Really glad I found this channel. I'm quite good with electronics, but I'm a shit programmer. Your servo video enabled me to get my servos running for my esphome devices. The best tutorial about ESPHome I've seen so far about these less common components, which are actually the coolest of them all. I'd really apreciate a similar video about Stepper motors. I've got a project laying around here for some fully custom blinds with custom components I milled and turned myself. The software integration is the hardest part about that for me. What would be really awesome with this project if it was possile to sync the refresh rate with wled sound reactive.

Blodij briljant :) have you seen c1001 sensor?.. someone should make some super advanced sensor ..you probably wouldn't need any kind swich anymore. But how that sensor could measure quantity of liquids.. well that got my head schraching.

just wasted 4h trying to add this integration and make it work (mostly troubleshoot it). Generally github is your friend but not in this case. More often than not, this integration is not working. You can find the exact same logs, sometimes a vague workaround. Tried them all, it simply can't load - so it can't be set up (not even getting to the authentication part).

What is the location for the ESPhome libs in 2024? The .yaml files are still in config/esphome but not the libs and other build junk

Hello from Ukraine! Thank you very much for your project, this is exactly what I was looking for. I have a huge Ficus in one room, but I decided to decorate this tree. As I thought, on the ESP8266, the flatness of the attenuation occurs with flickering. Therefore, I immediately changed it to ESP32. There, in the code, it is necessary to replace platform: esp8266_pwm with platform: ledc (I am writing this for those who do not know how to code), and replace the GPIO outputs. LEDC has much more gradations of brightness and dimming is very smooth. Thanks again!

Thank you for this! I would _love_ to see more details about how to use a continuous rotation servo within esphome... like how to position it to a fixed location and back again.

thats a good upgrade to the previous one !

There also a 3.3v port on d1 mini can't use this port for power the motor also?

Nice, I love your ESPHome tutorials, can't wait for the next ones.... One question, will the "master" switch turn off the internal fan inside the vindriktning?

BME-280 and ccs-811 on same VCC !? I am confused. According to my information the shown BME-290-Board is for 5V and the ccs-811 for 3.3V ??? Please explain how it can work in combination?

When you say connect the first blue wire to the motor, which one do you mean? The one you soldered first?

I have the same INMP441 digital mic attached and same settings applied but the geq like sound reactive presets are every time flashing with out any sound (the effects are not reactive to sound) even after all same setting like yours

Thanks for the video! Very clear presentation and exactly the info I needed

David is hilarious 🎉🎉

David leave it pal

This is such a backwards step, I really don't understand the point in this change. This change is completely breaking my install, anytime I update node red communication stops between home assistant and node red.

which servo motors would work for this code, no mention of hardware of servo?

there may be one issue - lack of retract action :(

Hi, when I click on the Regulator Module Mini Voltage Reducer, am getting a lot of 12v - 24V. The one you is it a 4.5V to 24" ??

I tried adding the zigbee2mqtt addon to the config folder, but it never shows up in the store. Tried restarting, force refreshing browser, switching to another browser, restarting VM. Another solution would be to download a backup of the addon, uncompress, modify version numbers in the json files, recompress, upload, and restore the backup. I wasn't able to get this to work on Windows, get a 400 error when reuploading.

🎁 For all things 3ATIVE Join our Discord server >>> discord.com/invite/3RbZgvHeJ9

A bit confused here... do you have to add only the modules that you installed manually or do you have to add ALL modules?

I bought an Vindriktning for the exact same reason: converting it into an ESPHome device. However, as soon as I powered one on, I was shocked by how loud the fan was. Absolutely annoying. I ended up not even starting the rebuild.

Thanks very much for posting this video. I intermittently had the greyed out debug node issue a couple of updates ago. So, are you saying in the future we *can't* add new nodes via the pallette manager, or do we still add them via the pallette manager but must *also* update the yaml config to ensure that they are backed up too? Thanks!

I already did everything of your video is so helpfull, but I just want to rotate the motor 360 not just 180 degrees, how can i do that?, thank you for you reply

Hi, great video! I've added some of my manually added notes as you've shown in your video. But after NR-Restart there are gone again. Do I something wrong?

I cannot see a "setup" or "recorder" folder in my file structure on Studio Code Server, only storage, blueprints, custom_components etc - is it hiding somewhere - I can't find any setting to show hidden files etc?? This is on a RPi 4.

What?

Do you run templates? I have a template to evaluate what doors are open and get them shut by announcing them out with Alexa Media Player, before turning on the aircon. But it does not seem to be evaluating the templates anymore. Just reading out the string. So just wondering if you are having any template issues in Node Red? Thanks

Is there anyway of finding out what ones i've added in manual as i know some come built in or do you just need to add all the ones that are in the list?

but.... why? why would they move, or remove the automatic back up functionality?

I was totally gonna do this but with the HomeKit SDK on the ESP board, BUT, the USB-C requirement made it a no-go as mine is hung high up on a wall in my bathroom for maximum coverage. Cool tutorial though!!! 👍🏼

What a great simple project, and so well explained. I have now built three units, one has been modified to include a mq2 sensor, to see if I can get it to auto trigger if the odour gets too much in the toilet.

sir how do you increase the window while editing button card

Great video! Is there any change to make video with VL53L1X for people counter?

Thank you very much! So helpful and right to the point. Much appreciated!

Thanks for that awesome video! Using your tutorial I now have my own Scent-a-Tron! ❤

Hi, thanks for the great video, just one issue, after 3 attempts with different d1's found each time the D1 when programmed would connect to router but once wired up , with 5v and ground reading correct on d1, the blue led would flash briefly but not connect to router. Decided to wire up with connectors and found D3 was the issue. Once disconnected the d1 would connect, then once reconnecte to d3 the d1 worked fine. Any ideas? poss use another pin? D3 is used for the restore to flash

So I had to try it for myself but somehow the D1 Mini won't work after plugging it in.. I hear a high pitched noise but nothing works. It also won't connect to WiFi. I double checked wiring and that al seems fine, I even made a second one but that one also doesn't work. Any clue?

Hi Thanks for the feedback on this as I was struggling to implement BS18D20 sensor, but how to find the address of the sensor? I have 3 sensors and want to know how to find address?

Is it coming soon …😅

Add Ld2410c to the party and we're cooking! 😂

Could someone help me on the script to add a momentary switch along with the slider that is used in the video? I would like to still have to the option to operate with a physical switch.