Пікірлер
@russelblackwell6041 11 күн бұрын
it works to do 4 18" rims it takes 8 cans expensive my rims were painted twice 2 cans a rim i stopped after 2 cans
@IronMike777777 2 ай бұрын
Can't find the stuff.
@MadTinkerman 3 ай бұрын
Genius!! Thanks for the tip!!
@Chuckles1418 4 ай бұрын
Champion - thank you!
@Sebastopolmark 4 ай бұрын
Brilliant! !! !!!
@NatiLite 7 ай бұрын
GENIUS
@RamblinManMoto 7 ай бұрын
Stumbled on this video after my failed attempt today. I can attest to the point to put them on both sides as I did only one and indeed it folded like a banana. Lesson learned.
@kalvinporter2451 Жыл бұрын
Thankyou awesome
@russellpritchard743 Жыл бұрын
Just an update. I believe in some countries they have removed the chemical from this product that makes it effective on powder coated. I know that it still works here in Australia. Dichloromethane I believe it is. So probably better to check and see if the product sold in your country still has this chemical in it.
@HAL9000-su1mz 5 ай бұрын
Precisely! "Methylene Chloride" by its other name. Used to decaffeinate coffee beans but we CANNOT BUY IT!
@arkangelnorthman Жыл бұрын
not
@congamike1 Жыл бұрын
Thanks!
@johnnytocino9313 Жыл бұрын
You're a f-ing genius dude. Thanks for the tip! From Baltimore USA! Peace!
@chadwickwicky67 Жыл бұрын
Note to self, don’t use gasket stripper to clean my nicely powder coated valve cover gasket surface 😮. Good to know tho. I’m about to redo my rear calipers !
@rsz90182 Жыл бұрын
You used a $25 can to remove some paint but you ruined your MDF board!!! You could have put a piece of cardboard under it.
@russellpritchard743 Жыл бұрын
Really? That’s what you’re worried about? I don’t know where you live, but a can of gasket stripper doesn’t cost anywhere near $25 here. Besides, it’s just an off cut of board that I use for all sorts of odd jobs like this on. I’m still using it to this day.
@ethanvilla4418 Жыл бұрын
Will you recommend this for brembo calipers?
@jamespolucha8790 Жыл бұрын
There’s a new product out called RIM STRIPPER but it’s way too expensive but if you soak a car wheel in it all the powder coated stuff just falls off, it’s $700 for 5 gallons
@eggiemybaby Жыл бұрын
I want to repaint my powder coated metal table
@AB-LITE 2 жыл бұрын
How i can remove podwer coating paint from led bulb chip made by aluminium
@rsmail7426 2 жыл бұрын
Being clever with a lever..
@mrgcav 2 жыл бұрын
Does not work any more. CRC changed the formula.
@russellpritchard743 2 жыл бұрын
When did they change it? I've been using that stuff for years.
@AarahN Жыл бұрын
It still works, been doing it myself
@ajglover201 2 жыл бұрын
I would have had that powder coat of in 3 mins with my sandblasting gun
@WiSeNhEiMeR-1369 2 жыл бұрын
Thanks :-) GENIUS & Easy COOP ...
@milesteg402 2 жыл бұрын
Nice one mate. In a pinch a stack of 5cent pieces could work…. Which would make it a $1 fix .🙂
@moonolyth 2 жыл бұрын
Very good !! will do Wondering if you could spray then place in baggy or wrap in foil for better penitration less spray.
@russellpritchard743 2 жыл бұрын
that would probably work. It does dry out quickly, especially in hot weather, and I'm sure putting it in a bag would minimise that. Good idea. Thanks.
@OldMotorbikeMan 2 жыл бұрын
100% works ,ive herd basically any thing containg 'dichloromethane' in a 30%+(min) is what removes the powdercoat,thank you for the vid,just saved me 175+ getting 2 very small parts soda or glass blasted,ps took some hard scraching with the plastic side of the brush n not the brush for me,but i think cos its almost 100c temp day in west aus & the crc was drying way to fast to have time to eat into the coating effectivly,but yep 100%job done,awsome share vid bro thankyou
@russellpritchard743 2 жыл бұрын
Yeah it does dry out quickly in hot weather. A guy in another comment suggested spraying them, and then putting them in a plastic bag, or ice cream container or something, so it can continue to eat into the powdercoat without drying out.
@77Avadon77 Жыл бұрын
@@russellpritchard743 yes air is your enemy. Spray them and then put them in a sandwich/bread bag and twist it up tight. Then you can actually massage it with hands. Hopefully it doesn't eat through plastic bags? I use "Great Value" Plastic Bread Bags for this kind of thing. One thing i like is that you're not using mechanical means which can damage sensitive parts or change dimensional tolerances.
@KevinNguyen-zn4vv 2 жыл бұрын
Didn't do anything to my powder coated aluminum wheels because coats are darn thick. Primer/Color/Clear adds up to ~1/32 to 1/16 inch.
@shanecrawford2114 2 жыл бұрын
How did you get it off bro
@klegraefe Жыл бұрын
Sames im running out of ideas here. My sandblaster with aluminum oxide media couldn’t even do it. 🤦🏻♂️
@paulthompson1654 3 жыл бұрын
hi There are 2 ways chemicals strip powder coat . 1/ dissolving the coating 2 /separating the coating from substrate At least 3 different paint stripper types 1x new version almost does not work 2x older chemicals [1 is banned in the USA ] All 3 chemicals are in Aust.
@trfisher78 3 жыл бұрын
Does it hurt chrome?
@richardbonn3882 3 жыл бұрын
Thanks bro ! Great job !
@Albert87nl 3 жыл бұрын
gonna give this a go. i hope my part wasnt blasted before it happend (y)
@captainr.8882 3 жыл бұрын
SANDBLASTING will not remove the sh*t either. I just paid 800 dollars today to TRY to have PC removed from my ATV trailer and it would not blast off, even in an industrial blaster, which is why Im looking at videos of how to do it myself.
@ajglover201 2 жыл бұрын
Don't have the right people doing it. I've taken off triple powder coat off a 10000 gallon tank in less than an hour with a blast gun
@vunit8213 3 жыл бұрын
Awesome new trick to add to my arsenal. 👏 😎
@ahcrx 3 жыл бұрын
Can I use this on my alloy wheels? I have 30 years of baked up brake dust and corrosion at the back of the wheel.
@russellpritchard743 Жыл бұрын
Yes I have used it on alloy wheels with no problems.
@iamvictoriakaroline1603 3 жыл бұрын
Can this technique need to be used on a small patch of powder coating without ruining the coating that surrounds the area, if taped off properly? The guys who powder coated my bike covered the brake assembly stems, and they're supposed to be bare metal. I can't install my brakes until I remove the coating.
@burntham8752 3 жыл бұрын
Idk
@RrR__RrR 3 жыл бұрын
Thanks a lot! I will definately try this.
@cebermac 3 жыл бұрын
Thanks bro. Didn’t know this method and purchased also a can of casket removal.
@russellpritchard743 3 жыл бұрын
Did it work for you Stefan?
@alanballou1587 3 жыл бұрын
could you use a pressure washer to clean it off after spraying it with the CRC Gasket Stripper
@brianpreston4121 Жыл бұрын
Yes you can
@obbzerver 3 жыл бұрын
Be careful about breathing that stuff in though - probably be a good idea to wear a pro paint respirator, I'm sure it does a number on your lungs.
@maheshsamarakoon007 4 жыл бұрын
Hi mate.tnx lot for great video.after I watch this video I done my factory Nissan bull bar with 3 cans of this CRC product straight to bare metal no problem. Then bit sanding .highly recommended this product.tnx Russell 👍🏻👍🏻👍🏻
@rOb1842 4 жыл бұрын
I just tried and does not work so don’t know how it worked with you.
@russellpritchard743 4 жыл бұрын
Been working for me for years. Maybe where you live, they use different ingredients? I know in some countries, certain chemicals are banned, and some companies have to change the recipe for their products for sale in those countries. Maybe that is the case where you are? I am in Australia, and it works great here.
@carlsemineriorockfordil6796 4 жыл бұрын
Yeah that may be exactly right. They just changed the formula on ours due to regulations and now it doesn’t work
@foesix3 3 жыл бұрын
Are you 100% sure that's powdercoat on you part? The way it's reacting it looks like paint. I'm in Australia, bought the same CRC product and it isn't stripping my powdercoated part.
@russellpritchard743 2 жыл бұрын
@@foesix3 yep, definitely powdercoat. I had that part, and a few other parts all powdercoated together at the same time.
@davidgraham3162 4 жыл бұрын
Wow
@after__hours 4 жыл бұрын
Great Video ! Do you know if this would damage aluminum? I am planning to try this on aluminum wheels . Cheers !
@russellpritchard743 4 жыл бұрын
Yes it works just fine on aluminium. I have used it on aluminium as many times as I have on steel, and have never had any problems with it damaging the aluminium.
@cagri7184 4 жыл бұрын
@@russellpritchard743 what about steel? did anything happen bad to steel. I'm planning to use it on my old bicycle
@russellpritchard743 4 жыл бұрын
@@cagri7184I have never had it affect steel either. Mind you, you need to paint, or re-powdercoat steel very quickly, as it starts to rust very quickly. The bracket in the video was steel. It is now re-powdercoated, and re-installed on the bike.
@jeremysmith9088 4 жыл бұрын
Wow, thank you for the video, I've been struggling with stripping powder coating,this other guy mixed like 5 chemicals I didn't have, this is way easier