Hello, We are not sure we have enough information to give you the best advice. Please feel free to call our customer service at 800-383-0130 or you can email us at [email protected] where you can attach an image for us to be able to help you find replacement slides. -Woodworker’s Hardware

@@WoodworkersHardware thank you. I will

Hello, We are not sure we have enough information to give you the best advice. Please feel free to call our customer service at 800-383-0130 to discuss these brackets, and we can better help determine if they are best for your needs, or offer other options. -Woodworker’s Hardware

Hello, You can do an overlay a couple of different ways. The easiest is to use a half-cranked hinge B071T6650 shown here: www.wwhardware.com/blum-170-clip-top-hinges-b071-and-b070 Combine it with plate B175H5030.21 shown here: www.wwhardware.com/b175h5030-21 It will work fine as long as your door and frame are the same thickness. If you would like additional solutions, please give us a call at 800-383-0130. -Woodworker's Hardware

Hello, It is important for the substrate to be free of debris before the Fast Edge is applied. You will also want to ensure that you blades are sharp and free of any adhesive. Using a roller of some kind is also critical for a good bond. Lastly, you may want to let the adhesive cure overnight before attempting to trim the edges. This may also help you in trimming off only the excess banding. We’re hoping that this will be beneficial for you. If you do have further questions however, please give our wonderful customer service a call at 800-383-0130. -Woodworker's Hardware

I think I've worked it out. Internal height of cabinet minus (25mm x number of drawers = 75mm), divided by 3.

Hello, Glad to hear you found a solution, how we recommend to find it is to take the overall opening height, divide by 3 and subtract one inch from the height of each box. For example, if the overall opening height were to be 15", each box can be a maximum of 4” high. At this height, the drawer fronts can be a total of 1” higher than the box. Assume that you have this split- 1/2” higher than the top of the drawer box and ½” below the bottom of the subfront and sides. Also make allowance for reveals. If you have further questions, or would like further clarification, please feel free to give a call to our wonderful customer service team at 800-383-0130. -Woodworker's Hardware

@@WoodworkersHardware thanks for getting back to me, and so quickly! Much appreciated!

Hello, We do our best to reply to comments and questions viewers have on the products here, though we recommend that you give our knowledgeable customer service staff at Woodworker's Hardware a call at 800-383-0130 if you have questions on the product, as this will get you the fastest reply. -Woodworker's Hardware

Hello, An 18mm drawer side thickness would bump you into the 3/4" slide (example B563F), and in doing so the inside width of the drawer box would be the opening minus 49mm. Another of our videos that could help you with finding these measurements is here kzbin.info/www/bejne/rKarY6SVq6iqeJY You may also feel free to give our customer service a call at 800-383-0130, they are available Monday through Friday, 8am to 5pm central time. -Woodworker's Hardware

Hello, Movento would be an excellent option for your shelf. It is a superior slide in weight capacity as well as anti-racking system. That said, you would still want to use a lateral stabilizer (BZS7M686MU GR) in conjunction with the Movento runners on a shelf 1m wide. If you need any assistance with your order, please give us a call. Our excellent customer service staff are available Monday through Friday, 8am to 5pm central time. -Woodworker's Hardware

Hello, It is common on overlay drawers and inset drawers for there to be a decorative drawer front attached to a four-sided drawer box (this would be the dark brown one you see). In the instance where the application is for roll-out drawers (example: drawers behind doors as in the case of a pantry), just the four-sided drawer box would be appropriate (the yellow front you see). If you have further questions please feel free to call our expert customer service team at 800-383-0130, they are available Monday through Friday, 8am to 5pm central time. -Woodworker's Hardware

Hello, there is no set gap defined when using these slides. Since there is a top guide, your pullout won’t wobble. You can use whatever distance you wish if you are pretty precise in your measurement and mounting. If you have further questions about the installation process or product, please reach out to our great customer service team at 800-383-0130, Monday through Friday, 8am to 5pm central time. - Woodworker's Hardware

Hello, the location of these holes should be aligned the same for the left vs. the right. You’ll notice that the pin on the left slide is oriented vertically to allow left-right adjustment from the wheel on the right. Both holes should be done with a 6mm bit. If you have further questions pertaining to these slides, please reach out to our great customer service team at 800-383-0130, Monday through Friday, 8am to 5pm central time. - Woodworker's Hardware

Hello, the maximum opening that this device would cover is only 53-7/32. Your best bet with a drawer this wide is to go with a Movento slide, as it has a track system incorporated in the slide to help minimize racking. As for the tubing, The synchronization rod is made of a specially engineered aluminum and would not work for any other tubing. If you have further question, or are looking for further information, please call our wonderful customer service at 800-383-0130 Monday through Friday, 8am to 5pm central time. -Woodworker's Hardware

Hello, I would like to request that you give our customer service a call at 8000-383-0130, we are here Monday through Friday, 8am-5pm central time. This way we can ask a few question to help make sure we provide you with the best options on if we carry a replacement lock that would work for you, or have suggestions on where to find one or two. -Woodworker's Hardware

Hello, we believe this bundle www.wwhardware.com/xibhbfl would work well for you on this application. If you have further questions or would like further assistance, feel free to call at 800-383-0130, where we have our customer service available Monday through Friday, 8am-5pm central time. -Woodworker's Hardware

Hello, the FR777 does come in a 36" (listed as 35-7/16") which from the sounds of it is what we would recommend for you. www.wwhardware.com/fulterer-fr777-pantry-pullout-slide-white-fr777 If you have any further questions, please do not hesitate to call our wonderful customer service team at 800-383-0130. -Woodworker's Hardware

@@WoodworkersHardware hi thanks for the quick response. I appreciate the answer!