hi mate, glad the video was helpful, the kit is universal and will work on any car with an under bonnet fuse box so yer it will suit the Prado 👍
@kieranp2560 3 ай бұрын
This is the best, most thorough video for this install. Thank you very much mate
@AussieDrifterTouring 3 ай бұрын
No worries mate, glad it was helpful
@SuperBman333 3 ай бұрын
G'day, great video. What did you do with the original harness under the tub? Did you leave it there and seal it up ? Cheers
@AussieDrifterTouring 3 ай бұрын
Hey mate, glad you liked the video. The original harness just plug into the ford harness underneath via a genuine plug so it is just unplugged and removed.
@metelemola3869 3 ай бұрын
Hello! Could you make a video about the 12 pin trailer connector on the new ranger? Could I charge the battery of the rolling box with that connector? Thank you so much
@AussieDrifterTouring 3 ай бұрын
Hey mate not sure what you mean by a rolling box sorry
@makingvideosaboutnothing 4 ай бұрын
Great installation guide. Made the job so simple
@AussieDrifterTouring 4 ай бұрын
great to hear that it helped mate
@jferrie1 4 ай бұрын
spot on
@AussieDrifterTouring 4 ай бұрын
Glad it was helpful
@LiT0308 4 ай бұрын
Why installing 2 batteries ?
@AussieDrifterTouring 4 ай бұрын
Many reasons mate but the main reason is for camping so that you can run a camp fridge without running the main battery flat