Great track walk. Amazing the different style of track as compared to what I run on here in the USA. Best of luck DR
@blameusa70824 ай бұрын
Ive never seen 1 video or thread that says "YES, CVDs are much bettert or even they are better really at all. stick to bones.... i guess
@daijoubu45296 ай бұрын
That's not how one uses an o-ring, it would have to sit at the bottom of the threads, what you'll want in this case is a flat washer at the top of the cap if you're not using a blader
@Ripitupfilms8 ай бұрын
That's some crazy dirt
@Ripitupfilms8 ай бұрын
Awesome, thank you for the info!
@jasonrhodes97268 ай бұрын
$500 $500!!!!!! Mark Santa Maria just balanced a tire with a wheel hex, a hex driver and a couple 5mm bearings. Who ever buys one of these, man they saw him coming.
@karlkiernan68637 ай бұрын
You can get one for car wheels for that lol.
@Trabevion9 ай бұрын
Should I use thicker diff fluid with HR fome tiers on 2WD as beginner? Do you have any suggestin which cst to use on a track that looks smiliar to yours?
@jdportwerks67959 ай бұрын
Is this the performa 7 or 3 port motor?
@pandabeastz9 ай бұрын
So the turnbuckle go any way or is there a specific way to put it on?? I’m upgrading from plastic stock
@michaelgravlund919410 ай бұрын
Stærkt kørt.
@oakes4501 Жыл бұрын
Which Flysky Receiver are you using?
@The_Absurdistt Жыл бұрын
No F1 or 12th scale?..... no deal.
@skocngt7457 Жыл бұрын
bästa varvtid?
@kikiautorcman787B Жыл бұрын
Adrien Bertin gave you some secrets... 😁😉👍‼️💯🛢️🏁🏎️🤓🇨🇵
@mgers75 Жыл бұрын
Those look fun as hell as long as someone else is footing the bill!
@Savagefan26 Жыл бұрын
Hallo David, welche Reifen hast du dort gefahren? Sieht für mich nach Hotrace oder TPRO aus... die haben aber keine "black hole" 🤔🙂
@briancarroll6245 Жыл бұрын
Smooth
@TheNoNameRCPodcast Жыл бұрын
Is this the track where NXC will Be ?
@oddballmedia Жыл бұрын
Yes, this is the track for the NXC GP kzbin.info/www/bejne/aqLVlI2DadVrf7c
@viper341 Жыл бұрын
Excellent driving, super smooth and in control, it's a pleasure to watch
@Zottel33 Жыл бұрын
Will it fit for M-Chassis tires , 12mm Hex Adapter, and 50mm Dia. Of the tire?
@LuCKyG931 Жыл бұрын
like real honest? i did not try myself. but. for some reason i am confident that if you glue 1/8 offroad tires. and balance them right away. it can be a different result than if you would have spun the tire once at "race rpm". the whole foam relocates or sets in differently a bit i am certain once spun fast enough. what do you think @david ronnefalk
@drew-ie9xw Жыл бұрын
Shouldn't both halves of the adapter be weighed for calibration?
@ninthislandrc Жыл бұрын
I was going to comment about the same thing. He only weighed half the adapter, thus anything "balanced" on the machine will NOT be properly balanced.
@floodo1 Жыл бұрын
Well done. Looks like a great bit of kit, esp with those wheels
@D70racing Жыл бұрын
Very impressive. Looks like you wouldn’t be able to balance 1/8 truggy?
@teamcamel1755 Жыл бұрын
Thanks for the video 😊
@floodo1 Жыл бұрын
I want to water that track so badly hahah water it and run a bunch of cars on it so it gets a rubber groove haha Euro mixed surface tracks do look like a lot of fun tho
@invisiblespeedrc Жыл бұрын
Watering tracks ruin them
@ZingZingNZ Жыл бұрын
I've joined the Mayo crew! It is so cool. The discord is amazing. I've only introduced myself to the local members. But I'm blown away. I almost don't want to say how good it is! Just the value of being a mayako owner! And how interactive the "movement" is. Once you get an MX8, you will also understand! I may have a chance to try my own beautiful toy race car tomorrow. It will be my 3rd new manufacturer in a year since I started.
@Sammy31Dee Жыл бұрын
Been out the RC game for a now....is Mayako the HB cars under new ownership? Or is Mayako a whole new brand...
@RC_Gubben Жыл бұрын
New brand! HB is still out there
@Sammy31Dee Жыл бұрын
@@RC_Gubben looks pretty dope
@cdb9 Жыл бұрын
JQ Racing became Mayako (more or less).
@charliepetrovich9262 Жыл бұрын
Thank you for sharing and making it so simple others here on put them opposite each other and that makes it confusing to remember and adjust.
@ioandragulescu6063 Жыл бұрын
I have some external shock limiters on my very cheap losi plastic shocks :) Should I remove those before refilling and bleeding? I would think that with those on, I wouldn't be able to push the piston all the way in.
@CraigAndres Жыл бұрын
What motor is in this? Super quick 😊
@CarlosDelaoGunEngraver2 жыл бұрын
where did you get the shock oil?
@tominatorskyview87952 жыл бұрын
Interested in a set of these tires. What are they?
@jasonbrawley39252 жыл бұрын
Go kick some ass man! Good luck
@thisdewd0072 жыл бұрын
Great driving! Makes me miss RC. Sold everything just to catch up on bills. Will be back for sure someday.
@BlastWorrior2 жыл бұрын
holy moly this engine screams like crazy... good runs david
@ZingZingNZ Жыл бұрын
Sounds insane. Keeps building rpm
@rclunatic2 жыл бұрын
Does this tool measure ride height and droop screws?
@huhabi49402 жыл бұрын
Wow~sounds good 👍 If the frame of the picture is 60 frames, that's even better.
@trippjonesiii65662 жыл бұрын
you did the damn thing... way to go...
@BarnaTeTes2 жыл бұрын
BUAAAAAAAAA , SE VE MUY BIEN
@TheNoNameRCPodcast2 жыл бұрын
What a track !! Good luck this weekend `!
@davidbaumann32942 жыл бұрын
Looking smooth, good luck at euros!
@vfxpaattu2 жыл бұрын
u are so good
@caseedwards30172 жыл бұрын
Getting ready to WIN the Euros! 💪
@Harvz782 жыл бұрын
Finally a nitro! All I now is the boring electric.
@vumrfpv2 жыл бұрын
in this video you use wheel foam or rubber Bro. thanks
@chadanderson24862 жыл бұрын
New blah blah blah. New blah blah blah. 1/8 scale is pinnacle, really running outta shit to change. All about setup.
@jerrychan90552 жыл бұрын
What's motor and esc were you using? Turbo or blinky?