Why don’t any of these aftermarket bumpers provide similar water and mud protection to the fog lights as the stock plastic bumper?

Good video. Got the dimensions of your gray board stop inside the truckbed?

I've got all for my lumber cut for this project, but it's kind of hard to decipher what board lengths are used for which cart and sections! If you would be able to get me started with the dimensions of the base unit on the rear door cart, I should be able to get going from there. Or if you could throw some of the measurements onto the plans that would be really helpful. Any help is greatly appreciated!

Are the springs necessary to put on, i just have the shocks and i have a stock lift on a 2020 sport s??

How much was the black front fender inserts?

I heard that these smack in to the windows creating constant noise. Can you confirm?

Your video is long and boring and you can’t even explain the step correctly

I bought some Mopar LED takeoffs for my father-in-law's 2018 JL. He doesn't care about the halo, so I'm guessing it should just be a plug-and-play install. Did you need to use a Tazer for the basic headlights (low and high beams) to function correctly with no flicker? UPDATE: Yes, the Jeep needed to be programmed to prevent the OEM LED headlights from flickering.

When you swapped to the rubicon springs did it change you get an alignment after or was it ok?

Good to see a fellow MKE on here!!! 414!

How did you end up getting those clips off of the hook/frame bolts (more specifically than beating on them)? That’s my only hold up is getting the hooks out to change the gold ones from the 392 my bumper came off of and inserting my stock black ones. Thanks!

It looks great! I want to do the same thing!! Rubicon steel bumper and black toe hooks to match my 80th anniversary sport.

hello Matt I have the Mojave trim what offset are the rims you have to have them poke out ?

Is there a way to bypass the lock if the module decides to not work for whatever reason?

Did you have any trouble with the torx screws? Mine were really difficult and some got stripped and stuck. What tool did you use to get them off? Thanks!

In your neck of the woods…. Looks like a Packer G on you Gladiator decal. Where did you find that?

What is the size of the firewall grommet size also do you have a link for this to buy?

I changed my drl to led but on dash it says blinker bulbs out but it does work. Did you have to program anything.

Do they ever fog like Oracle?

Nice. I want to put one on my Mojave….

Looks nice! Had a Sport S and an Altitude package available when I was shopping for a Gladiator both being white. Chose the Altitude package with the black grill, badging and bumper. Looks much better.

I like this device and I am considering it since the alternative won’t work for me - I prefer the bolt keyed hood lock or the mopar key hood lock but I am getting the front trail camera so the camera will be in the way so as far as I have been able to find out this is my only other option without having to change the 2 hood levers outside. So with this being said I have some build quality issues of concern. What if the device breaks how would you get the hood open ? Or the hose melts how could you get the hood open ? Or what if the air hose gets a leak and won’t hold air how would you get it open ?

Question. The 7 bolts for the skid plate assembly. (5) under the that attach to the bumper, (2) that attach to the frame near those brackets. Did those come with the skid plate? Or were those bolts already used on the plastic. Reason I’m asking is I’m finally getting around to this mod but I found a local seller versus getting raped by the dealer. Only issue is he has no hardware for anything including the bumper itself. He just has the full bumper and the skid. But the deal is sweet so don’t wanna pass. The bumper I’m assuming I can use the hardware bolts I have already from my plastic bumper mainly the 4 nuts on each side that attached to the bolts near the tow hooks. But the skid I will have to get the brackets and nutserts for. Just wondering about the other bolts for the skid. I’m assuming I’d have to order those too?

What's the cost ?

Will the latch work with doors off?

Are you able to stick a screwdriver through the front grill mesh and pry the hood latch that is visibly sticking down beyond the bracketey to the right and bypass this whole unit like I am?

Hi great video , are the shocks corner specific as well as the coils I’m doing this and I found the part numbers for the coils online but can not find anything on if the shocks themselves should be specifically located left to right?

Really creative solution! Well done! I am wondering how I could replicate that for a JKU. Hmmmmm

Where did you get 3rd brake like decal (GLADIATOR ) thanks

Thanks for this, I desperately needed to see the inside of this steel bumper. I have been piecing a steel bumper together because the one I bought off FB Marketplace was missing a ton of parts... and the parts diagrams are marginal at best. live and learn...

What size tires are you running?

Very cool! I am a Georgia Bulldog (Class of ‘89) so this idea would work for me as well. I am about to get serious about getting a Gladiator shortly so I have been watching a bunch of videos! I may have to steal this idea! Thanks!

How was the ride with the new suspension?

What mud flaps are those? Trolling all your videos lol just got a gladiator

The spring ends on your replacement are gray.. did you get the diesel take offs or is your jeep a diesel?

Where did you find/get your front license bracket? I've got the Overland JT with plastic bumper.

So I have a question on that plastic trim close out piece you mention that’s right behind the bumper that fills that empty space. I seen you mentioned something about getting a new one for the steel bumper. Not doubting you but I’m wondering why considering it looks exactly the same as mine now I have on my non steel overland bumper. Also I just seen someone on the gladiator forum that did the upgrade as well and mentioned he kept his (although only difference I can think of with his, is that he has a rubicon to start but has one which initially has the regular plastic bumper you had and I have currently) Any reasoning????

Hey I need ur help please I upgraded all my lights on jeep gladiator to oem led just like ura and used tazer mini to flash the system but I’m having issue on drl lights I keep getting message on dash it said their not working they work and they stop I tried to unmarried and try again still sane issue can u please show me how did u flash the system using the tazer mini maybe im doing something wrong, btw I have the 2022 gladiator

Dose this avoids the warranty?

Are the Tires 35"??

I have a 2018 jeep Sahara JL 2.0 turbo I picked up 2021 Jeep gladiator Fox suspension,will it on my Jeep Sahara? if not please explain and if there’s a way I can reach out to you a number of something

Hi thanks for the video! I bought the steel oem online but no hardware. Do you by chance have the part number for those 7 skid plate bolts? Thanks!

I see from the comments that you had to use a Tazer for the Halos. Did you have to use the Tazer for the Fender lights as well, or were they pretty much plug and play?

I just added a Rough Country 2 1/2” leveling kit to my rubicon and it sits perfectly level. I don’t see how the daystar and teraflex are a “leveling kit” when I just put a 2 1/2 inch leveling kit on mine and when I put a level on the bed it sits perfectly level. Just an idea for you to ponder.

I like this cover, I currently carry refrigerants i.e. R410, R134, R22 & my MOPAR hard cover barely closes when I'm carrying a full bed load, with that being said, I would like to see this manufacture rise the support beams or redesign the support beams & lift shocks to the point where it is not flush with the bed line. I am able to adjust a small amount but not weatherproof!!! With materials available today, should be a no brainer to open the top bed cover area, for some breathing room, or design a extended horizontal system that allows the user to extend an inch or so vertically? Also, I would like to see a 1.5 to a 2' cage system for campers can easily toss and tie down cargo on the top of this system. But overall look sweet!!!

I have a Overland, I swapped out the shocks but when I was about to the springs, I had the rubicons and my overland side by side and my overlands were actually about half an inch taller so I left it on. Do you know which rubicon springs are the tallest?

Is this the 2021 model?

Did the last “filler piece” come with the stock plastic bumper?

Go Pack Go! Love the plate!

Great video thank you for sharing it !! Quick question I just traded my JK for a 2021 JL Sahara and want to change the headlights for the HALO LED like yours but I don't have the time to run the cable to the cabin so I hear that the 2021 JL'S come pre wire, how true you think that is? Thank you my friend.