INSTALLING SCREEN DOOR ROLLER

Sometimes people ask me about how to install the rollers in my screen door kits. They are easy to put in after you have done it a few times. Just hook the spring into the frame away from the corner. Then start rotating the whole roller assembly around 90 degrees. At one point the roller will snap onto the nubs that stick out from the corner.
To remove the roller its the opposite of those steps. Twist the roller assembly counter clockwise and it will become disconnected from the corner. Just try not to do too fast or the spring might flick out and hit you on the knuckle.
Been there done that about a hundred times!
The rollers are Prime Line part number B713 and the corners are part number B712, They are originally made by the Canadian company Fasco. The same parts may be known by several different part numbers depending who is making them.
If you need more information about my screen door kits just check out:
www.fixingscre...

[@emikserui]

This is exactly what I needed, thank you!!

[@AdrianDunevein]

You're so welcome!

[@enlightenedact]

Thank you so much! I thought I had to buy a totally new door…

[@dannys2627]

If you add this text ( prime line part B713 installation) to the video tile, i guarantee you it will hit hundreds of view soon 😊

[@jjj-yyz]

Short and to the point! Much appreciated for your efforts to share. 👊

[@practice9539]

Thank you!

[@AdrianDunevein]

You're welcome!

[@f1_fan485]

Awesome, many vid out there just show how to install it none how to remove it

[@AdrianDunevein]

Many thanks!

[@eduardomelendez8784]

My roller gets stuck and can't push it into the groved ts.. any suggestions.. it gets stuck before the grove.

[@AdrianDunevein]

Contact me on my website www.fixingscreens.com and send me some pics I will be glad to offer whatever help I can

[@dizkoteck]

Is this universal?

[@AdrianDunevein]

Many mitered screen doors use press fit corners that are 1.125" x 0.406", the roller I show here fits the corner that I sell on my website www.fixingscreens.com. I use these rollers and corners to replace broken worn out corners that look different but have the same overall dimensions. These rollers are corners fit maybe 90% of mitered style screen doors.

[@nazerbor3i]

I wish you showed us a better angle