Adrian Dunevein

Пікірлер

@pragadeeshtambi5242 Ай бұрын

U deserve a like my buddy!🎉

@emikserui 2 ай бұрын

This is exactly what I needed, thank you!!

@AdrianDunevein 2 ай бұрын

You're so welcome!

@charlenebryant4968 2 ай бұрын

Excellent!! Your narration was clear and easy to understand. Thank You ❤

@AdrianDunevein 2 ай бұрын

Glad it was helpful!

@practice9539 3 ай бұрын

Thank you!

@AdrianDunevein 2 ай бұрын

You're welcome!

@BrendaHarney 3 ай бұрын

I found a pair of needle nose pliers worked well for holding the bolts to tighten the screws. I don’t have the set that you used, so a great substitute. Many thanks for your video! From Ontario Canada

@ronijoy2 4 ай бұрын

I laughed at your comment about signing off at a certain stage bc you’d probably start swearing 😆 I can totally relate Thanks for the tips

@enlightenedact 4 ай бұрын

Thank you so much! I thought I had to buy a totally new door…

@dannys2627 4 ай бұрын

If you add this text ( prime line part B713 installation) to the video tile, i guarantee you it will hit hundreds of view soon 😊

@nazerbor3i 5 ай бұрын

I wish you showed us a better angle

@eduardomelendez8784 6 ай бұрын

My roller gets stuck and can't push it into the groved ts.. any suggestions.. it gets stuck before the grove.

@AdrianDunevein 6 ай бұрын

Contact me on my website www.fixingscreens.com and send me some pics I will be glad to offer whatever help I can

@dizkoteck 6 ай бұрын

Is this universal?

@AdrianDunevein 6 ай бұрын

Many mitered screen doors use press fit corners that are 1.125" x 0.406", the roller I show here fits the corner that I sell on my website www.fixingscreens.com. I use these rollers and corners to replace broken worn out corners that look different but have the same overall dimensions. These rollers are corners fit maybe 90% of mitered style screen doors.

@jjj-yyz 6 ай бұрын

Short and to the point! Much appreciated for your efforts to share. 👊

@f1_fan485 Жыл бұрын

Awesome, many vid out there just show how to install it none how to remove it

@AdrianDunevein Жыл бұрын

Many thanks!

@paularicci3193 Жыл бұрын

Painful

@yazminaguilar2734 Жыл бұрын

What size nut and bolts we got one that didn’t have those

@joseluismacias3878 2 жыл бұрын

Muchas gracias su explicacion me ayudo mucho y pude repara mi puerta, un abraso y un saludo.

@AdrianDunevein 2 жыл бұрын

Thank You!

@nedamaurica535 2 жыл бұрын

Do you like beer? 🍺 This is song for you! And don't forget to drink a beer when are you listenig, ...GIVE ME ANOTHER BEER sounds better (i'm your new subscriber, subscribe my band Pikapolonica / Ladybug) and 🍻 Cheers 🍻 kzbin.info/www/bejne/iXPEoZebnLuffbM

@moby007 2 жыл бұрын

Thank you!! Saved me from buying a new lock by mentioning the adjustment screw (mine was hidden behind a tape)

@fixingscreens7075 2 жыл бұрын

Thats great !

@gnanegnanendran2705 3 жыл бұрын

Thanks Adrian, I have the similar set of roller and corners to be replaced. Whre can I get from, price?? Please let me know.

@AdrianDunevein 3 жыл бұрын

www.fixingscreens.com/patio-screen-door-roller.html

@MikeCompSciGeek 3 жыл бұрын

Whoa, thank you for mentioning the adjustment screw. I didn’t need replace the mortise lock, just needed to adjust the screw.

@dougsimpsonmusic 3 жыл бұрын

Thank you...Just saved me $300.00

@AdrianDunevein 3 жыл бұрын

Awesome - Happy to help !

@probstjt 3 жыл бұрын

Thank you so much for making this video. A local repair shop couldn't fix my screen door. Now i can. Thank you

@ocanaug 4 жыл бұрын

exactly what i was looking for. thank you. and yes a camera man and clean lens would help.

@DARKWARRIOR-lm8lx 5 жыл бұрын

Great explanation of all the working parts. great video

@DARKWARRIOR-lm8lx 5 жыл бұрын

looks like a well made screen door what is the brand name of this product?

@AdrianDunevein 5 жыл бұрын

Screenco is the biggest manaufacturer of these doors right now but this extrusion has been used by many manufacturers over the years

@alanwilson216 5 жыл бұрын

Do you have a video on how to remove one of these B513 roller assemblies from the frame? I have 4 of them to remove and they do not want to come out at all, all screws are removed and door frame is disassembled.

@danwilliams6947 6 жыл бұрын

Thanks for the video. May I suggest a cameraman next time so you can use both hands and show us how you got the corner out and the roller in? How can you replace just one corner?

@gargoyl3309 5 жыл бұрын

I agree plus he needs to clean his camera. I was wiping my screen thinking it was me. 😂😂

@RobertaMorris1 6 жыл бұрын

Thank you for your assistance. After watching your video, I was able to purchase the correct lock and replace the broken one on my sliding door all by myself.....YAY. Thanks again.

@danlambert9406 6 жыл бұрын

My mortise lock is inside of the handle and it is smaller then what can be found at local hardware store or big box store. What would I do now?

@AdrianDunevein 6 жыл бұрын

Hi Dan , theres an email address at the bottom of my home page at www.fixingscreens.com. Send me some pics and I will try to offer whatever help I can

@connormacleod2572 6 жыл бұрын

So you've replaced a super common roller and corner with a very uncommon one. Why would you want to do that? You even said it is very common. You can easily replace the plastic wheel with a metal ball bearing wheel without removing the mesh or corners. Sounds like 10 times more work than what was required.

@AdrianDunevein 6 жыл бұрын

You are right, in some cases you can replace a nylon roller with a steel ball bearing roller but those housings have cheap wire springs that often fall apart while you are trying to install them. Or worse fall apart shortly after you have put the door back in. Very often doors will have broken corners as well as missing or broken rollers. Better to overhaul the whole door with all new parts and have it working properly for years afterward.

@connormacleod2572 6 жыл бұрын

I've worked on hundreds of these doors with these corners. The only time I've seen them broken is when they use a plastic corner. I'll agree, the springs aren't the greatest, but much easier to replace than the whole corner. 9 times out of 10, the top rollers don't even make a difference at all.

@hannakinn 6 жыл бұрын

Is this Bruce from El Centro?

@risajajr 6 жыл бұрын

Isn't there a final step that you omitted -- attaching the plastic decorative latch cover? That is the part I am stuck on.

@aaadraftingservices3524 6 жыл бұрын

If your latch plate is different from my door kit would be glad to help, just email some pictures, the email address is on the bottom of the home page at www.fixingscreens.com

@buttdrunk 7 жыл бұрын

Thank you for this video! All directions were clear and I managed to change the lock in under 1 hour.

@AdrianDunevein 7 жыл бұрын

Thanks, glad to help !

@tellthetruth4610 7 жыл бұрын

Best screen video ever!

@AdrianDunevein 7 жыл бұрын

Thanks!

@bonniegkirk 8 жыл бұрын

Agree with Nicole's comment about slowing it down. I read extremely fast but could not keep up. Didn't even have time to hit the pause button, and had to back up. Thanks for the tips, though!

@rubber20021 10 жыл бұрын

Much too fast..deep breath, relax and explain what and how.

@fat_head_Carl 11 жыл бұрын

do you have a video where you cut a hole in the door itself for the tab and the latch?

@mnj.lutazame3105 11 жыл бұрын

what kind of software you use it?

@AdrianDunevein 11 жыл бұрын

If the corner is still in one piece, I usually hammer it out with a rubber mallet. If its broken, and a piece is stuck inside the frame, I use an awl to poke and hook onto part of the corner inside the frame then slowly lever it out. If the pice refuses to come out easily you can also drive it further into the frame to make room for a new corner. Gonna have to make a new broken MRSA corners video !

@duanedean6470 11 жыл бұрын

No more drawings? I would like to see it finished. Very informative and down to earth. Thanks.

@igorribeiroaraujo 11 жыл бұрын

thx , very helpful

@goofyfam42 12 жыл бұрын

Don't ignore this video just because the sound quality isn't that great... I struggled for over an hour after watching the high quality video on this topic..This video clip saved my from having to go buy a new screen door. Where he puts the screwdriver..in front of the wheel.. allows you to get enough leverage to open the thing up and get it over the post. It was the step I needed to get the part to go back in my screen door.

@rx3864 12 жыл бұрын

i have the same roller, how do i install them?

@nicoleemenhiser2090 12 жыл бұрын

This video had some great tips I never thought of. Thanks for the post! (I would say slow down on the speed a little bit, though. I had to do a little speed-reading haha)

@OnEbayNow 12 жыл бұрын

Just what I was looking for. Thanks!

@dojufitz 13 жыл бұрын

thanks i have an old edwardian home - it has a mortice lock - it works fine but i wish to put a push plate on the door and i can't seem to remove the handles from the door...i've unscrewed the little screw that is in the handle and remove the cover of he lock ect.....whats the trick with removing the door handle as i'm stumped!

@AdrianDunevein 13 жыл бұрын

Thats possible, but many locks can be removed through the mortised hole in the frame. Try grabbing the extended latch hook with a pair of locking pliers before you remove the screws and rotating the whole lock slowly forward to see if it will tip out through the mortise. The locking pliers will stop the lock falling and give you time to fiddle with it to get it out.

@1kzrider 13 жыл бұрын

Thanks I have to replace mine. I just do not know how to remove the lock it appears you have to remove the whole door because if I remove the two screws it only drops to bottom of door.

@sportzgallore4 13 жыл бұрын

What software did you use for this? Great video

@mamareas 14 жыл бұрын

saw your picture in the Toronto Sun! can't wait for summer, catch you on the beach!!

Ең жақсы KZbin

Пікірлер