2004 Mercedes Sprinter multi-function switch removal in less than 5 minutes! Be sure to disconnect your battery prior to removing airbag.
Пікірлер: 29
@toastersock4 жыл бұрын
Many thanks for posting that, following your instructions the replacement was a doddle, missing indicator now functioning and missing wiper speeds back as a bonus.
@paulydanger53546 жыл бұрын
Thanks man just changed one on a 99/312d you made it easy and probably saved me $300 bucks.god bless u man
@philhowell51293 жыл бұрын
Thank you so much, I never would have found that second screw near the ignition with out this video. Very clear instructions great job.
@Spracker2 жыл бұрын
Second time I've replaced my MFS, used this vid both times, thank you!
@hermannotto5129 Жыл бұрын
Thank you very much! You have made it very easy to replace the part with this video! Only the box directly under the steering wheel has made problems and was suddenly open and the tape came out, but just rewind and done! And Subscribed... Thanks! :) 👌
@aheist2 жыл бұрын
My 2004 has the airbag held on with Torx T-25 bolts, not 4mm hex. While the 4mm will work, you run the rusk of stripping the captive bolt heads.
@jeffstevens49936 жыл бұрын
Great post thanks very healthful in replacing the switch
@allwinds37865 жыл бұрын
You should do one on the ventilation control replacement
@breakandfix5 жыл бұрын
Awesome made it super super easy to do this great video short and spot on
@drgeatman7 жыл бұрын
nice . followed exactly and set off my SRS light
@maxzoom9996 жыл бұрын
That happened to me too once a few years ago The SRS lights won't go away. I replaced another multi-function switch on another Sprinter. This time I disconnected the battery first. No SRS light on that one. Jay did write on this post " Be sure to disconnect your battery prior to removing airbag."
@mirbekjunushov7093 жыл бұрын
Thank you so much man:)
@xplayr90767 жыл бұрын
good clear instructions..
@paultheprofit11 ай бұрын
This is a long shot where do you buy the unit from I have a T1 In Australia
@time.5286 жыл бұрын
German engineering, you gotta love it........
@KOTO-ROG6 Жыл бұрын
hello broh, what size of screwdriver do you need to remove the airbag screws
@frontlinemedia42703 жыл бұрын
Do you have a video for replacement of the ignition switch behind the tumbler?
@KOTO-ROG6 Жыл бұрын
HolaHow much do you charge for that job bro, greetings from Mexico
@lirishahu51542 жыл бұрын
Thanks...
@mariomaldonado44396 жыл бұрын
Does the multifunction switch have anything to do with the brake lights?
@manuelortiz77315 жыл бұрын
Can that switch cause a short and prevent the van from starting. My hazards wont work
@brodnitsa8 жыл бұрын
Отлично
@Throttlemonkey7 жыл бұрын
Jay, where is the steering angle sensor in there? Mine has failed and I need to replace it, I have the part. Does it go inside the clock spring assembly? The online schematics I have found are not clear, Thanks
@jaywilliams49987 жыл бұрын
Hi Throttlemonkey, yes, my understanding is that it is in the clock spring assembly. Be careful not to adjust or rotate in the process of swapping out. I have not replaced a new one, would consult a dealer for clarification. Thanks for watching. -jay
@kingdom54546 жыл бұрын
Have you or anyone on here add cruise control to a 2006 2500 sprinter? Or is it even possible
@jaywilliams49986 жыл бұрын
I'm sure it's possible to add cruise but I haven't done it. Sorry and good luck!