Use Ryobi tools with hp batteries it gives the tools the most torque whats its rated at
@feelingsaucywithchefanthony7 ай бұрын
Lose the music
@Majeskty7 ай бұрын
From other video’s it was my impression in AUTO MODE that the drill will stop both in tightening and loosing the nut once it sense’s that it is to that point. Then you would finish it by hand, final nut tightening and taking the nut off. Very nice REAL WORLD demonstration. Should be getting mine today to be able to remove the anode rod in my 12 year water heater for replacement (just discovered you need to replace them every 2-5 years) Should make the job easier than with a breaker bar.
@baralad28 ай бұрын
I had that on the p261, I unclipped the battery and reinstalled it was grand after that
@alanosborne1947 Жыл бұрын
I had to laugh watching you do a tool review and wearing a mask in an auto repair shop! I'm guessing you voted for Brandon and belong to his useful idiots club. Baaaaaaaa......Baaaaaaaa....Baaaaaa 🤣🤣😂😂
@cmerun89 Жыл бұрын
Are you willing to sell the hutch itself?
@TurninandStuff Жыл бұрын
I am
@OGRH Жыл бұрын
Years ago I had axle nut drama and after a neighbor's air impact wouldn't touch it a professional mechanic from farther down the streets broke it loose pronto... so this was impressive, as mine was a Honda too. Happy I now own it!
@ricardoarancibia6583 Жыл бұрын
Grande y robusto pero no tiene gracia qué hagas la prueba con vehículos pequeños, la real es camiones y maquinaria, saludos
@pizzarace559foo6 Жыл бұрын
I didn't need one,but I wanted one..lol fuck yea🤣🤣🤣🤣
@CameronDC-Grimes2 жыл бұрын
Get the High Torque Ryobi HP, it has double the Torque of the P262. The P262 is very good but it's a mid torque impact gun meant for lug nuts and some suspension parts. But for High Torque parts above 500 Ft-Lbs will rust in above 600 ft-lbs. If you work on semis they have 400-500 Ft-Lb lugs. Use the HP batteries, they are Grey and meant for these impact wrenches to perform correctly! The black batteries don't have top contacts that help the battery communicate with the impact to send more power during stress.
@CameronDC-Grimes2 жыл бұрын
Oh that's just the P262 model which is rated by TTI at 600FtLbs Breakaway/Nut-Busting Torque & 450 Ft-Lbs of fastening torque! Use the p195 One+ HP 18v 3Ah battery with it for more initial power! The P195 3Ah has 21700 cells and not the 18650's the 4Ah, 6Ah & 9Ah HP batteries use. Many people don't realize the Ryobi is made by the same manufacturer that makes Milwaukee tools/Impacts "TTI" its half the cost of those 1/2"drive M18 Fuel Impact Wrench's! I'm getting the new High Torque Impact Wrench by Ryobi called the: PBLIW01B It's the Ryobi One + HP 18v Brushless 1/2" Drive Impact Wrench which has 1170 Ft-Lbs of Nut Busting glory and 700 Ft-Lbs of tightening fasteners! You can do the Labor Day sale or Ryobi Days Sales to get them for $200 with 4Ah HP battery. I buy the 30min InteliCharge + 4Ah HP bundle. Or the 2x 4Ah 18V HP battery pack with standard 18V mini charger bundle for $129 as of yesterday. Otherwise one 4Ah HP 18v costs $105 alone or $169 with the 2x 4Ah 18V HP battery bundle. I'm buying the High Torque Impact by Ryobi and the 2 battery + charger bundle because I'm getting the Ryobi Air Inflator for $35 and it has a digital pressure reader. My Jeeps tires are 26psi when they should be 30-33 according to Door Chart.
@86Miguelisimo2 жыл бұрын
You sound like a kid on Christmas morning playing with your new toy! Congrats
@TheRealPatrickStarOfficial2 жыл бұрын
Hows it compare to Milwaukees Fuel 1/2Inch?
@glenndavis27622 жыл бұрын
swivel head / floppy head = flex head instant handles = instinct handles filers = files butane torch = propane torch forks = pickle fork misc picks = chisels and punches Just kidding ya, good video and nice toolset - thanks
@wacalla262 жыл бұрын
You gotta use the HPbattery !!!
@omary54392 жыл бұрын
I just bought the PBLIW01B high torque! 1000 lb ft of breakaway torque
@isauabnerdeleonlopez90792 жыл бұрын
Good lock
@gavin58612 жыл бұрын
That child like joy when he broke off the axle nut is exactly how I felt using it to break the lugs off on my 30 year old land cruiser. Haven't met a bolt yet that can stop this machine!
@AJ_Halvajian2 жыл бұрын
Bro; Picked up that PBLIW01B today (the 1,170 break away ft-lbs.)- You must be hot!! j/k, but i prob wld be; Real-ish.. Finally, Ryobi tho, this thing is SERIOUS
@Alfred_jodokus2 жыл бұрын
Den Drehmomentschlüssel hättest du dir sparen können. Die Bolzen waren schon zu fest angezogen, er hat sofort ausgelöst.
@Paul_Dalangpan2 жыл бұрын
Thanks so much for doing this video 8 months ago. Can you please comment on the P262's durability and reliability so far? Appreciate this. Thank you.
@99SVTBolt2 жыл бұрын
I’ve been using mine in the shop for almost a year. So far so good. 👍🏼
@irocss85 Жыл бұрын
Yes please same question?
@moeharoun16463 жыл бұрын
Try the 6Ah battery and see the big difference
@Liquid_Mike3 жыл бұрын
If you use an HP battery (there are 2 extra terminals near the back of the battery post) you can supposedly get *even more* torque out of that thing. I've got a lot of Ryobi tools but that impact is absolutely the best they make
@mtanyctrainatlantamartatra71643 жыл бұрын
At 6:19 your boss is watching 😂😂😂😂
@h99483 жыл бұрын
10:20 time stamp you said it was a brushless motor this is a brushed unit. You should have spent the extra $59 for the new hp brushless one bro
@TurninandStuff3 жыл бұрын
Corrected my self in the next video. I did spend the extra, lol.
@miguelarreguin643 жыл бұрын
I didn’t need one too but I still got it 😂
@boryskafarow3 жыл бұрын
good job
@icyrene13 жыл бұрын
nice review , got the job done.. hows the vibration vs p261.
@jalee65873 жыл бұрын
Battery cannot supply enough amps at half life. So there voltage drops too low and triggers the lithium low voltage shut off. You need the HP battery to work properly.
@jalee65873 жыл бұрын
Need to get the hp battery for full power make it at least a 4ah also.
@jalee65873 жыл бұрын
With an impact you should be wearing some eye protection . Especially at work.
@TurninandStuff3 жыл бұрын
You didn't see my safety squint?
@SW08313 жыл бұрын
Try a HP battery for example 6Ah HP battery will give you even more power then the 4Ah normal one.
@Joe_Blo3 жыл бұрын
2 months later, any problems with daily use?
@TurninandStuff3 жыл бұрын
None! Just really needs the HP battery.
@Joe_Blo3 жыл бұрын
@@TurninandStuff Thanks. I just bought one on eBay. It's new in box, but no warranty, so good to know it's a decent tool. The P195 battery is not currently available at HD or eBay for whatever reason, so I'll just use my P191 3AH.
@vicirish743 жыл бұрын
Where did you get the digital Torque wrench you were using?
@TurninandStuff3 жыл бұрын
My snap- on rep. shop.snapon.com/product/TechAngle-Models-(2%25-Accuracy)/1-2%22-Drive-TechAngle-Electronic-Torque-Wrench-(15-300-ft-lb)/ATECH3FR300B
@jeremytam82193 жыл бұрын
Power is inconsistent on my 262. Tried torquing wheels to 90 ftlbs and it can't take it off sometimes. If you walk away and try again, it might take it off. Waiting for HP batteries to go on sale
@HahnGamingYT3 жыл бұрын
Packers suck! Nice box tho
@BADD1ONE3 жыл бұрын
I have the second model. It works great. But I want this one
@pnweezy3 жыл бұрын
Nice that it break off the crank bolt on the Honda
@senivan223 жыл бұрын
Try using the 195 HP ryobi battery. Its more powerful using the HP battery.
@behunin19633 жыл бұрын
For a budget mechanic this is a great value. Great video thx for sharing.
@Antonio972943 жыл бұрын
Nm?
@TurninandStuff3 жыл бұрын
?
@Antonio972943 жыл бұрын
@@TurninandStuff how much NM
@TurninandStuff3 жыл бұрын
@@Antonio97294 I believe it's still $159usd. Links in the description.
@gregmisiolek68333 жыл бұрын
Max in reverse is 600 lbs/ft (813Nm) of breakaway torque and 450 lbs/ft (610 Nm) of fastening torque.
@TurninandStuff3 жыл бұрын
@@gregmisiolek6833 thanks for that. I totally misunderstood the contexts.
@jedidias70913 жыл бұрын
Mine did the same thing. Also it does take off my lug nuts at 110 ft trq ...but would not remove my shocks or sway bar links which aren't torqued at 110. And I also got the intermittent stoppage . Think it will go back for upgraded modle. Bc my impact driver can do better damn near.
@Jedi0543 жыл бұрын
The sheer joy from how easily it took out that axle nut made this video totally worthwhile. Specs on that torque wrench?
@TurninandStuff3 жыл бұрын
Snap-on half inch tech angle. Torque from 15 to 300 ft-lb. Digital read out, LEDs, vibrates. All that jazz.
@Dreadwin693 жыл бұрын
This thing is not even running at full power until you get A HP batteryYou can tell because there will be an extra set of terminals on the back of the battery that plugin to extra set of terminals on the tool.
@TurninandStuff3 жыл бұрын
Adding it to the list!
@ninetwof13 жыл бұрын
I agree I just purchased one and had to go back and get that HP battery it makes a big difference.
@CameronDC-Grimes2 жыл бұрын
Yes get the Ryobi 3Ah HP 18V 195's, if they say TTI that's OEM. TTI makes both Milwaukee and Ryobi. The 3Ah HP has 21700 cells instead of 18650's that are in all the other 4,5,6,9Ah HP's. Way cheaper and have way more short term initial Ft-Lb power. The 9Ah outperformed the 3Ah HP but cost like 3x around $195 each. When you can pick up genuine Ryobi 3Ah HP's on Amazon under $50 The High Performance batteries have Grey on them and two metal contacts on the top back of the post that's inserted in the Impact. Don't use Black Ryobi batteries because they have ½ the power
@rashewhite3 жыл бұрын
You honestly need the hp batteries for the impact
@datownkidd3 жыл бұрын
This is the older non HP modem impact also. On the box it says p261k but the new impact is p262
@Avalanche23 жыл бұрын
Ive heard some bad thing about this, lots of problems with the trigger - are you seeing any of that?
@TurninandStuff3 жыл бұрын
Not at all. As a matter of fact, I had the trigger issue with the 261. Also one of the reasons for the upgrade.
@TOLDyouSOagain3 жыл бұрын
I have the p262 and have not seen any issues, I got mine 3 months ago
@99SVTBolt2 жыл бұрын
I’ve had mine for almost a year. No problems. 👍🏼
@Avalanche23 жыл бұрын
It's 100 with the battery? Not bad.
@dgunearthed78593 жыл бұрын
battery, charger, wrench, and carry bag, just like the Autojare except that that comes with the sockets, too. Supposedly, the Ryobi is much better though! ;-)
@jimhenry39923 жыл бұрын
That's stinks that you had to take it back. Just awaste of time to find out it's the same. Reminds me time is most valuable.
@jvah38473 жыл бұрын
I took mines to the junkyard it took off 32mm axle nut and 19mm honda crank bolt with ease
@js_youtube702 жыл бұрын
That's what I like to hear😊 I just bought this in anticipation of doing a timing belt replacement on my Honda