Thank you very much for your video! Very helpful! How much for everything that you used in this videos including all speakers, the mixer and xlr's?

Hello, I have a Mackie ProFX 12v2, 1- Bose Sub1 and 2-Bose S1 pros which I inherited. Please give the proper way to connect my system. Would like to connect my IPhone for music, 1 Shure wireless mic and how to separate my Bose Sub1 with its own control. Thanks in advance!

What is the difference between 4444abnd 9999?😊

It seems to only have delay effects, but no real reverb...

Do these speakers really shut off if played loudly after some time?

Tell me about the sub

If I want to run them as parrelel monitors would I use the mix out port to run to the second speaker?

Hi, can i use a different DAW like audacity or bandlab?

What about for acoustic guitar only? Someone told me the jbls have a mid scoop.

Just DJ'd an event for the first time with a pair of the 15" ICOA by LD. 1st Impressions: Warm sounding, plenty of low end, amazing signal at medium levels, do not push these at high levels during dance - the compressor /limiter will kick in and automatically reduce the signal to half level volume. Does anyone know what I'm talking about? During the dance set the bride, aka client, asked me to turn it up when I was already pushing them at max. I'm very skeptical at the 128 db volume rating. We can do product reviews all day but unless the DJ is doing the review after a live set, I think the review is at best marginal. I do not recommend DJ'ing a set with these unless paired with the 18" ICOA sub. With out the sub I think these have to work to hard to rock a party. Just my 2 cents after 15 years in the game.

With altos top speakers, i have noticed if you use both inputs with a Y cable, it seems to give you more of a loudness. Can you do a video trying this out? Not sure if its just me or its a fact that you get more out of the speaker or not. I usually use one sub connected to left and right alto tops and use a Y xlr to use both inputs on the tops.

Any ideas how to resolve a broken antenna. A/B-Ant. My cat must of gotten a hold of it. It's been in my house for three hours and already have a broken antenna. Jesus.

A brilliant video. I love watching your videos. You are very informative easy to understand and can speak English.😂 Thank you so much for this review on these EV evolves speakers . You’ve encouraged me to go out and buy a pair.. thank you I❤️☘️

If we would compare this speaker to Partybox Ultimate, which one has more bass?

I have purchased alto ultimate few months back. And run cable to right side. Now I purchased the alto total to eliminate xlr cable.but I can’t seem to get them to link. I think I purchased the wrong one lol

Hello, which mixer has the best reverb, this mackie or the soundcraft notepad series? Thanks

I just bought a new laptop my old laptop worked good the problem im having is I do online bass lessons and with my old laptop I was able to send a bass signal thru my Mackie profx12v3 mixer and still be able to use my laptop mic to talk with my new Acer nitro V 15 if I use my mixer my laptop mic does not work

Can someone explain what exactly a D.I is for? Cos i just plug my guitar in n works fine

Hey Robin I have a question...I am using the sub out to a subwoofer and a have a couple channels isolated using 1+2 (bass and kick drum) Do You recommend using the low cut button to minimize feedback and maximize volume at that low of a frequency. ..

Sir, I have a question. If I have the same setup (2xTS415 and 1xTS18s) can I use bluetooth input for sound into the TS415 linked together, and then connect each output of the TS415 into R and L of the sub. In other words is the bluetooth signal transmitted to the output. and if it is, is their any benefit in doing this?

1250 RMS...nah i guess 400 RMS. 1250 will be the program

I’ve had the 12 inch alto sub for a year and I love it. I’m thinking about buying another one.

the 12 is very authentic

Mine is not louder then my ATV, I was disappointed when it only played out the smaller speakers I was hoping it really played through the bigger ones and just blast my music

Alto, JBL, Behr, EV

I’ve just brought this mixer and I’m having trouble getting effects into my wireless in ear monitor , I’m a soloist using backing tracks so am I best using aux 1 & 2 or would the headphone option be better, thanks

How do these compare to Yorkville yxl15p?

1000W PMPO, not RMS

Deciding between 12 and 15.. curious of a difference in clarity for vocals and acoustic instruments. Also wondering if either might double as a decent frfr amp cab. Thanks for another great video!

I like this lights but i dont have them and i want to buy. I have 4 fos iridium beam 75 and 2 beamz panther 25 and im great and i use them with dmx but i want some wash

Alto TS415 or LD systems ICOA 15?

How would you wire one speaker to a dj controller, would you put the left and right in that one speaker or just on jack? Thanks for video

Just curious which one is better alto ts 415 or qsc k10.2 always watch you videos

Hi, can you do a video showing how the ev zlx12 sound with a keynoard pls. Tks for your help and regards.

ts18s or behringer B1800XP???

ts18s or behringer B1800XP???

Here in 2024. Can I use it to connect 2 m32 mixers wirelessly ?

Do these have any sort of feedback cancellation? Would love to see a bit of reverb and other performer-friendly features in the dsp. Otherwise, amazing features for the price.

Thanks so much❤

That s not a review, it's just an unboxing video.

I would have did sub 1st then out to speakers

I don't mean to be critical. But harbinger is a wonderful product. I have a couple of the 3,000 series 12-in two ways and I think they're just fine. In fact I think they're great for the money. But you guys are treating them like like they are a low end product from Amazon. I wont to give you a resume on why I'm qualified to talk about this stuff but if you'll just hear me out it'll make sense. First of all, 2400 watts. That tells me you're jerking my chain and I can't believe anything you say about this product. The only people that are going to believe these are 2400 w are millennials living with their mommy's basement. This stuff is wonderfully priced and quality enough for a professional and you shouldn't be afraid to target that demographic. More importantly, you're missing the premium opportunity to get people into your store. The guy in the video does a nice job and everything but he needs to say it loud and clear that he's not going to turn these things up so you can hear them. He needs a powerfully reiterate that there's no possible way you could hear what the sound like through your phone or computer even if it's got a subwoofer on it. YOU NEED TO COME INTO GUITAR CENTER FOR DEMONSTRATION. That's like trying to demo an ultra high definition flat panel over-the-air to somebody with a cathode ray TV. It just doesn't translate. Tell him I need to come into the store and hear them. Tell them it'll rattle their pant legs but get them in the store. Oh... Never mind... The guy in the store doesn't even know the product. For crying out loud does anybody at guitar Center work for a living? I bought my harbinger 3000 series in Portland. They didn't bother having these speakers set up so I can hear them. The guy showed me know need use or value. He didn't even ask me if I wanted to buy. I guess he was probably a lead guitar player in a classic blues band and this was all beneath him. (Those guys are the biggest narcissists in the music business) So Portland guitar Center needs to fire their manager and get somebody in there who will hire people who will learn the product and are teachable as to how to sell something that will actually benefit the buyer. If somebody in that store would have known anything about sequencers I would have dropped a chunk of change. I spent years doing radio and television commercials music beds for live performance. My sampler sequencers or early nineties vintage and pretty much worn out. I had two simple questions. Does it make a different song Banks and will it save instrument Banks. Nobody knew what I was talking about. So I went over into the electric guitar department and plugged a Strat into a marshall stack and turn it to 11 and played stairway to heaven.

4:43 5:44 6:45 7:46

My Amp only has a left and right....not left front, left rear, right front, right rear. Can I wire all the lefts together and the rights together? Also, is the RCA output for the Amp? Can I use the other wires into my Amp rather than the RCA?

How can I us this mixer with Audacity !

hy there! for what i undestand, if my woofer uses balanced audio connections, i can use the AUX send TRS to XLR or is better to use a mono (TS) to XLR? from the first woofer i'll link another 4 (active) woofers. Thank tou. Signal coming from the Dj Controller is unbalanced (hercules Inpulse 500) so the entire lignal in the system is unbalanced

80% of my gigs I use 12" tops and subs. I will take 15's for gigs that I am not using a sub. For example I just did a store opening. No dancers or anything at that event. I will on a few occasions take the 15 inch tops with subs if I think that things are going to be crazy loud like a huge hall or outdoors....

sir can i play bass guitar direct in active speaker, without mixer ??? if yes den, without Mixer its good or bad ???

Can I get it

My sub only has one input/output (EV ELX 18). If my mains left and right are stereo, do I lose any low frequencies meant for the opposite channel? Or are the low frequencies in mono so both L and R get the same sound?