Fill the brake master reservoir 95% full.. That fixed my same service trailer brake issue. Hard to believe but true.
@bought2build13 сағат бұрын
@@shootermcgavin1554 I will definitely give that a shot it can’t hurt! Thank you for the advice and thanks for checking out the channel! 🤟🤟🤟🤟🤟🤟
@russellkeys393720 сағат бұрын
Where do I find the info for your performance kit you mentioned?
@Vivianauxito3 күн бұрын
Another solid video, JWe specifically produce LEDs for auto. Can we invite you to do a review for our product? We have emailed, But not sure if we sent to the right address
@bought2build3 күн бұрын
@@Vivianauxito I will double check my email [email protected] sometimes they go into the spam folder for some Reason I will check it and get back to you tomorrow! Thank you for Reaching out! 🤟🤟👍👍👍
@Vivianauxito3 күн бұрын
@@bought2build I figured the reason out why I failed. The one you left on your page is wrong. NM,I resent another
@bought2build3 күн бұрын
@@Vivianauxito thank you for letting me know i will get that changed as well! And I will check the email and get back to you tomorrow thank you for the support 🤟👍👍👍
@JamesKarren3 күн бұрын
Can’t tell if it’s my head gasket. I get heavy smoke especially when pushing gas pedal. Doesn’t have a sweet smell. Had a misfire code, I changed spark plugs and code went away but still get smoke. Gonna try fuel injectors next. Haven’t noticed any loss of coolant levels.
@bought2build3 күн бұрын
@@JamesKarren what color smoke?
@JamesKarren3 күн бұрын
@@bought2build it’s white smoke. No blue, black or gray coloring.
@gamergeek89334 күн бұрын
I was using diablo sport years ago when they were based out of south florida and not owned by holly and their tunes on turbo cars are outrageous. I think they said this tune brought in about 17 horse power for the 5.3 my car was a turbo 4 cylinder and I got something like 40 hp out of it when it was completely stock. They also have a thing where you can record your cars info and then send it to tuners who can tune the car for you. You would want to do that if you have an intake or exhaust because your car will basically tune out any of those gains.
@bought2build4 күн бұрын
@@gamergeek8933 yes on a turbo car you have a lot more gains because usually you can up the boost pretty easy and that is where the gain comes from And yes absolutely that is called “data logging” you take a log and send it out I don’t do a whole lot with Diablo most my cars are on HP tuners or a stand alone ECU But for a stock simple easy setup these are an option thanks for checking out the video and thanks for the support 🤟🤟🤟👍👍👍👍👍
@tylernabors70065 күн бұрын
anyone have issues not using the reamer? i changed all 8 of mine and did NOT use the reamer. long story short: a guy on facebook commented that he did not use the reamer either but one of his tips broke off after about 40 miles of run time
@russellkeys39376 күн бұрын
Anoder question. How did you grind the adapter sleeve to fit? I have a 16mm shaft. I'm burning through dremel sanding drums and I just burnt out my dremel. Hopefully my new dremel is coming tomorrow, if Amazon is not lying about delivery time. They usually do. 2 days is 4 days or you can add on 2 days to the PROMISED delivery date. Not quite a monopoly but close enough.
@russellkeys39376 күн бұрын
I would like to not burn up my next Dremel so could you explain how you grinded the adapter to fit.
@bought2build6 күн бұрын
@@russellkeys3937 I did exactly what you said I used a dremel with a little barrel sander and just took my time use a rough grit paper and sometimes turning the speed down a little helps you could try a carbide deburer idk how to spell it lol but that may take too much off You could try putting them in a drill instead of the dremel good luck! Lmk how you make out! 🤟🤟🤟👍👍👍👍👍
@russellkeys393722 сағат бұрын
Well I got a nice new Dremel 4300, so that's some consolidation. Anyways you mentioned that you had a performance kit and exhaust, but I can't seem to find that info. Could you let me know what you got?
@trollhunter77646 күн бұрын
Just used it on Dodge Durango 4.7. works great sealed head gasket by second cycle.
@curtismcclellan32387 күн бұрын
Looks great! Good job
@bought2build7 күн бұрын
@@curtismcclellan3238 thank you! I appreciate the support 🤟🤟🤟👍👍👍👍👍
@mimmochiavello605412 күн бұрын
Grazie mille per il video funziona bene grazie
@bought2build12 күн бұрын
@@mimmochiavello6054 de nada gracias por el apoyo 🤟🤟🤟👍👍👍👍
@chakradjuzeus927513 күн бұрын
👍
@russellkeys393714 күн бұрын
Did you just cut down the stock chain or is that a longer one you cut down? Also, do you have a link to that lift you have the bike on? Nice video.
@bought2build14 күн бұрын
@@russellkeys3937 you need a longer chain so I got a longer one and then broke it down And then the lift is just a lawn mower “lift” that I made work with flipped a few things around and used straps and what not mine is from tractor supply but you can find them cheaper www.tractorsupply.com/tsc/product/mojack-hydraulic-mower-lift-550-45004 And thanks I appreciate the support 👍🤟🤟🤟👍👍👍👍
@russellkeys393711 күн бұрын
@@bought2build Thanks for the reply
@bought2build11 күн бұрын
@@russellkeys3937 no problem 🤟🤟👍👍👍👍
@GetShitDone-du6xd16 күн бұрын
Also you cannot add a table Vice clamp to it because of the x pattern
@declanobrien485217 күн бұрын
How are you liking it now? Any other maintenance issues or expensive costs? Is it reliable? Thinking of a 2017 CT6.
@bought2build17 күн бұрын
@@declanobrien4852 so far so good! It has been a good car and a pleasure for daily driver duty’s but still only a little over 50k miles on it but it has never left us stranded or had a non drivable issue! Wish you the best with yours! Thanks for checking out the channel! 🤟🤟🤟👍👍👍👍👍👍
@flashcraft828717 күн бұрын
I couldn't figure out how to get that gear rack into the table. You showed how to do it. Done and thank you.
@bought2build17 күн бұрын
@@flashcraft8287 glad it could help out! Thanks for checking out the channel!!!! 🤟🤟🤟🤟🤟👍👍👍👍
@GetShitDone-du6xd18 күн бұрын
I have the same 10” piece of dog turd. If your not perfectly in your pilot hole, it cant handle it the shaft bends causing rediculous chatter and a pain. A good drill press wont do this. Save your money and buy a different brand
@Fackler9118 күн бұрын
Build the motor and make more power in the future, please
@bought2build18 күн бұрын
@@Fackler91 we may! The whole purpose of this build was to be as cheap as possible I wish it had the original engine in it because I would buy some super cheap rods /pistons and slap them in but being the JDM D15B non vtec idk if I want to bother building this one probably just keeping an eye out for a cheap D16 that I can do that with! Thanks for checking out the videos 🤟🤟👍👍👍👍👍
@Fackler9118 күн бұрын
Do the speedfactory rods and pistons. 300hp in these feels awesome with the bbg dialed in
@bought2build18 күн бұрын
@@Fackler91 I reached out to @speedfactory via email and with this one being the JDM non vtec they were not 100% sure if they would work for me without me taking it all apart to take measurements sadly but if I could find a cheapish D16 preferably a z6 “but not picky” within a couple hours of me I would definitely be interested in picking it up and putting a set of their rods in it I have found some pretty budget 500ish hp setups I could piece together to keep with the theme of this car just need to find one on marketplace to start with and once i do it would go together pretty quick and then we could see what one of these stock JDM d15’s can take 😉 lol 🤟🤟🤟
@WilberWiley18 күн бұрын
Thankyou for the explanation of the tool. I learned alot from your video. Well done.
@bought2build18 күн бұрын
@@WilberWiley very welcome! I am glad it could help! And thank you I really appreciate the support! And knowing someone can get something out of the videos drives me to keep making them 🤟🤟🤟👍👍👍👍👍🤟
@WilberWiley19 күн бұрын
GREAT VIDEO. QUESTION, WHAT IS THE ANGLED PIECE CHAINED TO THE BASE?
@bought2build19 күн бұрын
@@WilberWiley thank you I appreciate the support! 🤟🤟🤟👍👍👍👍 and it is for the tilting table it had a hole under neath you can slide it in to lock the table flat 👍👍👍👍
@user-ow8qt3zp7s19 күн бұрын
[ BCD ] 139.7 ?
@TheYeller722 күн бұрын
Prefer the GTO, just-out-of-wrapper clean candy
@APAKOLYPTIK23 күн бұрын
Thanks for the vid, bro...will be attempting this.
@bought2build23 күн бұрын
@@APAKOLYPTIK good to hear bro! Glad it could help! Thanks for the support! 🤟🤟🤟🤟👍👍👍👍👍👍
@tedstriker75425 күн бұрын
I had the same results with that stuff. It sealed a warped head fast and no leaks since. After the heat cycles, change the oil and filter, since some of it will get in the oil at first and cause engine wear.
@andrewchristmas202626 күн бұрын
Where's the link?
@kame6127 күн бұрын
can't wait to watch this one!
@bought2build27 күн бұрын
@@kame61 appreciate you 🤟🤟🤟👍👍👍👍
@zahranrock482529 күн бұрын
Can we pour it into Reservoir tank Directly??
@bought2build29 күн бұрын
@@zahranrock4825 you would have to read the directions and see I believe they want it to go in the radiator when ever possible but they may have a set of directions for that sorry I couldn’t be of more help thanks for checking out the video 🤟🤟🤟🤟👍👍👍👍
@duanenicpon802411 күн бұрын
They said pour directly into radiator..but you can put in reserve they said but will take longer to seal...I had a smidgen left over after the radiator put rest in reservoir...first cycle tonight will do another tomorrow and let you guys know on my 04 Camry manual 253k miles😊
@bought2build11 күн бұрын
@@duanenicpon8024 Awsome! Keep us posted! 🤟🤟👍👍👍👍
@flashcraftАй бұрын
@ Bought2Build, thanks for showing the assembly. I'm going over to Harbor Freight tomorrow and buying one along with a 2-year extended warranty as it comes with only a 90-day warranty and I don't trust that for power tools. Thanks again.
@bought2buildАй бұрын
@@flashcraft glad it could help! Thanks for checking out the channel i appreciate the support! 🤟🤟🤟👍👍👍
@cmovezz3192Ай бұрын
How are they holding up?
@bought2buildАй бұрын
@@cmovezz3192 so far great knock on wood haven’t had any issues 🤟🤟🤟👍👍👍👍
@cmovezz3192Ай бұрын
@@bought2build how long have u been running em?
@bought2buildАй бұрын
@@cmovezz3192 over a year I got the engine in maybe 2 weeks or so after this video was posted
@cmovezz3192Ай бұрын
@@bought2build good deal thank u for the feedback man
@bought2buildАй бұрын
@@cmovezz3192 no problem thanks for checking out the channel! 🤟🤟🤟🤟👍👍👍👍👍
@user-lr5wg2ev9sАй бұрын
Muy bien explicado, me gusto' y aparte que funciono' muy bien...( google translate ok? ) 🙂👍...
@bought2buildАй бұрын
@@user-lr5wg2ev9s gracias, te agradezco que visites el canal y gracias por el apoyo. 🤟🤟🤟👍👍👍👍👍
@macten7536Ай бұрын
super dope video haven't even finished yet but the amount of detail you add as someone who does electrical at a dealer level i can appreciate the accuracy of what your saying bro keep it up. making me bent my turbo stock d16 build isn't finished yet but now i have an excuse to add meth
@bought2buildАй бұрын
@@macten7536 I’m glad you liked it man thank you for the support! I appreciate it! 🤟🤟🤟👍👍👍👍
@drippy6706Ай бұрын
It would be cheaper to use the windshield washer fluid it is half meth already
@bought2buildАй бұрын
@@drippy6706 I would be willing to give that a try but I couldn’t find any washer fluid with a content over 35ish % At least not around here so straight 91% alcohol was the move thanks for the input 🤟🤟
@drippy6706Ай бұрын
@@bought2build could be different depending on location Personally I buy a 5 gallon can of methonal and then mix it with distilled water myself comes out to 60 dollars total about 6 dollars per fill up
@bought2buildАй бұрын
@@drippy6706 yeah I have been thinking about doing that as well because now I have multiple cars running it so I may give that a shot
@tunerdadtunerdad792723 күн бұрын
Windshield washer fluid has detergents in it and over a little while you have to take the nozzle apart and clean the screens. Not worth it IMO to save a few bucks.
@drippy670623 күн бұрын
@@tunerdadtunerdad7927 its only a problem on a normal methonal systems but not the cheap setup that he is running I doupt it would clog even if it did pretty easy fix since it's in front of the turbo
@dennisedington9906Ай бұрын
Used it in 2011 Prius and it worked same day result Car run better than before
@bought2buildАй бұрын
@@dennisedington9906 that’s awesome! Great to hear! Thanks for checking out the channel! 🤟🤟🤟👍👍👍👍👍
@ScottSerr3 күн бұрын
How is it holding up? I might try it on my 2010.
@bought2build3 күн бұрын
@@ScottSerr wasnt my truck but my buddy sold it a while back it after driving it for a few months an hour each way every day with no issues 👍👍🤟🤟🤟🤟
@danieljoseph905Ай бұрын
great video thank you!
@bought2build23 күн бұрын
Glad it could help!
@aaronosentoski8113Ай бұрын
Hey I ended up doing this because I was replacing the rack and the pump might as well do the lines and a new cooler I’ve noticed the steering is a lot tighter now
@bought2buildАй бұрын
@@aaronosentoski8113 awesome glad to hear! Thanks for checking out the channel! 🤟🤟🤟🤟👍👍👍👍
@hoodrichpabloronАй бұрын
Awesome vid brother
@bought2build23 күн бұрын
Thank you I appreciate the support! 🤟🤟👍👍👍
@nimster64Ай бұрын
How long did it work for?
@Juicey3887Ай бұрын
How in the world did you get the Allen key in? I got the long ones also can’t get them lined up.
@bought2buildАй бұрын
@@Juicey3887 it is a pain but rotate the wheels and drive shaft as you go I did 1 or 2 at a time and then would rotate the wheels a little hope this helps thanks for checking out the channel 🤟🤟🤟🤟👍👍👍👍
@Juicey3887Ай бұрын
@@bought2build thank you for the quick response. I tried everything didn’t know if you ended up tapping in the socket with a hammer or not don’t want to mess these bolts bolts up
@bought2buildАй бұрын
@@Juicey3887 no problem when I see them I try to reply 🤟 and no I didn’t hit them in I just used the long Allen sockets and rotated the drive shaft until I could a good spot where I could get on them 1 at a time it’s not fun it’s time consuming but is possible If you really can’t get it get the Allen sockets with the ball style tip
@20-ryszardkensakti65Ай бұрын
Subscribed 🎉
@yeeyee6190Ай бұрын
What were your settings on the welder
@bryce6870Ай бұрын
Great A-Z review got see see first hand how this sander works! I will add this to my list to buy!
@bought2buildАй бұрын
@@bryce6870 glad you liked it thanks for checking out the channel 🤟🤟🤟👍👍👍👍
@bryce6870Ай бұрын
Straight to the point a very complete review from box to drilling different types of metal and bit size. Great review. Prospect buyer for very light usage here.
@bought2build23 күн бұрын
Thank you for the support! 🤟🤟🤟👍👍👍
@Bajablast6996Ай бұрын
Glad to be first, fire build so far
@bought2buildАй бұрын
@@Bajablast6996 thank you! 🤟 I appreciate the support 🤟🤟🤟👍👍👍👍👍
@user-fq6vx7uq9mАй бұрын
I put it in my engine still ran hot
@RaceRedFairmontАй бұрын
Westgate is the best speed shop i have been to and blessed to have them locally . Milton does a great job and it makes it easier with our 3 cars we race
@bought2buildАй бұрын
@@RaceRedFairmont it is an awesome shop I really enjoy when I am able to make it out! I wish I it was local! Thanks for checking out the video 🤟🤟🤟👍👍👍👍
@bruceheddinger1592Ай бұрын
What led fog light kit should I use for my 20 gmc terrain
@bought2buildАй бұрын
@@bruceheddinger1592 the one linked in the video description should work but I would get LED bulbs for it 👍👍
@jesse_-Ай бұрын
These cars are fast, but they are not very good looking. They look like a Pontic Grand am. I’d rather go for something with the looks that match the power.
@bought2buildАй бұрын
@@jesse_- I can’t argue that they are the best looking cars haha but I do love mine comfortable And fun to drive and personally when I have the drag pack on it I like How it looks but everyone has their own taste! Thanks for the input! 🤟🤟🤟🤟🤟👍👍👍👍
@littleAE86thatcouldАй бұрын
I also own a 04 GTO same color. Aside from how these cars look it is nice to drive knowing i wont see the same chassis with a V6.
@bought2buildАй бұрын
@@littleAE86thatcould very true
@TJE-s5jАй бұрын
Hopefully see you at Moroso soon.
@bought2buildАй бұрын
@@TJE-s5j yeah for sure I’ve just been so busy but I was saying today I’ve gotta make some time to get it out and do some stuff 🤟🤟🤟
@Georges502Ай бұрын
Hood souns better, if you put a nice muffler at the end it would definitely sound better in my opinion
@bought2buildАй бұрын
Thanks for the input! Thanks for checking out the channel! 🤟🤟🤟🤟🤟🤟
@orionmontgomery238Ай бұрын
Yeah the oil burn is the return and the pcv
@bought2buildАй бұрын
@@orionmontgomery238 totally possible I just have a hard time believing that a -10 line that is almost perfectly Straight down into the pan is too small for a -4 feed that has a restrictor and the the pcv it has -10 fittings and line at the back of the block going to catch can but possible I guess thanks for checking out the channel 🤟🤟🤟🤟👍👍👍
@antoniopena3254Ай бұрын
You can actually stack the angle iron 2at a time on the band saw to cut it. Just make sure to keep an eye on it.
@bought2buildАй бұрын
@@antoniopena3254 ahhh that’s actually a great time saving idea! Thanks I’ll have to try it! Thanks for checking out the channel I appreciate the support! 🤟🤟🤟🤟🤟👍👍👍👍👍👍👍