Пікірлер
@paultheprofit Жыл бұрын
This is a long shot where do you buy the unit from I have a T1 In Australia
@hermannotto5129 Жыл бұрын
Thank you very much! You have made it very easy to replace the part with this video! Only the box directly under the steering wheel has made problems and was suddenly open and the tape came out, but just rewind and done! And Subscribed... Thanks! :) 👌
@KOTO-ROG6 Жыл бұрын
hello broh, what size of screwdriver do you need to remove the airbag screws
@KOTO-ROG6 Жыл бұрын
HolaHow much do you charge for that job bro, greetings from Mexico
@aheist 2 жыл бұрын
My 2004 has the airbag held on with Torx T-25 bolts, not 4mm hex. While the 4mm will work, you run the rusk of stripping the captive bolt heads.
@Spracker 2 жыл бұрын
Second time I've replaced my MFS, used this vid both times, thank you!
@ВладимирОльховский-с7т 2 жыл бұрын
Нудно.было.одеть.шапку.и.руковицы
@lirishahu5154 2 жыл бұрын
Thanks...
@ariuzen 2 жыл бұрын
Thanks....
@philhowell5129 3 жыл бұрын
Thank you so much, I never would have found that second screw near the ignition with out this video. Very clear instructions great job.
@frontlinemedia4270 3 жыл бұрын
Do you have a video for replacement of the ignition switch behind the tumbler?
@mirbekjunushov709 4 жыл бұрын
Thank you so much man:)
@toastersock 5 жыл бұрын
Many thanks for posting that, following your instructions the replacement was a doddle, missing indicator now functioning and missing wiper speeds back as a bonus.
@ВиталийВолошин-л9к 5 жыл бұрын
👍👍👍 🥂 🇺🇦
@allwinds3786 5 жыл бұрын
You should do one on the ventilation control replacement
@manuelortiz7731 5 жыл бұрын
Can that switch cause a short and prevent the van from starting. My hazards wont work
@breakandfix 5 жыл бұрын
Awesome made it super super easy to do this great video short and spot on
@jeffstevens4993 6 жыл бұрын
Great post thanks very healthful in replacing the switch
@time.528 6 жыл бұрын
German engineering, you gotta love it........
@kingdom5454 6 жыл бұрын
Have you or anyone on here add cruise control to a 2006 2500 sprinter? Or is it even possible
@jaywilliams4998 6 жыл бұрын
I'm sure it's possible to add cruise but I haven't done it. Sorry and good luck!
@paulydanger5354 6 жыл бұрын
Thanks man just changed one on a 99/312d you made it easy and probably saved me $300 bucks.god bless u man
@mariomaldonado4439 6 жыл бұрын
Does the multifunction switch have anything to do with the brake lights?
@drgeatman 7 жыл бұрын
nice . followed exactly and set off my SRS light
@maxzoom999 6 жыл бұрын
That happened to me too once a few years ago The SRS lights won't go away. I replaced another multi-function switch on another Sprinter. This time I disconnected the battery first. No SRS light on that one. Jay did write on this post " Be sure to disconnect your battery prior to removing airbag."
@Throttlemonkey 7 жыл бұрын
Jay, where is the steering angle sensor in there? Mine has failed and I need to replace it, I have the part. Does it go inside the clock spring assembly? The online schematics I have found are not clear, Thanks
@jaywilliams4998 7 жыл бұрын
Hi Throttlemonkey, yes, my understanding is that it is in the clock spring assembly. Be careful not to adjust or rotate in the process of swapping out. I have not replaced a new one, would consult a dealer for clarification. Thanks for watching. -jay
@xplayr9076 8 жыл бұрын
good clear instructions..
@brodnitsa 9 жыл бұрын
Отлично