Thanks for this video it has been a huge help. One question, I am having trouble unplugging the module. I am pressing on the two tabs and pulling but it isn't coming out. Any advice would be much appreciated.

my brother! thank you so much this helped me after an hour trying automode and AP mode without any success. Had to do this twice but it definitely worked!!!!!!!!!!

Thanks bro, you really helped me out.... I had spent hours trying to reset this switch and couldn't figure out what's wrong with it

You’re a genius! I’ve been trying to reset a few of the switches with no success. There’s no information about resetting it the way you showed which actually worked! Thanks!!!😊

Dam.. mine just wont go into pairing mode.. Just noticed today.. its the only one of 8 that disconnected.. its about 20 feet from the router (in the same room) but i feel thats irrelevant since it wont even go into paing mode. I've tried breaker and the air gap switch but nothing i do will get the light to blink. It does blink for a few seconds when i pull the air gap switch. But then when i hold down the power button, the light on the switch turns off, and then back on but doesnt start blinking. Any ideas? I'm assuming it just died.. but that really worries me since i have so many more.. i mean at least the light still works and dims etc. But this is kind of frustrating, i feel like i cant be the only person this has happened to. Theyve been working for at least 6+ months (cant really remember when i put these in, but its been a while)

Thx man and what about the camera before it was work normal but now doesn't work i changed the internet and i put new user an pass evrry thing good but itsn't work

Link for the grommet?

This makes wary of buying these... The switches don't seem resilient

Does this work on the one wheel pint x?

OHHHHH MG!!!!!! This could have saved my sanity a week ago! I've gone bananas for going on a week after countless repeated power outages here in Pittsburgh, they will happen here for no reason, you feel like you're living in Lagos! Seriously, one of my good friends lived there and nightly they'd lose power, fine but this is Pittsburgh, PA, USA 🙄 without storms or high demand you WILL randomly lose power (super annoying!). Now, i do all the tech, IT, electrical, blah blah blah stuff around the house so I've aged 10 years this week and you're right, the Feit website and app is useless in explaining it demonstrating just how to use this "air gap switch" i was just about to go take pliers to yank it outta the switch if it hadn't been for this video!!!! I can't thank you ENOUGH for this very helpful and descriptive video, hope you have a most blessed weekend ❤ thank you, grazie, danke, domo arigato, gracias, ta, merci, obrigada❣️

Where can i get that case for airtag

Thank you Timmy!!! I love my V2 AirTag holder! My GTS feels way more secure

Omg! I wish I had searched this on KZbin a month ago, so much frustration for the last several weeks. Thank you so much!

THANK YOU!!! I spent soooo much time trying to figure this out. SO frustrating! I appreciate this greatly!

Thanks so much! Planned obsolescence until someone like you investigates.

WOW - SOLVED MY PROBLEM: During a recent storm, the power was flickering for a while and the next day I noticed that most (7/10) of my home Feit LED dimmer switches would only go on/off and would NOT dim anymore. All were connected on Wi-Fi and changing the settings did nothing. After watching this video, I opened and closed the 'air gap' on every dimmer and like magic everything was working correctly. The 'air gap' switch was easily accessible using my fingernail and without having to remove any switch plates. THANK YOU :)

You are a genius

You read my mind about "everyone goes to Costco". lol

Great, it works . Thanks for the solution

Subscribed! Thank you for this info! My Feit smart dimmer switch has been off my network for almost a year. I tried making it blink to start pairing but it would only blink once. When I saw your video I thought to myself that's one thing I never tried and didn't even know about the air gap switch. After I pulled the tab to reset the unit, it shut off all the lights, then the unit's power light started blinking and it stopped. I was about to start pairing it with the Feit app but then I decided to try turning it off/on with Google/Alexa voice command(s) and the Feit App and it just worked! Thank you! I was about to take the switch out and put a new Feit smart dimmer switch in. Thanks again.

I have had a pair of switches offline for about a year and a half due to this issue. Thank you so much for posting this video. I had spent hours with their tech support with them telling me my wireless network was the issue when it was just that silly little switch at the bottom. Awesome work figuring this out!

Thank you soooo much!!

Do the fang version come with fang bumper

I had the same problem after some of the power outages. I used to delete the devices and added them back from the app. It's a hassle. However, several months ago, I was not able to reconnect them. Your video works and has saved me a lot of agony. I don't even need to do the delete and add steps. Thanks.

Friend, I love these switches. Had great success. Always struggle finding the right double gang wall plate. What size are you using as yours looks great.

This is not working for me. I basically had My dimmer working and then lost power. When the power came back on it was off the network. But it still turns the light on and off manually. When I hold the switch down for 10 seconds it never blinks. It just turns on the light. If I do the air gap, that doesn't work either that just either turns it off or on. I cannot get it to blink. Any other ideas?

Thank you sir you are the master, mine did not dim no more, and it worked ❤

how thick is it

The clips are now labeled! 16 pin and 6 pin

You should use a modified airtag that's had it speaker disabled or a DIY airtag so that the thief can't easily find the airtag by making it sound off...

Thank you so much just installed it !

I have a different problem with this switch. It connects fine to WiFi and works with Alexa. The problem is I replaced the switch with an 3-way switch. The on-off switch opposite the smart dimmer switch does not turn on or off the lights. The red wire YL/RD is connected with the T2 (red wire) that connects to a pole on the remote switch. I submitted this to Feit Electric.

Over engineered garbage

Nice video! Thanks . You need S M Zeus!!

could probably also turn circuit breaker off which "powers off device" for real. ..my guess its what "air gap" does "air GAP between power connection?

Oh my goodness that was like magic! I have been struggling with my switches after the last power outage. Brilliant! Thank you so much!

Where we can get this tool?

I really appreciate your video. Happy holidays to everyone!

Excellent, thanks, I had no idea. A power blip the other day, couldn't get my switch into pairing mode or anything. This worked immediately. THANKS.

THANK YOU!!! I've been trying to troubleshoot this dimmer switch for hours now and this immediately resolved it.

Thank you! This saved me enormous frustration with switches not being able to be reconnected after a power blip in the house. I can’t believe Feit doesn’t mention this approach!

Why did you put 2 of them in it? Are you hoping if someone gets to one they won’t notice the other?

yes, i am one of those who goes to Costco and had my house fitted with a bunch of these switches! super helpful, thanks!

Just installed. Great video and great product man. Thanks.

I have an apple air tag in my Onewheel. Literally just taped to the under side of the footpad. Works great and is pretty inexpensive.

Is this a better tracking solution compare to Apple AirTag?

Why?

So what is it?🤷🏻‍♂️

The video was very helpful because of the air gap switch. However, even with that I had difficulty because I had another dimmer right next to it. So I guess it is better to pull air gaps for all the Fiet dimmers so that you can connect one at a time. Thanks again for the helpful video.

It works thank you for those who it’s not working make shure you’re on 2.4 wifi