Пікірлер
@stevepooran2240 9 сағат бұрын
Why cant you share the sound quality . Until you do i believe it sounds bad
@jaberra Күн бұрын
where did you get the door pods
@jorgedoimeadios1795 2 күн бұрын
Love the vid bro help a lot but one question how do I add a epicenter to the perv dsp
@NvWatts 7 күн бұрын
Noob question, I have factory head unit with lc7i pro how would I go about adding this to my system?
@12voltfever 7 күн бұрын
@@NvWatts have the switches set to sum, connect the channel 1 output to the DSP input.
@a.kthe_tal 10 күн бұрын
Beautiful
@12voltfever 9 күн бұрын
@@a.kthe_tal thank you
@justinwalker2460 10 күн бұрын
What do you do with it? Is this for a contest?
@12voltfever 9 күн бұрын
@@justinwalker2460 not sure where you're from but on the East Coast of the US this is a culture thing. We do this in Florida to go out with a bunch of cars and play outside. Sometimes at shows sometimes in the back streets. Sometimes we battle 😎
@Roberob1189 10 күн бұрын
Lgbt lights!
@NakiriX1 10 күн бұрын
huh
@a.kthe_tal 10 күн бұрын
😂
@12voltfever 9 күн бұрын
@@Roberob1189 😅
@JimmyBoy87 10 күн бұрын
I’m running sound digital 800.4 4ohm amp And have 4 midbass prv 4ohm speakers 200watts rms how do I run it 1 speaker per channel or do I bridge them description of the app says Power @2ohm 4x200 rms Power @4ohm 4x 132rms I’m confused
@a.kthe_tal 10 күн бұрын
Nice setup...would like a longer video
@12voltfever 9 күн бұрын
@@a.kthe_tal I can do a feature video
@a.kthe_tal 9 күн бұрын
@@12voltfever anything would be great💪
@JimmyBoy87 10 күн бұрын
Hey I’m running prv midbass and the same dsp what should I set my input and output parametric EQ to?
@12voltfever 9 күн бұрын
@@JimmyBoy87 leave the input parametric alone. You can set the output for the midbass around 100hz to 120hz to get more punch
@JimmyBoy87 9 күн бұрын
@ ok thank you a lot so I just leave the input at 1k because that’s how it comes default
@ironhead320 11 күн бұрын
My question with the way mine is set the left side is the rear speaker and the right is the front.Now is that hooked up wrong
@ironhead320 14 күн бұрын
So if your hooking up to a 4 channel amp and you want stereo would you leave channel 1 and 2 set to A+B
@12voltfever 12 күн бұрын
A+B will not give you any stereo sound. A+B mixes left and right together, mono signal. A is LEFT and B is RIGHT. So whatever output you want to be a left you set to A. Whatever output you want to be a right you set to B.
@josesierra9943 14 күн бұрын
Can you run 2 deaf bonce Sylvester
@12voltfever 12 күн бұрын
You sure can
@drvictoria07 15 күн бұрын
Awesome my G!! I wanted more knowledge on how many dsps would i need for 10 four channel amplifiers, 2 monoblock amplifiers and one 8 channel gain amplifier. I already have a 5 band eq.
@12voltfever 12 күн бұрын
How many EQ is not dependent on how many amps you have. It depends on how many different components you have.
@12voltfever 12 күн бұрын
When my subscriptions are open, if you subscribe, I can answer how to do everything you need in detail
@ArronYouSeeItMalachi 17 күн бұрын
Damn it! I wanted to hear the beat drop on the GUARACHA!
@Alejandro-ho1fh 19 күн бұрын
How did u run power through the fire wall on this lil thing
@12voltfever 12 күн бұрын
I dont even remember. I may have drilled an access hole. I always try to find a rubber access that I can cut into.
@Alejandro-ho1fh 11 күн бұрын
@@12voltfever I just did mine today 0 gauge there is an access panel on driver side then a big grommet I cut a hole it was a real pain
@lokomono89 19 күн бұрын
Can you use this dsp with a audio control loc
@12voltfever 16 күн бұрын
@@lokomono89 yes just run it to the RCA cables to the DSP input from the LOC
@lokomono89 16 күн бұрын
Thank you!!
@kayone8571 20 күн бұрын
When you split the leads at the amp for 2/3 say on one channel nothing plays on A only b or both a+b I don’t know why 0:55 SO
@12voltfever 12 күн бұрын
Then you don't have anything coming in from A.
@kayone8571 20 күн бұрын
Can you please reply changing the name on screen saver where is the space bottom
@12voltfever 16 күн бұрын
@@kayone8571 there is no space just underscore _
@kayone8571 14 күн бұрын
@@12voltfever ok so I’m correct about you can actually change the main prv screen saver you can have up in the settings
@OS-me4pq 20 күн бұрын
pls reply. how do they split the hz on all elements like the drivers, 10 inch speaker and the bigger speakers
@12voltfever 16 күн бұрын
@@OS-me4pq using a PRV DSP
@teneyuquejustin26 21 күн бұрын
Hey Tim so adding 2 eqs to my 2.8 if I route 1 and 2 to A and 3 and 4 to B when I adjust my eq for midbass on 3 will it affect my sub bass or other frequencies
@12voltfever 16 күн бұрын
@@teneyuquejustin26 trying to understand. You want to put outputs 1 and 2 to 1 eq. Then 3 and 4 to another eq. Usually, the EQ band frequency adjustments will affect anything connected to it, including subwoofers on the sub output. I would run your subs straight off the subwoofer outout from the radio.
@teneyuquejustin26 16 күн бұрын
@12voltfever So I don't get to use the dsp for woofer settings /control
@reginaldpettwaysr8203 27 күн бұрын
Can you wire a bass knob and a 3way crossover to the prv 2.4 dsp
@12voltfever 16 күн бұрын
@@reginaldpettwaysr8203 sure, put the 3way on one of the outputs. And bass knob in between them.
@reginaldpettwaysr8203 16 күн бұрын
@12voltfever ok can u explain when you say in between i be over thinking it
@reginaldpettwaysr8203 16 күн бұрын
And can u explain when you say in between and also I watch your videos but didn't see how you set the hz but if am correct this is what I did am running 6 8mr600x 8ohm per door and the web site says set the hz at 165 and hz between 85-8500 and bt at 12 what is the - 10db were is that located
@jayshafer16 28 күн бұрын
how would I run the zen a2b with all those outputs to a to a marts btx8 with it having only 4 inputs but 8 outputs? Would I do 2 to 1 Rca's for the front left and right then 2 to 1 rca for the rear left and right
@12voltfever 16 күн бұрын
@@jayshafer16 unless you already have it, don't waste your money on the ZEN, get a PAC AMP PRO Module. If you already have it, just use front left and front right outputs to the PRV DSP inputs.
@jayshafer16 16 күн бұрын
Yes, I have the Zen a2b already installed. Just adding the Marts or my audio control DQ61
@djgblaze1of1 Ай бұрын
Thankyou I’m subbing a Lc7 as my radio since my radio can’t be replaced
@12voltfever 16 күн бұрын
@@djgblaze1of1 the LC7 main output can go into the DSP input
@kayone8571 Ай бұрын
Can you use one phono to split lead or is it best to to run two phono off to each amp
@12voltfever 16 күн бұрын
@@kayone8571 you can run 1 just RCA to a 1 channel amp
@kayone8571 16 күн бұрын
@ you can but it’s will only be a+b or b (a) will turn it speakers off no sound
@kayone8571 16 күн бұрын
With one lead
@kayone8571 16 күн бұрын
@ and the screen saver you cannot change the main display where it says prv 2.8 that permanent on main screen When you put words in the edit there no space bar either
@sfvirgo Ай бұрын
that song he played was from the stained glass window facebook video🤣🤣🤣🤣🤣🤣
@12voltfever 16 күн бұрын
@@sfvirgo Dixon Waz - Toco toco to
@hunterraffety Ай бұрын
Hey thanks for the video, stumbled across it while needing to temporarily install a Banda BD400.4 4 channel amplifier, the 6 speaker terminals had me scratching my head! Thanks man!
@12voltfever 16 күн бұрын
@@hunterraffety glad you found it helpful
@brandonar868 Ай бұрын
Can the first example be used to wire (4) 4ohm 6.5 speakers? Not this specific amp but a similar Brazilian style. Therefore get a 4 channel output, Front L/R and Rear L/R...
@12voltfever 16 күн бұрын
@@brandonar868 you can sure wire 1 speaker per channel. Keep in mind most amps are 2ohms per channel and running them at 4 ohms will pull about half the rated power.
@shauntestamark3647 Ай бұрын
Can you please tell me what format you use to get your cm from the 22" for the Tw ?
@12voltfever 16 күн бұрын
@@shauntestamark3647 search Google inches to cm
@ruryspayan3942 Ай бұрын
I pit this on my can am with two jl 250 watts and this little amp hits hard!!!! I am surprice and would defenetly recomend it...very happy with it
@12voltfever 12 күн бұрын
That's a great setup! I use these MDX amplifiers A LOT
@firefoxchu Ай бұрын
how the pass filter work??
@12voltfever 12 күн бұрын
Choose between a fixed HPF at 90Hz (plays 90 and above) or LPF at 90Hz + 45Hz Bass Boost (plays 90 and below) or just turn it FLAT and use your external crossover or DSP settings. It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.
@brandonbrewer8447 Ай бұрын
If I have 2x 4 ohm 6x9's. And I wanted to wire them in the bridged 4 ohm mode on one side, would it work?
@12voltfever 12 күн бұрын
You can only wire them 1 per side bridged. Not both on 1 side. Both on 1 side would be 2 ohms.
@JoesiahFlores-w2n Ай бұрын
Yo brother
@12voltfever 12 күн бұрын
yooo
@carlneuman5958 2 ай бұрын
Are these mdx Amps putting out full rated power?
@12voltfever 12 күн бұрын
Yes, the MDX amplifiers are little power houses for sure giving the power they are supposed to
@kayone8571 2 ай бұрын
Welll nice ❤
@12voltfever 12 күн бұрын
Thank you
@kayone8571 2 ай бұрын
Subscribe
@kayone8571 2 ай бұрын
After searching for hours your close but I’m wanting to know exactly what you have set up on the bench what are settings for subs Only down fall for me is my I have two bass knobs digital plug and play sundown and deaf bonce but I can still put another bass knob in-line that’s no problem and leave others up if I’m going to run the subs off this dsp
@12voltfever 12 күн бұрын
What do I have setup on the bench? as in my test bench? Settings for subs on the DSP? RCA bass knob is always the best option.
@kayone8571 2 ай бұрын
16:02 what about the sub woofer out puts no one showing this on this unit why is that 🎉 16:14
@12voltfever 12 күн бұрын
There is no subwoofer output. All of the outputs are the same. You tune it how you need it for each output. From 10hz-22000hz.
@krustythecarhauler 2 ай бұрын
The only problem I have with a dsp is I listen to all different kinds of music I don’t wanna stop every song to ajust the eq I always use a eq only
@12voltfever 12 күн бұрын
That is a non issue. Tune it how you like it and play it.
@linx5573 2 ай бұрын
Hmm...look like my own vehicle
@TheMasterkiller24 2 ай бұрын
What class amps are the mdx series??
@12voltfever 12 күн бұрын
Class D
@WelileSiasiaMayekiso 2 ай бұрын
My bro pkz i need yo help i have a dixon equalizer, sony dsx a410bt car radio, jebson amp for my 2 subs and another amp for my front speakers now im confused on how to connect that, im using it at home, plz assist me
@12voltfever 12 күн бұрын
I am not sure how I can help with the limited information provided.
@strobaholic 2 ай бұрын
A few years ago, I had a neo magnet on my work bench that got too close to a razor blade. Damn near took my finger off!
@12voltfever 12 күн бұрын
Yes they can be aggressive
@mr.89irocz 2 ай бұрын
Can this be used with epicenter? How do you wire it up? Thank for the review.
@12voltfever Ай бұрын
@@mr.89irocz epicenter needs full range signal. Not recommended to put this with epicenter.
@nick_sometin7791 2 ай бұрын
I plan to do 16k Watts, how many 0 gauge or 2/0 gauge should i run to my batteries
@12voltfever 12 күн бұрын
Just 1 will be fine if its mids and highs
@kontrollme9034 2 ай бұрын
Let me guess, it's for a fellow 🇩🇴😅
@12voltfever Ай бұрын
@@kontrollme9034 Brazilian!
@s16non 3 ай бұрын
I have a noob question. I would like to install a DSP to my set up but im using the stock head unit. I spliced the main harness to be able to use a 5 channel L.O.C, do i or can i use that as my input with out messing with gains before the DSP? Main thing is, i want to set gains properly.
@12voltfever 12 күн бұрын
You need to use a line output converter. But which one depends on the car/ radio you have.
@charleswilliams2556 3 ай бұрын
I have a question for you! Can I run 4 timpano tpt mr6 bullets and 4 skar fsx midranges off a taramps ds2000 I already have a timpano tpt500.4 for my super tweeters?
@12voltfever 12 күн бұрын
If they are all 4 ohms, run 2 speakers per channel.
@charleswilliams2556 12 күн бұрын
@@12voltfeveryes they are and I really appreciate the value information buddy
@Fxcle 3 ай бұрын
Hey man I really appreciate your effort on doing this video, just want to ask one question about how many band can you change on parametric EQ per channel thanks
@12voltfever 12 күн бұрын
Just 1.
@edgarflores2093 3 ай бұрын
What did you use for power supply?
@12voltfever 12 күн бұрын
Small SLA battery