#sciroccomk2 #buyersguide #vwscirocco Thinking of purchasing a Scirocco Mk2 then this might help a bit. Link to Dr Dubs Storm page which has loads of info on these car- www.sciroccore...
Пікірлер: 67
@cubby1702793 жыл бұрын
Awesome video. I’m currently halfway or so through getting my 1990 GT2 back on the road. It was a barn find. Had it for almost 7 years now. She’s not seen the road since 2004. I look forward to your next video.
@dreadnoughtcustoms3 жыл бұрын
Thanks buddy. Yeah I need to get some more videos done soon. Been too busy lately
@jimmhb19863 жыл бұрын
Great video. Thanks for all you do for us Rocco enthusiasts.
@dreadnoughtcustoms3 жыл бұрын
Not a problem mate, I enjoy it. Most of the time
@fridgemagnet3 жыл бұрын
just bought some gel gtx badges for my rocco from you guys. keep up the good work.
@dreadnoughtcustoms3 жыл бұрын
Cool, tag me in some pics once you’ve fitted them 👍🏻
@cloud_0_6 ай бұрын
I'm getting a 1988 Scala 'barn find' for free which should be a fun project. Dry stored in a garage for the past 20 years so hopefully in decent condition (haven't been able to fully inspect yet) - will probably get shot if it starts getting too pricey but can't complain for an upfront of £0. Very helpful video, will definitely be using it when I do my full inspection.
@heribertmueller96133 жыл бұрын
You know scirocco well, obviously. Braking system is in any case not like at modern cars, so caution is required, especially that that little 5th cylinder which is not pissible to find a spare one, when car is loaded to activate rear brakes. So, nice to have it, but one should know about it before he buys one. Nice video,nice narrative. Thanks.
@ParksandRecYT3 жыл бұрын
Taking a break from shooting my rear brake video. You've covered a lot - nice job. I'm in a pickle looking for roof rain gutters - nowhere to be found in the US. I'll have to start looking in junkyards unless you have any leads you can share. See you in the next video. Cheers!
@dreadnoughtcustoms3 жыл бұрын
I’m working on replacements, they won’t be oem copies though. I’ll hopefully have them sorted in next 6 weeks or so
@ParksandRecYT3 жыл бұрын
@@dreadnoughtcustoms Replacements would work for me. I just want to get as close to original as I can - I'd be interested if they could make it to the US in one piece. I ordered a reproduction rain tray from a guy in Canada - not exactly the same but does the job. Keep up the good work. I'm at smwag1@comcast.net when you have more info. Cheers!
@WrenchingWench3 жыл бұрын
Great video, even though I’ve already bought mine it’s given me some things to look at on it! As for video ideas, is there any chance you could do a video on how to remove the body kit? That’s the next big job for mine and it looks a bit daunting haha.
@dreadnoughtcustoms3 жыл бұрын
Yep, I can do a video on that, although it probably won’t be for a while until I repaint my gt2
@spongebob72963 жыл бұрын
The black one with the steelies is a beautiful specimen, I have a scirocco you might be interested in.
@dreadnoughtcustoms3 жыл бұрын
Thanks buddy. What have you got?
@spongebob72963 жыл бұрын
@@dreadnoughtcustoms Hey I got a 1982 scirocco that I built. It has a 16 valve dash and interior, a 16 valve fender flares and rockers panels all from a donor car as well trunk with the tail and I did an engine swap to a fresh 2.0L crate block and a ported and polished 8Valve cylinder head with larger valves and all that jazz. Supersprint headers Euro lights and euro bumpers. Im about to buy a hardened transmission rebuild kit for the 16 valve 5 speed manual trans because I broke it. 4 corners brakes upgrade from a golf gti and all new control arms and the list is extensively long so ill stop here
@dreadnoughtcustoms3 жыл бұрын
@@spongebob7296 sounds good mate
@Thecarbore783 жыл бұрын
Great video mate, really want one as my next project.
@dreadnoughtcustoms3 жыл бұрын
I want a beetle as one of my next projects (guessing you have beetles by ya name) the rocco’s are getting rarer so I’d snap one up soon if you want one.
@Thecarbore783 жыл бұрын
@@dreadnoughtcustoms you seem to have all the scirocco’s in Essex lol
@dreadnoughtcustoms3 жыл бұрын
Only 6 mate
@seshelbow3363 жыл бұрын
My Dad had an 82 GTI when I was a kid....doubt it’s still out there now TNU 347X. Black single wiper 1.6 with the 4 same size lights....he nearly got a Storm but as we arrived to look at it someone else had just bought it.
@dreadnoughtcustoms3 жыл бұрын
Love my gti. Great little cars. Never owned a storm, the saggy leather interiors put me off
@dreadnoughtcustoms3 жыл бұрын
Checked ya dads Reg number for recent mot’s. Nothing on the system so looks like it’s long gone.
@roofdownfun19 сағат бұрын
Hi bud, do you sell any spares at all? I have a 84 GTL and having bother with the sunroof opening on one side, worried about taking it apart due to lack of parts! Love your channel. 👍
@dreadnoughtcustoms34 минут бұрын
@@roofdownfun hello mate, yes got a load of old spares and bits n bobs. If you email me through the contacts list on. The website or pm me through insta/ facebook , let me know what ya need and can see what I have
@Shingetsu-ek6dk3 жыл бұрын
Quick question to all Where are all of you in the USA finding replacement parts? I have a 1988 mk2 Rocco
@dreadnoughtcustoms3 жыл бұрын
There’s plenty of Scirocco Facebook sales pages that will help you track down parts.
@basilenw2445 Жыл бұрын
Hi 😄👋 I love your videos you explain litteraly everything ppl need to check before buying. 👍 Just a quick question : Do you have any adress or retailer name for some High Beams ? I have a 1989 GT II and I'm searching everywhere to find one of these Hella high beams but seems like it has disappeared...
@dreadnoughtcustoms Жыл бұрын
Thanks buddy 👍🏻 the inner light high beams?
@basilenw2445 Жыл бұрын
@@dreadnoughtcustoms Yes exactly.👍
@dreadnoughtcustoms Жыл бұрын
@@basilenw2445 get in touch with Joost, he should have done although I think he’s away at the moment so don’t expect an immediate reply. scirocco-delen-eimers.nl/
@basilenw2445 Жыл бұрын
@@dreadnoughtcustoms Thanks a lot 😉👍. I'll get in touch with them as soon as possible.
@donaldduck38433 жыл бұрын
Great cars them sciroccos💪🏻👍🏻
@dreadnoughtcustoms3 жыл бұрын
I like them
@surerocrepairs4483 жыл бұрын
Oooh this is going to be a good watch
@dreadnoughtcustoms3 жыл бұрын
Was your idea!
@surerocrepairs4483 жыл бұрын
@@dreadnoughtcustoms I didn't think you'd make it that quick ! Really good video, well explained.
@happyknightinternationalma1163 жыл бұрын
Great video Tom, covering all of the bases. I have a 91 GT2 and it developed a fuel starvation problem a couple of years ago. After swapping out most of the fuel lines, pump, carb gasket and swirl pot etc; the only thing left was the inlet manifold gasket. That’s what it was in the end. No obvious damage to the gasket, but changing it did the trick. 👍.
@dreadnoughtcustoms3 жыл бұрын
@@happyknightinternationalma116 yeah those gaskets are a pain. At least you know the rest of the system is sorted also.
@stephengoben67913 жыл бұрын
Do you know where to find window seal kits?
@dreadnoughtcustoms3 жыл бұрын
What ones mate? There’s a few different positions.
@stephengoben67913 жыл бұрын
@@dreadnoughtcustoms I'm looking for all the seals around the door window. Have an 87 16v
@stephengoben67913 жыл бұрын
@@dreadnoughtcustoms I found your web site and asked the same question. you can message me thru there. Thanks
@dreadnoughtcustoms3 жыл бұрын
@@stephengoben6791 yep replied through there.
@rally_yellow8 ай бұрын
Thanks for a very useful video. In the bit about where to look for rust at 8:14 you say that rust around the rear beam mounts is the worst place for rust, can rust in that area be repaired (albeit with time and expertise) or is it actually not possible to safely sort it if it’s gone too far?
@dreadnoughtcustoms8 ай бұрын
Hi, it’s definitely fixeable, repair panels are available as they are the same as mk1 golf, but it’s probably not a cheap repair depending on how much you can do yourself
@rally_yellow8 ай бұрын
Thanks for the quick reply! Do you have a link for the repair panels you’re referring to please? And do you plan to get more fuel filler pipes in stock?
@dreadnoughtcustoms8 ай бұрын
@@rally_yellow yes I’ll hopefully be getting more filler necks at some point soon. Here’s a link- www.classic-vw.co.uk/mk1-golf-rear-beam-mount-repair-section-left-side-171801391-15179-p.asp
@rally_yellow8 ай бұрын
Thank you 👍🏻
@AnonymousCaveman3 жыл бұрын
I really want one in the future. Is there a particular ball park of price so I know if something is usually low or too much?
@dreadnoughtcustoms3 жыл бұрын
so many variables tbh mate, but roughly an mot'd car should fetch £1500+ depending on condition. projects anywhere from £300+ depending on condition and model etc.. There's a lot being advertised for what i see as crazy money, best way to get a rough idea is check fleabay and click the sold items button to see what other cars have sold for.
@AnonymousCaveman3 жыл бұрын
@@dreadnoughtcustoms I did not see the response to this glad I have now. Thank you thats very useful! 😁
@jonsvw20003 жыл бұрын
Great video! Quick question. The break fluid reservoir has a needle at the top that keeps on popping up. Is that an air pressure issue?
@dreadnoughtcustoms3 жыл бұрын
That might be part of a level sensor, imagine the needle presses a switch, when the level drops the switch is de-energised. So check you have wiring for the level sensor as the top may have pinged off. Think it just clips on.
@jonsvw20003 жыл бұрын
@@dreadnoughtcustoms okay. It is weird because when I push it down and rev the engine, it goes back up. Thanks.
@dreadnoughtcustoms3 жыл бұрын
@@jonsvw2000 that might be the vibration allowing the float switch to move up. Tough to see without pics
@RSmith12 жыл бұрын
Hi I'm getting a mk2 scirocco gtx put on the road im looking at changing the suspension, what would you recommend? I've seen Eibach Lowering Springs, Bilstein Gas Shocks not sure if you have used these . I've seen some very cheap coil overs which I will keep out the way of. Could you recommend any thank you
@dreadnoughtcustoms2 жыл бұрын
depends on budget and what you want really. bilsteins are meant to be good, ive aways fitted coilovers though. if your going for coilovers save up and get some with damper and height adjustments like bc's or gaz
@RSmith12 жыл бұрын
@@dreadnoughtcustoms thank you for the quick reply I will have a look about online for some . The car will only be used a few times a month as I have a daily driver I don't want to spend to much money yet as it's going to be going in for paint. I will be watching your videos for tips thanks
@kinglouiesshed89953 жыл бұрын
Could you put all the running gear from a mk4 4mo in to one of these ? 😍
@dreadnoughtcustoms3 жыл бұрын
You could, and it’s been done on some Mk1 golfs, but it’s a big job.
@bajca28013 жыл бұрын
pozdrav iz srbije od vlasnika siroka
@heribertmueller96133 жыл бұрын
I iz Bosne od jednog. Stara kola su problem, ali ova kola su kao spomenici.
@bajca28013 жыл бұрын
@@heribertmueller9613 NISAM VISE..PRODAO SAM GA PRE TRI DANA DUSA ME BOLI
@jassab80123 жыл бұрын
Umm, yeah, umm,yea....heavy breathing....yeah, um . Yeah. Um, um umm