Very useful video. I have a 1985 Mk 2 scirocco GTX and it leaks into the drivers footwell. I've been offered some new golf mk2 sunroof drain pipes but I don't know if they are the same as a scirocco. Would you know if they fit? Cheers.
@dreadnoughtcustoms6 ай бұрын
Glad you found the video helpful. The drain pipe is just a piece of tubing so could be the same, however you’ll need to remove the roof lining to replace it so you’d need to be very sure there’s an issue with it first as that’s a big job. I’d say it’s unlikely the hose needs to be replaced, at worst it’s come disconnected from sunroof tray.
@stephenrowlands8436 ай бұрын
Thanks, much appreciated. @@dreadnoughtcustoms
@cloud_0_6 ай бұрын
I'm getting a 1988 Scala 'barn find' for free which should be a fun project. Dry stored in a garage for the past 20 years so hopefully in decent condition (haven't been able to fully inspect yet) - will probably get shot if it starts getting too pricey but can't complain for an upfront of £0. Very helpful video, will definitely be using it when I do my full inspection.
@richardlawrence22187 ай бұрын
Thanks Tom, Really useful. Putting my 87 Rocco GT Auto back on the road after its been sleeping for 32 years - yes, it leaked when I've washed it so I will g through your recommendations.
@dreadnoughtcustoms7 ай бұрын
Sleeping for 32 years! Hope you get her all sorted and out on the road again
@richardlawrence22187 ай бұрын
Documented 24000 miles from new! She is running now and will be on the road this year. Some of your parts now fitted also.
@dreadnoughtcustoms7 ай бұрын
@@richardlawrence2218 excellent, hopefully I see it about
@mastermoi8 ай бұрын
What is that front light/grill setup?
@dreadnoughtcustoms8 ай бұрын
It’s a single lamp mk2 golf de badged grill which has been cut to length
@mastermoi8 ай бұрын
@@dreadnoughtcustoms looks nice! So you have no high beam with that setup or euro doesnt have seal beam and you can just switch the bulb itself for one with both high and low beam? Will the mk2 grill be too short for a us light setup?
@dreadnoughtcustoms8 ай бұрын
@@mastermoi I’m not sure on the US setup, but uk the main and full beam is on outer lights so makes no difference
@rally_yellow8 ай бұрын
Thanks for a very useful video. In the bit about where to look for rust at 8:14 you say that rust around the rear beam mounts is the worst place for rust, can rust in that area be repaired (albeit with time and expertise) or is it actually not possible to safely sort it if it’s gone too far?
@dreadnoughtcustoms8 ай бұрын
Hi, it’s definitely fixeable, repair panels are available as they are the same as mk1 golf, but it’s probably not a cheap repair depending on how much you can do yourself
@rally_yellow8 ай бұрын
Thanks for the quick reply! Do you have a link for the repair panels you’re referring to please? And do you plan to get more fuel filler pipes in stock?
@dreadnoughtcustoms8 ай бұрын
@@rally_yellow yes I’ll hopefully be getting more filler necks at some point soon. Here’s a link- www.classic-vw.co.uk/mk1-golf-rear-beam-mount-repair-section-left-side-171801391-15179-p.asp
@rally_yellow8 ай бұрын
Thank you 👍🏻
@hujiproductions84579 ай бұрын
Heard so many reports of people giving up with GoPro as they have lost footage. Just got the new DJI camera and am impressed so far. Hoping to do lots of walking around car shows with it in the new year. They do the pocket with the built in gimble or an action which is more like the GoPro range I believe.
@dreadnoughtcustoms9 ай бұрын
Thanks for the heads up, ill give the Dji a look.
@hujiproductions84579 ай бұрын
@@dreadnoughtcustoms Loads of reviews on KZbin!
@rudolfhess315310 ай бұрын
Love the video, but god the intro sound is pure ear rape
@dansouth900911 ай бұрын
Nice chat bro, can't wait to find out about the front grill
@dreadnoughtcustoms11 ай бұрын
Hopefully get it sorted next week
@charliegoodaire46811 ай бұрын
You are the man!
@dreadnoughtcustoms11 ай бұрын
I wouldn’t go that far!
@avfcfan211 ай бұрын
Will have the lights off the rear end if you end up scrapping it
@dreadnoughtcustoms11 ай бұрын
Unfortunately they are bonded on so can’t get them off easily
@universalexports773711 ай бұрын
Yeah - good stuff thanks for this vid.
@andrewmackay1522 Жыл бұрын
very useful, thank you. My scirocco boot is leaking from all weak points so I am addressing them one by one
@dreadnoughtcustoms Жыл бұрын
Glad you’ve found it useful
@JackVincent11 ай бұрын
How have you sealed the rear lights?
@andrewmackay152211 ай бұрын
@@JackVincent I haven't yet solved that! Tried various butyl sealant tapes which have not worked. I have the original seals so may use Dowsil 785 Sanitary Sealant or similar to bond the seal to the lights, then use it to seal to the body. I haven't been able to find replacement seals
@davidheaton5765 Жыл бұрын
Hi mate, messaged you over on the register to see if you had a rear panel cut available? My rear valance had to be cut out due to rust, so hoping you might be able to help!
@dreadnoughtcustoms Жыл бұрын
Hi Dave, pretty sure i replied during the week. register forum has been iffy for me lately. ive got an early rear end with a valance but they are different to the kitted ones. if you could send me a picture of the bit you need ill see what i have.
@davidheaton5765 Жыл бұрын
@@dreadnoughtcustoms you're a star mate, thank you. Will send you a message.
@ericroccofan9410 Жыл бұрын
Love the video, Tom 👍
@dreadnoughtcustoms Жыл бұрын
Cheers Eric
@e5095 Жыл бұрын
Hey Thomas - how's the hack holding up so far?
@dreadnoughtcustoms Жыл бұрын
So far seems ok. I’ll let everyone know and get pics in my next update video
@jezkendall1893 Жыл бұрын
Nice update, My mates got a B2 - He may be interested in parts you don't want
@dreadnoughtcustoms Жыл бұрын
Yeah send him my way, there’s a fair few bits I won’t be needing
@haastnation9922 Жыл бұрын
Any chance you're going to reproduce the small Euro pumpers they're impossible to get in the States now.
@dreadnoughtcustoms Жыл бұрын
I’ve been thinking about it. Might be something for the future
@RPS34V Жыл бұрын
it was beautifull untill ...... yeah i hope that tic tac crap comes off
@dreadnoughtcustoms Жыл бұрын
Nope it’s staying
@RPS34V Жыл бұрын
@@dreadnoughtcustoms aww man
@RPS34V Жыл бұрын
@@dreadnoughtcustoms hows other folks reactions to that ?
@dreadnoughtcustoms Жыл бұрын
@@RPS34V loads of black roccos about. Only one tic tac
@dreadnoughtcustoms Жыл бұрын
@@RPS34V mainly positive, few people don’t like it.
@cedricwong7276 Жыл бұрын
Hi Thomas! I love the car. Could you tell me your Wheel/Tire specs? Cheers!
@basilenw2445 Жыл бұрын
Hi 😄👋 I love your videos you explain litteraly everything ppl need to check before buying. 👍 Just a quick question : Do you have any adress or retailer name for some High Beams ? I have a 1989 GT II and I'm searching everywhere to find one of these Hella high beams but seems like it has disappeared...
@dreadnoughtcustoms Жыл бұрын
Thanks buddy 👍🏻 the inner light high beams?
@basilenw2445 Жыл бұрын
@@dreadnoughtcustoms Yes exactly.👍
@dreadnoughtcustoms Жыл бұрын
@@basilenw2445 get in touch with Joost, he should have done although I think he’s away at the moment so don’t expect an immediate reply. scirocco-delen-eimers.nl/
@basilenw2445 Жыл бұрын
@@dreadnoughtcustoms Thanks a lot 😉👍. I'll get in touch with them as soon as possible.
@alexanderiskander9621 Жыл бұрын
Hi, I would like to make a suggestion, the wing mirrors on a MK2 Scirocco have an underlay trim which mates between the outside of the door and wing mirrors, I am pretty sure most on the Scirocco's are cracked or half on, have you thought about making some? I think there would be an interest from MK2 Scirocco owners. Many thanks great video.
@dreadnoughtcustoms Жыл бұрын
HI Alexander. yes ive actually been working on some forged carbon mirror base plates. im going to see if i can also make them from resin.
@ArturoGarcia-sy5lc2 жыл бұрын
Muy bonito tu scirocco. Cuídalo yo también tuve uno. Saludos desde veracruz mexico.
@dreadnoughtcustoms2 жыл бұрын
Greetings. there are a lot of nice Scirocco's in Mexico
@VintageVaughnVehiclces2 жыл бұрын
Get a staorage building for all the sciroccos should all be saved.. The day may come they can be converted to hydrogen electric or something that hasn't been invented yet the scirocco body is classic
@robbakker46812 жыл бұрын
I hope you restore the Tropic.. I also have a Tropic.
@dreadnoughtcustoms2 жыл бұрын
Yes it will be restored.
@robbakker46812 жыл бұрын
Thank you for the English plates with Dutch number for my Scirocco tropic
@dreadnoughtcustoms2 жыл бұрын
@@robbakker4681 not a problem.
@davidheaton57652 жыл бұрын
Great stuff! By the way mate, on the turbo outside, is that front bumper off a japanese model? I love that JDM square numberplate.
@davidheaton57652 жыл бұрын
@@dreadnoughtcustoms I'm guessing they're difficult to track down then!?
@juddfyah2 жыл бұрын
Hey are the taillights on the one that’s chopped up?
@dreadnoughtcustoms2 жыл бұрын
No tail lights are good but unfortunately previous owner sealed them in, I’ve tried getting them off but no luck. They’ll probably get damaged if I do manage to shift them.
@hansdk0072 жыл бұрын
As a Dane it kinda hurts watching you chopping Sciroccos, here it's difficult to get a mk2 especially a nice one. I know right hand drives ain't is attractive as left ones. Still love your vids even though i personally would rather own a full oem one :)
@dreadnoughtcustoms2 жыл бұрын
Yes I really didn’t want to chop them up but I didn’t have any luck selling and needed the space. They will keep some others on the road though.
@andygraham23252 жыл бұрын
Following your builds and channel Thomas,awaiting the video on the custom rear lights.
@dreadnoughtcustoms2 жыл бұрын
I’ve half recorded it but it was a bit pants so need to do it again
@andygraham23252 жыл бұрын
@@dreadnoughtcustoms also with the Audi,try the classic page for advice if needed and maybe spares,just some help buddy i thought i'd share.
@dreadnoughtcustoms2 жыл бұрын
@@andygraham2325 thanks mate. I’ve joined a number of classic audi pages and have checked out the Audi classic website. Few small parts available but seems the majority are not.
@andygraham23252 жыл бұрын
@@dreadnoughtcustoms if you struggle for parts,the classic Audi group has a few members who may know of parts available.
@russellrobson76322 жыл бұрын
Sorry Tom, love your work but is this Dreadnaught Customs or Dreadnaught Scrappers?
@dreadnoughtcustoms2 жыл бұрын
I’ve tried to move the cars I’ve chopped to good homes but no one was interested. Parts will keep others on the road. I also had to make room quick for the Audi.
@aneurinprice61352 жыл бұрын
I've got the 1.6 in my GT that I'll be bringing to national again this year. The 1.6 engine is weedy D:
@dreadnoughtcustoms2 жыл бұрын
I’ve never driven a 1.6 rocco. I’ve heard they can be fun.
@aneurinprice61352 жыл бұрын
@@dreadnoughtcustoms They certainly can be, but not quite as much fun as a 1.8. You can have a go at the nationals if you like
@dreadnoughtcustoms2 жыл бұрын
@@aneurinprice6135 maybe, we shall see
@torswift59902 жыл бұрын
Try driving the 1.5, even more weedy :(
@jezkendall18932 жыл бұрын
Car looks amazing, well done on the award.
@dreadnoughtcustoms2 жыл бұрын
Cheers Jez
@andygraham23252 жыл бұрын
Great result Thomas,rocco looks well.
@dreadnoughtcustoms2 жыл бұрын
Thanks Andy
@patmoto2 жыл бұрын
great video mate
@dreadnoughtcustoms2 жыл бұрын
Cheers fella
@andygraham23252 жыл бұрын
Whats the rear disc set up Thomas please?
@dreadnoughtcustoms2 жыл бұрын
I’m not too sure tbh mate, was on the car when I got it. Not really looked at it closely.
@andygraham23252 жыл бұрын
Would you be showing making the custom rear lights Thomas,still have'nt done mine.
@dreadnoughtcustoms2 жыл бұрын
Yes that is on the list as I’ve gotta make some for this car soon.
@andygraham23252 жыл бұрын
Love watching the progress buddy.
@dreadnoughtcustoms2 жыл бұрын
Cheers Andy
@lk.tuning2 жыл бұрын
Hello from Finland. Mirka Finnish stuff 🇫🇮
@dreadnoughtcustoms2 жыл бұрын
They produce good products 👍🏻
@DjDubUk2 жыл бұрын
Those Eyebrows..for US spec headlights?
@dreadnoughtcustoms2 жыл бұрын
They are designed for euro lights but can be chopped to fit the US lights. im working on an eyebrow for US lights which ill hopefully get finished this summer at some point.
@rcflyer20002 жыл бұрын
Thanks for this April update on your Sciroccos 🇬🇧 Great to see you putting some Carbon Fiber parts on you Sciroccos 👍👍👍 Will you be offering these Carbon Fiber parts on your website in the future?
@dreadnoughtcustoms2 жыл бұрын
Yes i will. I've a few things to finish on my own cars and then ill be spending a large chunk of time developing new products including a number of carbon fibre parts. Thanks for watching.
@motoflyte2 жыл бұрын
There's only one good thing about turning an old car into an EV.... It makes my original stock scirocco even rarer and more special. I'll let you get back to destroying a classic.
@jimmhb19862 жыл бұрын
What do you think this may be your car before you bought it. kzbin.info/www/bejne/eJWUhaNtn9Skeqc&feature=share
@jimmhb19862 жыл бұрын
It is in good enough shape to restore
@dreadnoughtcustoms2 жыл бұрын
100% the shells in pretty good condition, just needs some work on the bulkhead. Other than that it just needs rebuilding.
@jimmhb19862 жыл бұрын
Can you please make a video of removal & replacing the dash? I see that project in your future!
@surerocrepairs4482 жыл бұрын
Awesome!
@dreadnoughtcustoms2 жыл бұрын
Cheers buddy
@WolfHausMotorwerks2 жыл бұрын
Nice! It's coming along mate! Nice idea with the front spoiler!
@dreadnoughtcustoms2 жыл бұрын
cheers buddy
@russellrobson76322 жыл бұрын
Nice one Tom, it's coming together. By the way, my stainless fuel neck still mint after three years service! 👍
@dreadnoughtcustoms2 жыл бұрын
yep slowly getting back into one piece. glad the neck is still good, i suspect they should last the life of the vehicle
@lautrecvw2 жыл бұрын
Excellent! When will this front splitter be available for purchase? Thank you
@dreadnoughtcustoms2 жыл бұрын
Thanks for the reply. hopefully it should be ready for purchase in the first few months of 2022
@mk2daz2 жыл бұрын
Nice one Thomas!
@dreadnoughtcustoms2 жыл бұрын
Cheers Buddy
@ДимаБогун2 жыл бұрын
Hello) What about tutorial tail lights? I`ve bought 3 pairs of tail lights and waiting for the video :))
@dreadnoughtcustoms2 жыл бұрын
Yes, soon! I’m almost at the point where I need them for this car so I’ll make some and video it shortly
@ДимаБогун2 жыл бұрын
Do you have video with tutorial about custom tail lights (acrilyc lights)?
@dreadnoughtcustoms2 жыл бұрын
I will do soon, I’ve started a video on it but haven’t had time to finish them yet
@ДимаБогун2 жыл бұрын
@@dreadnoughtcustoms please finish that video. I bought an acryl, but I don`t know how to prepare it and shape it. Hope to see it soon!
@dreadnoughtcustoms2 жыл бұрын
@@ДимаБогун there is a how to written guide on my website. On the front page at the bottom is diy mod guides. In there is a link that has some info
@ДимаБогун2 жыл бұрын
@@dreadnoughtcustoms I saw it, and I have boought acryl yet. But how to shape it? I found many movies on youtube about it, but there are about simple shaping (90° or 45°), but in tutorial circle shaping. So, I will wait on video about it)
@dreadnoughtcustoms2 жыл бұрын
@@ДимаБогун ok, hopefully I will finish the video soon