Good God did you just push that through with the inducer running and hit the fan blades? Helpful tip to reduce callbacks remove the inducer assembly and thoroughly clean it lord knows what you might find. On an aged unit always give your customers the option to replace the item in question even if you think it will be fine don’t presume to know what the customer wants.

I really have to get one of those loop gooser tools!! Please help

I have a propane furnace in open cell foamed atticed. Would pulling outside air into return be adequate enough for combustible air needed?

Yo man my RV furnace went out last night and its got electricity and gas to it. It blows cold air for a few mins and then goes off. The sale switch is clean but I ordered a new one it should be here Friday. Do you have any idea what it may be? I feel it may be something simple. I ran out of propane over night and now my furnace seems to not ignite. It's trying to ignite I can hear it but it just blows cold.

Cool

Omg that mainboard doesn't look very protected. 😮 obviously water is running down the back of the cabinet yet despite that the pcb is exposed. 🤔

What does one do when they leave home during the winter? Turn the Emergency Heat on as a precaution or take their chances the temperature does not drop into the 20's? Thanks.

You shouldnt need a relay at all though if you just go w to w as long as you are getting 24v to W it will work

thank you for doing this video i have learn a lot from your video please keep doing more video like this again thank you

I run into that on pressure switches a lot, apparently I'm the only tech who thinks to clean the fittings instead of replacing the unit.

Power it on outside

Thx

Now you'll need inverter rated windings on motor or atleast class H.

You are a great teacher thank you

my furnace dont look like that.. it's big, green, and about 70 years old.

My mom had that problem with her Carrier furnace, three Carrier-certified technicians visited, the final visit the owner of the local Carrier company came too (50+ service trucks dealer) Verdict: Furnace is trash, needs a replacement heat exchanger and 42 hours labor to install it - I can't remember their estimate $4k+ So they tried to sell her a brand new furnace, the old furnace was 4 years old at the time.

Thank you for your input on your prefer gauges. Well I’m just looking to upgrade my hand me gauge which I just recently notice they’re not even rated for use for R-410. Luckily for me I only used them half a dozen time for just creating a vacuum during new equipment install . Like I said I have some knowledge of installing several of my own mini split units at my home but now I would like to get into the nitty gritty part of the HVAC tech even if it’s just for myself, like diagnosing and troubleshooting.

Do you have a video on repairing leaks between the plates?

False the easiest one is clogged filter.

Other than a new install Why would the polarity change?

Thanks for the tip, love being able to know how a part works and it’s corks. Can’t wait to find this one out in the field and try it.

Hello best of the best please I wish to have one of those gage

Excellent explination. i will be joining you.

When only the limit switch opens, it is because the opening is small and the roll-outs do not open. The roll-out opens when the opening is larger and the flame comes out. Thanks

Im new in your Chanel I like your videos and I learning alot. BLESS

I wish I could be your apprentice

I have a natural gas space heater. The pilot light keeps going out. The professionals came three different times and they can't fix it. The heater is only a few years old. Is it possible that if too much gas is being used throughout the dwelling that it can suffocate the pilot light?,, cuz that's what I think the problem is. For instance if someone is using the,, cook stove,, another small space heater in the back room, in a bigger furnace in the basement, that blows its heat, through heat ducts throughout the dwelling. I think when all these things are being used and being turned on and off it is snuffing out the pilot light,, on said heater. Anyone have this problem?

Ok, at first was 1.17 and when you clean the hole it was 1.10 , so what are we looking for ?

Daikin LG Mitsubishi take Notes

just great you can Clean The fan and replace The fan motor if you need so Easy that way it's like an old Honda Civic of the mini split this makes technicians Happy😊

Amazing, that's what was wrong with mine,had a small spider in it

Another thing on the pressure switches is that after the first or first couple times heating early in the season. They sit a long time before the next run time, like they run 2 times over the night and then sit all day without running. That humid exhaust environment can get up to the pressure switch and causes it to stick in place when it dries. Like a damp paper towel can stick to the counter once it dries. Tapping on the switch or pulling that tube and very gently puffing in and out on it until the switch clicks back and forth freely works great and frees it up usually. Sometimes they free up on their own eventually just from the inducer pressure cycling in and out on start attempts. Doesn't necessarily need replaced and most we've had do this after freeing them up are still in place and working fine years later.

she left the USA yet?

hello, can you please help me im going crazy,im from europe and i have a fuego 12000btu ac split heat pump,ac doesnt really blows hot air in door unlike my father's ac which is a midea,my ac uses r22 so yes its an old system but i dont get it why it doesnt blow hot air everything seems to work fine defrost works fine fans work fine but the air that comes out its not hot but like lukewarm air if i may say,please help me im freezing in my room😅

Good video Teddy 👍

Ok, i agree this the most easy service call can a tech have to attend. Easy money

So which screw is best?

just push it in -> job security activated

I had this same problem with some white corrosion blocking the inducer port. Now I check that it is clean every October before it gets cold, along with cleaning the flame sensor.

System leaks, the TXV Clogged drain, TXV bad compressor, TXV Dirty filter, TXV Failed marriage, TXV

Quick question so would the manufacturer give you a new coil. Or did you say you are going to charge 2000 garland to install the new one

Done it many a time.

What does it mean when the unit starts the burners after a 2nd attempt of ignition instead of starting up immediately thw first time

what is the proper way to do this with a 3 zone system Thx

Great video for a job most people say can’t be done!!!

It's a ok video not to shabby 😅😂

jb weld...😜

Your one of the best ac technicians Bro keep on pls we are begging you

🇺🇲

Always good to share the basics with people just starting out in the trades. Good job 👍🏼