I'm not entirely sure - it may be that a built in one is the same as a free-standing one except that it has fixings to buid it into your unit. It's likely it would have to be removed as an unit first.
@billmalec2 ай бұрын
@@TrystansWorkbench I found mine. Just had to remove an access panel (actually the vent) at the top of the oven and then a small metal cover. It's a 30w bulb.
@acidnaught742 ай бұрын
Thanks for this! I like to leave the microwave door open, and hate to see the light, so I wanted to know how to just take the bulb off!😅 So again: thanks a lot!
@TrystansWorkbench2 ай бұрын
That;s a novel idea - thanks for your comment I tend to just unplug our microwave - I also like to leave the open to vent off any cooking odours.
@langofarias60102 ай бұрын
Legend! thanks mate!!!!
@TrystansWorkbench2 ай бұрын
You're most welcome! Let there be light!
@ChaplainDaveSparks2 ай бұрын
_”Put your transistors in the right way around”?_ It matters? *Now you tell me!* The only kit I put together was a *_Heathkit_* (remember them? Are they still around?) dot matrix printer back in the 1980s. I assembled it, but couldn’t make it work. Finally, I brought it back to the store. The techs managed to get it working. The problem? A transistor or three put in backwards and the odd cold solder joint … *73 de AF6AS*
@mr.transposon50172 ай бұрын
Currently looking for an appliance repair company where I can drop it off instead of having them come out to replace the bulb on my countertop Black & Decker microwave.
@TrystansWorkbench2 ай бұрын
Well at least now you now know what they'll do when they replace it for you.
@RErnie-gv1hv3 ай бұрын
Our microwave is a Farberware, Model FM012AHTBKE. Would your instructions apply to that also?
@TrystansWorkbench3 ай бұрын
Many microwaves are made almost identically, so yes, there is a very good chance that it will be the same or very similar. Although, having said that it looks like this video may cover your microwave better: kzbin.info/www/bejne/eV7CZ5RsgZWabq8si=xhkJNUGMBEGx6yxL&t=18
@mrobarton71923 ай бұрын
GR8 JOB MATE!
@TrystansWorkbench3 ай бұрын
Many thanks :)
@forgottenamericana3 ай бұрын
No BS and straight up...NY style...Love it
@tripjet9994 ай бұрын
Make sure that you don't handle the new bulb with bare hands, which will leave oil on the surface and may shorten the life of the bulb. If you DO handle the bulb with bare hands, make sure you use glass cleaner to carefully clean the bulb, prior to reassembly.
@TrystansWorkbench4 ай бұрын
That is indeed a good thing to do with halogen bulbs, but it's unnecessary on these incandescent bulbs.
@cbr100095 ай бұрын
does cm108 work with windows 11?
@TrystansWorkbench5 ай бұрын
Yes, almost certainly.
@kevinhamiltonfreek56525 ай бұрын
how to make cable for motorola radio
@TrystansWorkbench5 ай бұрын
Are you asking a question?
@loueckert49705 ай бұрын
Hope to catch you on 6M de KT1R
@TheFretman26 ай бұрын
Great presentation!
@migalito19557 ай бұрын
Cool beans. Intend to make one this winter....
@StanislavTugushev7 ай бұрын
Wasn't easier to connect just not use bias voltage if it is not needed? The bias voltage is wired to the RING of the mic connector and the actual bias-free input is the TIP of it. Just connect your source that does not like the bias voltage to the tip and ground it to the sleeve.
@TrystansWorkbench7 ай бұрын
To not use the bias voltage you'd have to solder another TRS plug and socket. That will cost you money and some solder joints. Just removing one resistor is easier.
@StanislavTugushev7 ай бұрын
If you don't want to use bias voltage, there are two ways without damaging the sound card itself. 1. Use TS plug to connect. This way the bias voltage will be grounded. 2. Use TRS plug to connect and do not ot use ring connection on it. The above methods do not require SMD soldering, do not reduce the sound card functionality and do not need any extra components.
@rockitbitz8 ай бұрын
Thanks. Fortunately my Goodmans microwave had an identical socket to your one, I had no idea where the bulb was situated until I spotted that!
@AussieAndyHardy8 ай бұрын
Thanks so much for posting this..! Just stumbled across it. I really love telling this story and am grateful you recorded my presentation..! Merry Christmas and 73 de G1AJH 😎
@David-dr3jn8 ай бұрын
I enjoyed that anymore Projects like this?
@M0NTVHomebrewing4 ай бұрын
Cheers David. There's a truck-load of projects on my KZbin channel: kzbin.info Enjoy :)
@DXJungle9 ай бұрын
Greetings from Texas. 🤝
@joshandersons69149 ай бұрын
👍
@TrystansWorkbench9 ай бұрын
Cheers!
@nightshade3059 ай бұрын
Thank you
@TrystansWorkbench2 ай бұрын
You are most welcome.
@mackandsneeze37489 ай бұрын
Super helpful video. I almost lost hope for transferring my drive when I saw it had a disk drive.
@denisdb72510 ай бұрын
Hello, Is a LED lamp with E14 fiting ok to be used in a microwave?
@TrystansWorkbench10 ай бұрын
No, an LED would be unsuitable for a microwave.
@ralph998711 ай бұрын
Such a shame that you guys didnt explain the pathways, nor how to start learning. Start at which speed, start with which letters. Which combination of letters? Left frustrated on how to startand when to start to learn when to send?....
@dcolb12111 ай бұрын
If that is a halogen light bulb, you should always clean off any oils and fingerprints before energizing it. They will fail prematurely if they're not perfectly clean.
@TrystansWorkbench11 ай бұрын
It's not a halogen bulb, but it's a good tip for car headlight bulbs.
@caoeason910211 ай бұрын
Short wave morse code communication is the only communication technology we humans have to enable long distance international communication without relaying station, such as underwater cables or satellite stations
@TrystansWorkbench11 ай бұрын
That's true if we don't have the use of computers. There are digital modes that are computer generated that have the edge on morse, but they are much less fun.
@michaeldominy2084 Жыл бұрын
Hello, Can you say what make of microwave you have, as I can’t find a bulb holder for a screw in bulb for a microwave.🤔😊
@TrystansWorkbench Жыл бұрын
It is just an 'unbranded' microwave with a ghost brand 'On'. The bulb you get is a called an 'Oven Bulb', they are pretty standard.
@user-tl5tt5yw3c Жыл бұрын
Hello ,to anyone worried Abt mistakes most of the time the person that's able to head copy knows what the other person meant to send if a mistake was sent,thanks for vid
@dmansf49ers71 Жыл бұрын
No biggie!! Thanks a million 🤙👍
@TrystansWorkbench Жыл бұрын
You're most welcome. Enjoy watching your food going round.
@dmansf49ers71 Жыл бұрын
@@TrystansWorkbench 🤙😎🤪🤪🤪
@bodhi974 Жыл бұрын
Great video. I am new to CW although I have a fascination with it since I was a kid. It has always intimidated me and kept me from getting my ham license believing I had to show proficiency in it. During the Covid issue I did obtain my tech license and look forward to getting additional licenses. I do not have equipment yet but will with in the next couple of weeks and want to join the club to learn CW. This is going to be a fun ride. I also realized I live one county over from Jim.
@aliceneebe4007 Жыл бұрын
I am 87. I do what I can. It is so much fun.
@gpbarth Жыл бұрын
DE N4YVN - I'm an ADHD guy. I got my General in the 80's, and I taught myself the code to pass 13 wpm, and all I had was a UHF/VHF HT...no base on HF, so no continuation of code on the air. Fast forward 2023, and I have decided to get back on the air, CW only, although I haven''t got a transceiver yet. Anyone who knows ADHD will understand, but I have built a power supply, a Morserino, bought a set of paddles, and practice regularly on G4FON and LCWO. I'll be purchasing an ARRL EFHW for 10-40m shortly, because I'm also running an RTL-DSR dongle to monitor all the bands. I may just come on over and join your group to get going, when I finally get the final piece - my radio. Not interested in high power or voice - QRP is fine - so I'm looking for something like a Mountain Topper. But I needed encouragement for the CW, and this video is great. I've always been self-taught, and sometimes, that leads to erroneous styles of learning...your group should ground me in that way.
@TrystansWorkbench Жыл бұрын
Thanks for your comment. Yes it's well worth joining LICW to progress your morse. I don't know a great deal directly about ADHD, but I imagine being part of a group that can give structure to you improving your morse would help immensely. It's generally a good idea to get on the air to really improve. . I don't think the Mountain Topper even has a volume control does it? The Mountain Topper is a good choice for going up a mountain, but there are better choices for general operating - check out the QRP-Labs QCX-mini for example. Keep at it. Good luck.
@deltafour1212 Жыл бұрын
Is there a reason why they don't teach the alphabet in alphabetical order?
@TrystansWorkbench Жыл бұрын
Yes, morse is taught in the order of easier characters first. Once these are grasped the longer (and less used) characters are taught.
@deltafour1212 Жыл бұрын
@@TrystansWorkbench Thank you!
@AgentSmith911 Жыл бұрын
Why does it have to be so hard? Why can't they just have a lid you can open from the inside to change it easily -.-
@TrystansWorkbench Жыл бұрын
Great comment! They probably make it hard hoping we just buy a new microwave.
@tsol438 Жыл бұрын
The hams in my area weren't very welcoming and I've heard cw hams are much nicer and more forgiving if you make mistakes. I went to 1 club meeting and I felt rejected and shunned. Had my tech license since 2008. I haven't worked it. One ham came up later to me in public and was said "Youre a ham but you don't work your license". Well...they didn't wanna talk to me at the club meeting. Why would they talk to me on the air? 🤷🏻♀️ CW has me wanting to get into ham for good.
@gregoryhorwitz7373 Жыл бұрын
What fun listening to all of you. Great presentation and response from your club.
@emadavazpour3358 Жыл бұрын
Thank YOU...Very effective, concise and to the point and helpful.
@TrystansWorkbench Жыл бұрын
Thanks for your comment - glad you found it useful.
@randyrussell6246 Жыл бұрын
Clive Owen's changes light bulb 💡
@tripjet9994 ай бұрын
"Clive Owen's"...what?
@TrystansWorkbench2 ай бұрын
@@tripjet999 I didn't know what that meant either.
@DominoStorm1 Жыл бұрын
I wonder if just for fun if you guys acquired some original authentic FCC novice and general cw exams and administer than just to see if students could pass?
@annies8075 Жыл бұрын
Well after watching your video, I think that I'll use the microwave with no bulb working as I don't feel like getting nuked. Plus I'm disabled, so removing the microwave cover is not an easy task for me. Would be so simple if the bulb was in it's own compartment at the side of the microwave......wonder why manufacturers don't do that.
@PedroCorral.1474 ай бұрын
Exactly.! I wonder why manufacturers always put stuff around important pieces you might have to work on, sometimes the actual items end up being more fucked up than when I touched them in the first place, that's why I don't Fuck with them either 🫤
@TopKekLethal Жыл бұрын
Quick and easy and I made sure to wear shock insulation gloves
@TrystansWorkbench2 ай бұрын
Well I'm glad you lived to survive the bulb change.
@oasntet Жыл бұрын
This worked for a new QRZ-1 Explorer (the free promotion radio still good until the end of October) - it doesn't come with a programmer, but I had a CP2102 and some patch cables and sockets. Ended up being TX (on the UART) to the 3.5mm sleeve and RX (also on the UART) to the 2.5mm ring. That does mean that from the radio's point of view, your chart at 0:22 is right; but from the UART's PoV it's reversed. Nothing bad happens if you reverse those. CHIRP now works with the QRZ-1, as well.
@kaybhee6 Жыл бұрын
what min max vpp needed
@camofpv Жыл бұрын
Forgive my ignorance, but why not add resistor directly on a speaker?
@TrystansWorkbench Жыл бұрын
You could do that yes, but you'd have more hiss/noise. Turning down the gain (amplification) earlier on in the circuit results in less noise. A very good question - and thanks for your comment.
@carlosaceves94482 жыл бұрын
Buen video, saludos desde México.
@louissanderson7192 жыл бұрын
Saw Andy’s comments on PPRUNE talking about wanting to do this! Cool to see a vid on it
@TrystansWorkbench2 жыл бұрын
Thanks for your comment - yes what an incredible journey they had - with only one engine too.
@Mr-Raptor2 жыл бұрын
i dont have that black paper thing
@jameskaras43452 жыл бұрын
i left mine in 12,4 volts connected to my cb..works ok..