อยากได้

I believe you attached the rear sight backward. The rear sight should be toward the action not the muzzle. Otherwise very nice job.

To adjust spring tension do you need to disassemble the whole action?? Just picked up a 30-30 takedown from 1908

Brownell sells Firing Pin Assy tool,would eliminate the coins.

một khẩu súng như này thì bảo nhiêu tiền vậy bạn ơi

I have a savage 99 takedown I believe a 1925 model in 300 savage but the barrel has been cut down and seen better days and the stock also. Is the action or rifle as is worth anything or can I get a replacement barrel or a new one made for the rifle ?

Where can a person get a fitted stock and forearm for the 99 Thank you 🙏

Edilson Mônaco Maranhão

Was there a spring in that ejector?

Thank you very much for sharing your recipe. Could you please do a video demonstration of your application on metal? Thanks in advance

I see you skipped the part of where you had to take the bolt to a gunsmith to get the ejector, spring, and pin back in lol 😝😝😝

Downstairs I have a completely disassembled Savage 99 Takedown. It is my next custom rifle project. Now I know how t put it together. Thank you! You do an excellent job!

Nice video, but you really should have the right width screwdrivers to prevent bunging up the slots.

I guess in your eyes you feel this recondtion is finished. From 1-10 , I give it a possible 5, cold blueing is not the way to go, to blotchy, and the stock work I would give it a 3, looks like crap, way to light. I certainly hope the customer did not pay more than $50.00 for this half ass mess. 🤮

Thank you! This video helped me so much with guns I got from my grandparents.

I hope you're not in business as a gunsmith. Cold blueing doesn't die adequate job, your refinished forearm and stock look like crap. I surely wouldn't ever have you work on any of my firearms.🤮

My firing pin is different from the one you worked on. It has a little wish bone shaped spring and I can't figure out how to get it to fit back in place 😮‍💨

How hard was it to reattach the barrel?

Have a .300 featherweight 1899 I noticed that you did not coat with or apply lube to any friction points I know oil can attract dirt but shouldn’t moving parts be lubricated?

Man, this is a great video. I like how you didn't have all of the screws ready to be removed. I'm having trouble with my 1899. The automatic cutoff keeps flying into the bolt's raceway and jams the action.

It’s extremely difficult to follow the steps working with a supersonic speed 👎👎

It’s too damn fast, can you do it in real time please?

Had this on a brand new 700 in 25-06 about 1972 or 1973. No movement at all. Had to return rifle to Remington for a new bolt. Their guess was bluing solution not cleaned and the spring rusted in that blind hole.

i have the single bolt no mag version of this gun as an heirloom... 1948! i was so happy to see this video! great info! TY Target master...

Cho sđt đc ko

Best video on this subject I have been able to find. Thank you

Pretty cool video, thanks.

Thank you to show me how to reassemble the mecanism wow nice explaination.👍

Best cleaning video

Great Savage 99 videos! Thanks! How about one on fixing the dreaded “lever droop” so many 99’s suffer from…..

hey man can i ask what cleaning products u used and process for barrel

​ @southardarms When i get the carrier installed and slotted correctly, the outside "wheel" that im keeping pressure on just spins free inside the receiver and releases all spring tension in the opposite direction... i dont understand whats happening. can you help?

I’m surprised you didn’t do the wood as well

Hello, what a hammer spring size?

When you go to remove the barrel from a takedown use the forearm to remove the barrel.when you take the forearm off on the inside there is a slot place over the hook on the barrel and hold them both together and twist and the barrel will come off easily.

Where can I get the charger for this gun?

😮sounds like rapppper music.verrry eratatin.

I have a Savage 99e. And at 7:45, while trying to follow the video my bolt does not fall out. I was wondering is there a difference because it’s a 99e or am I missing something?

Excelente trabajo. Felicitaciones.

Tape is your friend when trying to loosen screws on the receiver. May keep from scratching the metal when your screwdriver slips. And I would have used a brass polish on the carrier. It not only helps to clean but it also protects.

My grandfather just gave me his old Score Master 511 and its in rough shape.. would you offer this as a service? If so is there a better way for me to contact you if that would be a possibility?

Very powerful love it

Very nice

I have a Savage model 220A that looks very similar to the Stevens in your video. It’s a family heirloom and I’d love to see it restored like this. Can you send me a quote?

I don't have a problem getting down to the rotary thingamajig, However when I got there, the lock screw on the forward end was so screwed up there was no way to get a grip on it, the screw slot is so washed out and obliterated I am concidering drilling it out. Good video though.

Exactly what I was looking for

Make the measurements, sir

Thanks, a solid wack on the screw,bolt or anything threaded will make a 100% difference.

please how can someone get one to buy when he or she is interested

Awesome video!