Ай бұрын
6 ай бұрын
10 ай бұрын
2 жыл бұрын
Пікірлер
@writerjmd 3 күн бұрын
Well, I tested our capacitor and it is just fine. I have a capacitor tester and ESR tester and both were good. I am reading from some other sources that there is some actuator that might be the problem.
@ryantheteknishun9377 2 күн бұрын
If you mean the shift actuator, then yes that is a common problem with these style washers
@writerjmd Күн бұрын
@@ryantheteknishun9377 It WAS the shift actuator. I replaced it today, and we're back in business.
@ryantheteknishun9377 19 сағат бұрын
@@writerjmdgood work!
@writerjmd 3 күн бұрын
We have one of these washers and I'm going to test our capacitor to see if it is good or not. If it is bad, you will have really helped us.
@fernandovitela4034 5 күн бұрын
Where u buy capacitor and much
@ryantheteknishun9377 4 күн бұрын
Any reputable appliance parts stores or websites. Parts Dr., AppliancePartsPros, PartsSelect, etc. eBay is also an option if you’re on a tight budget. You may find new and used ones there
@yourfriendma74 15 күн бұрын
I have same problem. Where can I get the motor?
@ryantheteknishun9377 14 күн бұрын
Any reputable appliance parts supply store. Samsungs website, possibly eBay. Make sure to get OEM part.
@daddybn12 18 күн бұрын
Just wanted to say thank you! My dryer had the same issue. Wiggled the cords and plugged it back in. Still had the same issue. Unhooked everything again and gave the relay a few finger flicks. Hooked it all up again and it fixed the issue. Save me a ton!!
@ryantheteknishun9377 17 күн бұрын
Excellent, glad it worked
@christab2050 21 күн бұрын
Capacitor mode got it.😂
@SinsFolly 22 күн бұрын
Please help?! 🙏 I can't get the fill, wash & rinse lights to go off so I can go into test mode. I Can put it in test mode, but the first 3 lights don't change. What do I do? Also, the agitator doesn't spin and the lid won't stay locked. It clicks to lock and then immediately unlocks. Trying to avoid a service call.
@ryantheteknishun9377 21 күн бұрын
Do you have your service manual?
@matthwy1 26 күн бұрын
You are the man! Great illustration of how to tackle this!
@jondrew55 26 күн бұрын
Same problem. Water on the floor, only occasionally. Took out the pump and checked for cracks/leaks. Nothing. The chlorine dispenser is a bit different on my model. Was not disconnected, rusted or whatever. Also, not clogged. I found another video where a woman discovered there was a different problem with the choline dispenser. She took the control panel cover off and just disconnected the wire to the valve that controls the water to the dispenser. I'm not sure anyone ever uses bleach anymore anyway. Still have not found the problem since it only happens rarely. I bought a pan for under the washer from Home Depot and stuck it under the washer. It will probably only catch a half gallon or so before it overflows, but that should be plenty.
@ryantheteknishun9377 26 күн бұрын
Good idea! Washers can also simply slosh water out from time to time.
@ABiblicalView 27 күн бұрын
How can I test the lid switch on this same washer? Ours just stopped, and I believe it is the switch.
@ryantheteknishun9377 27 күн бұрын
Unplug unit, unplug lid switch connector and perform continuity test across lid switch terminals
@derekt1260 Ай бұрын
THANKS AND YES I HAVE THIS PROBLEM 👍👍👍
@ladygodiva9294 Ай бұрын
Thanks!
@ryantheteknishun9377 Ай бұрын
Very much appreciated!
@Mikey-Himself Ай бұрын
2 years later this video is still helping people. My relay went out and I was able to solder a replacement in for a total repair price of $8.99. I used an SFK-112DM relay and seems to work just fine. The most difficult part was scraping away the jelly "resin" which is a really weird compound. I was expecting it to be solid like an epoxy resin.
@ryantheteknishun9377 Ай бұрын
Good work!
@wongsutichote Ай бұрын
How did you get the tensioner piece to not rub against the motor I pull the tensioner and when it goes back it touches the rod that is spinning still
@ryantheteknishun9377 Ай бұрын
If you have the correct size belt, and correctly installed, the tensioner arm should not contact the motor pulley shaft.
@jeffreydillon5580 Ай бұрын
Have all same symptoms on Maytag model mvwc6esww1 but there was no clog in pump or hoses and I can turn the motor shaft easily when pump was removed. Any other suggestions. Also was getting a slight burning smell when this first happened. Thanks for any help
@ryantheteknishun9377 Ай бұрын
Check voltage going to motor when trying to start. Check capacitor. Check connections too. If proper voltage and good connections are present, motor is cooked.
@jeffreydillon5580 Ай бұрын
@@ryantheteknishun9377 Ok you don't have a video on how to do that do you?
@ryantheteknishun9377 Ай бұрын
@@jeffreydillon5580sorry, no
@Lilhappylilsad2 Ай бұрын
I really wish thier was a Santa Clause 🧑🏼🔧🧑🏼🎄🧚🏼🥴
@Lilhappylilsad2 Ай бұрын
I figured a motor would be the cheapest way out at this point beings i really dont have money to really do either.. but when I do ..oh! an i was thinking if the motor is siezed from sitting then maybe its not bad i could lubricate it good and un-seize it 🙃 Please if you get a chance to let me know what you recommend me doing ..thanks so much for your video.. Merry Christmas 🎄🎁 to you an yours...may God Bless you all thanks. ..Stan..
@SuperReverbious Ай бұрын
My centennial washer isn't exactly like this, but it was helpful see how to open the top panel and get to the control board. And the rest was also generally useful, albeit not quite specific to my model. thanks!
@stevegunderson2392 Ай бұрын
Thank you for this video found it to be VERY helpful!!! I will never own a washing machine that has a computer in it, generates ERROR CODES, and sends a text message to my phone! People are getting carried away with tech to the point of insanity! THANK YOU!
@ryantheteknishun9377 Ай бұрын
Glad to hear it helped
@Swxnflu Ай бұрын
I love that it’s a bra hook.. as many times she has screamed at me that the washer is broken it has always been something of hers clogging or her having slung jeans to one side 😂
@me2752 Ай бұрын
Great Video !!! Thanks you very much !!!
@ryantheteknishun9377 Ай бұрын
You're welcome!
@duncanyarnell9988 Ай бұрын
Awesome video. New motor fixed the problem. Thanks so much.
@ryantheteknishun9377 Ай бұрын
Happy to help
@randyman8984 2 ай бұрын
Have this exact washer but mine acts like it don't get electricity, like its not even plugged up. No sounds at all. I turned the timer dial and it shows signs of wear cause you can feel it slipping a little. Bad timer?
@ryantheteknishun9377 2 ай бұрын
Possibly. Make sure you have power at the outlet. Then see if you have voltage to the timer.
@joserivera666 2 ай бұрын
Where did you buy the capacitor?
@ryantheteknishun9377 2 ай бұрын
Several parts sites online will carry it. There also may be a parts dealer near you
@BamBam-MSG 2 ай бұрын
You're a gentleman and a scholar! I watched your video and my Amana had the exact same problem. Just finished installing the new capacitor and seems to be working fine. I appreciate ya!
@jessicaguerrero22 2 ай бұрын
Your video saved me! Single Momma and my washer went kaput today. Everyone wanted to charge 100.00 just to look and I don't have the money for it. I watched your video and my daughter and I got to work. We found a scrunchie stuck where your bra wire was found. It took us a lot longer than your video but saved us a lot of money! My only suggestion is to add how to put it back together for those of us that are mechanically challenged 😂. THANK YOU!!
@ryantheteknishun9377 2 ай бұрын
Great job!
@budweiserdude6003 2 ай бұрын
Should i be getting full voltage at the neutral wire?
@ryantheteknishun9377 2 ай бұрын
So you should see a DIFFERENCE of 120VAC between Line and Neutral
@alfredmorency8296 3 ай бұрын
A handkerchief in the pump model MVWC6ESWW1. I replaced the pump because there were water stains near the input shaft. An OEM pump costs less than $40.00.
@raymoskime 3 ай бұрын
Thank you , one of the best informative videos on this dryer right to the point without some crappy music and drawn out nonsense.
@ryantheteknishun9377 3 ай бұрын
I try to keep it concise
@ryanbranch3708 3 ай бұрын
Like another person said, i was checking the motor, and then the relays that you suggested. Neither seemed to be the problem. Plugged everything back in before i quit looking at it for the day... AND IT WORKED!! maybe something a relay was stuck, i dont know, but thankful for now!
@ryantheteknishun9377 3 ай бұрын
Excellent
@FPS_immersion24 3 ай бұрын
Bro saved me $130 minimum to just have them come and "look" not including parts and labor witch i assume would be another $250 ish and all i had to do was wiggle the motor relay.... legend! 🎉🎉
@aldogarcia4063 4 ай бұрын
How to fix banging on sides while spinning drying
@ryantheteknishun9377 4 ай бұрын
Level the machine, wash similar fabrics together, and check your tub springs underneath. Should be 3
@saylorinnovations99 4 ай бұрын
you're a good tech bro, hell of a job
@ryantheteknishun9377 4 ай бұрын
Thank you very much
@beccaraines2259 4 ай бұрын
Great video, my roommate and I'd thought we'd have to get a new one
@ryantheteknishun9377 4 ай бұрын
Thanks, glad it helped
@wearethesaints 4 ай бұрын
Sir you didnt show to put the new capacitor.
@XxalightnerxX 4 ай бұрын
Hi I have one where the lid works fine but it wont continue past agitation but i know the spinning works if i bypass the lock could it be the actuator?
@ryantheteknishun9377 4 ай бұрын
Possibly. Pull the back plate off and watch the actuator for movement during shift time(s). Also, make sure it gets the proper voltage during said times.
@XxalightnerxX 4 ай бұрын
@@ryantheteknishun9377 okay thank you. I mean I could leave it bypassed but I don’t want the lightswitch to break it even more. It’s like it’s not getting signal to completely lock the lid when it goes to spin. It just confuses me that it works either the lightswitch but doesn’t when I have the new one plugged in
@XxalightnerxX 4 ай бұрын
@@ryantheteknishun9377 I’ve also read that it could be the cold water intake as I have hard water. I’m wondering if when the lid is correct it’s not sensing enough flow
@ryantheteknishun9377 4 ай бұрын
@@XxalightnerxXThere should be a paper manual stuck to the inside of the cabinet. It’s awkward to get without taking the top off, but possible. It’ll show you how to do some manual tests to help with diagnostics
@XxalightnerxX 4 ай бұрын
@@ryantheteknishun9377 okay thank you I can try that. I’ll also try checking the drain hose and pressure tube maybe it’s something really small.
@mandonavanava2798 5 ай бұрын
Thank you for the information. I have one like that one now I know what to do. …
@LisaStouffer-z2x 5 ай бұрын
I have this dryer to you know how to make the keeping stop??
@ryantheteknishun9377 5 ай бұрын
If you mean beeping, then no, I do not.
@hitmanhartman 5 ай бұрын
Took ours apart today, didn't find anything stuck in the pump, can't hear a pump hum, does that mean it's a bad motor? All the wiring looks okay, I took the timer apart and cleaned the springs.
@ryantheteknishun9377 5 ай бұрын
When spin is engaged, there is no noise at all? If not, check voltage going to the motor.
@hitmanhartman 5 ай бұрын
@@ryantheteknishun9377 it was the timer, carbon build up on the springs
@hitmanhartman 5 ай бұрын
@@ryantheteknishun9377 I didn't get it back together quite right so I messed with it some more and it started working
@ryantheteknishun9377 5 ай бұрын
@@hitmanhartmangood work!
@randyman8984 2 ай бұрын
@@hitmanhartman was you able to clean them or did you have to buy another timer?
@cbiser12 5 ай бұрын
Aw wtf you left out putting the belt back on.......
@pokefan314 5 ай бұрын
Quality
@mac0372 5 ай бұрын
Having this issue with my Samsung Dryer DVE45T3200W. I haven't opened up the dryer yet, but if you would happen to know the part number of the board (I plan on replacing it) please pass it along. Thanks!
@ryantheteknishun9377 5 ай бұрын
Based on the model number given, the main control board part number is DC92-02527E. Double check it and make sure your version can use it before ordering.
@mac0372 5 ай бұрын
@@ryantheteknishun9377 Thanks! That is the correct part but unfortunetly they are out of stock everywhere. I think Samsung stopped making them. Trying to search for a replacement which will work. One site mentioned part DC92-03611J but I have no idea.
@susanarojas3366 6 ай бұрын
If it don't fill all the way
@ryantheteknishun9377 6 ай бұрын
?
@benjaminjimenez7545 6 ай бұрын
I strongly appreciate your video. After testing the power cord for continuity, I found the problem. Saved me tons of time and money. Thank you!!!
@insepsis 5 ай бұрын
Where was your short?
@macnlinux69 6 ай бұрын
Thanks for sharing very helpful!
@ryantheteknishun9377 6 ай бұрын
If you found this video helpful and possibly saved money, please consider hitting the THANKS button!
@ryantheteknishun9377 6 ай бұрын
If you found this video helpful and possibly saved money, please consider hitting the THANKS button!
@ryantheteknishun9377 6 ай бұрын
If you found this video helpful and possibly saved money, please consider hitting the THANKS button!
@ryantheteknishun9377 6 ай бұрын
If you found this video helpful and possibly saved money, please consider hitting the THANKS button!
@ryantheteknishun9377 6 ай бұрын
If you found this video helpful and possibly saved money, please consider hitting the THANKS button!