That reduces the radio frequency from the laptop. Wifi is radio frequency. But this Wrap Top reduces a different electronic field --- the magnetic field emitting from the computer . The different fields we work to reduce are radio frequenices, dirty electricity, magnetic fields, and electric fields.

I never have wifi on, we plug into ethernet but the laptop still has high levels of Gauss/magnetic fields emitting. They say it is 'reducing magnetic field'. I use a shielded blanket under mine the odd time I actually use it on my lap.

The video shows the ambient background levels with the phone in airplane mode. We did not show background levels with the phone off or with the phone not present. You will see that the levels when shielding the phone were very similar to the ambient background with the phone in airplane mode. This video was recorded inside a shielded enclosure made with a single layer of our Nickel Copper Ripstop fabric. This allowed us to get these lower readings as it is increasingly difficult to find areas with low ambient levels. We just took a measurement without the phone present and were getting similar readings.

Correct. This pouch is meant to keep the phone from getting or receiving signals. This also offers protection against hackers and tracking.

If it’s not properly grounded. Get the outlet tester to make sure. Also make sure the meter is set to 2v DC

No.

@Lookat mySnikt it's a joke! The video is heavily colour saturated so his hands are orange!

You can find all this and more at www.lessemf.com. Although they are closing right now, they are very helpful when you call them!

@@seandavidson6590 thank you so much and God bless you

This material is used for RF shielding and grounding. It will not shield magnetic fields

@@LessEMF thank you so much for answering!!

Due to the high amount of Silver in the Dream Canopy, we do not recommend washing it in a machine. We recommend hand washing in distilled water to prevent the Silver from tarnishing. Here is a link for more specific guidelines on how to wash silver based materials: lessemf.com/personal.html#washing

Millivolts per meter, and no milli just means 10^-3

@@ChamGee what brings you here? You seem quite knowledge able and I’m just curious what you were searching for/doing in relation to all this?

Yes and no. When making a choke for a design frequency, less wraps can be more effective. This is based on the mix of the ferrite as well. So in other words, you could have, say, five turns which is more effective on the frequency above what you are operating on. By reducing it to three turns, this could actually increase the choking impedance by a lot at the desired frequency. So less can be more.

Install a dozen or more on a wire and you got yourself Ferrite Anal Beads stay safe out there and have fun

dBm is never expressed with /m2 11 mV/m = 0.011 V/m = ~0.2 µW/m² 6 V/m = ~100.000 µW/m² Reduction = 99.999+ %

That's just what his voice sounds like.... This video is providing an excellent guide to shielding wires for magnetic field EMF.

Not synthesized, just a cheap microphone from the late 90's....