Costco Feit Smart Dimmer Switch Reset

[@nelsonperez6224]

You’re a genius! I’ve been trying to reset a few of the switches with no success. There’s no information about resetting it the way you showed which actually worked! Thanks!!!😊

[@gaylwilson6663]

Thanks so much! Planned obsolescence until someone like you investigates.

[@techturret]

Happy this helped you:)

[@Steveox11]

WOW - SOLVED MY PROBLEM: During a recent storm, the power was flickering for a while and the next day I noticed that most (7/10) of my home Feit LED dimmer switches would only go on/off and would NOT dim anymore. All were connected on Wi-Fi and changing the settings did nothing. After watching this video, I opened and closed the 'air gap' on every dimmer and like magic everything was working correctly. The 'air gap' switch was easily accessible using my fingernail and without having to remove any switch plates. THANK YOU :)

[@techturret]

Glad to have helped!

[@PersianNavid]

Omg! I wish I had searched this on KZbin a month ago, so much frustration for the last several weeks. Thank you so much!

[@trinariverarealestate]

THANK YOU!!! I spent soooo much time trying to figure this out. SO frustrating! I appreciate this greatly!

[@margaritam8140]

OHHHHH MG!!!!!! This could have saved my sanity a week ago! I've gone bananas for going on a week after countless repeated power outages here in Pittsburgh, they will happen here for no reason, you feel like you're living in Lagos! Seriously, one of my good friends lived there and nightly they'd lose power, fine but this is Pittsburgh, PA, USA 🙄 without storms or high demand you WILL randomly lose power (super annoying!). Now, i do all the tech, IT, electrical, blah blah blah stuff around the house so I've aged 10 years this week and you're right, the Feit website and app is useless in explaining it demonstrating just how to use this "air gap switch" i was just about to go take pliers to yank it outta the switch if it hadn't been for this video!!!! I can't thank you ENOUGH for this very helpful and descriptive video, hope you have a most blessed weekend ❤ thank you, grazie, danke, domo arigato, gracias, ta, merci, obrigada❣️

[@tzarza]

So happy this helped you!

[@paragbangad]

This is very helpful! I have been searching FEIT site but did not find anything useful.

[@StanleyC-vx5jz]

I had the same problem after some of the power outages. I used to delete the devices and added them back from the app. It's a hassle. However, several months ago, I was not able to reconnect them. Your video works and has saved me a lot of agony. I don't even need to do the delete and add steps. Thanks.

[@delciusa]

Thank you sir you are the master, mine did not dim no more, and it worked ❤

[@camrytoyo]

I was about to return to costco and decided to try youtube... and you saved me a trip.. thank you

[@garyhgaryh]

Subscribed! Thank you for this info! My Feit smart dimmer switch has been off my network for almost a year. I tried making it blink to start pairing but it would only blink once. When I saw your video I thought to myself that's one thing I never tried and didn't even know about the air gap switch. After I pulled the tab to reset the unit, it shut off all the lights, then the unit's power light started blinking and it stopped. I was about to start pairing it with the Feit app but then I decided to try turning it off/on with Google/Alexa voice command(s) and the Feit App and it just worked! Thank you! I was about to take the switch out and put a new Feit smart dimmer switch in. Thanks again.

[@Xerom]

I have had a pair of switches offline for about a year and a half due to this issue. Thank you so much for posting this video. I had spent hours with their tech support with them telling me my wireless network was the issue when it was just that silly little switch at the bottom. Awesome work figuring this out!

[@melissalaney]

Oh my goodness that was like magic! I have been struggling with my switches after the last power outage. Brilliant! Thank you so much!

[@stephensoisson9261]

Thank you! This saved me enormous frustration with switches not being able to be reconnected after a power blip in the house. I can’t believe Feit doesn’t mention this approach!

[@techturret]

I was so frustrated with this, i figured thousands of others would be too. I was right! Glad I could help.

[@DoNnEgRoW]

my brother! thank you so much this helped me after an hour trying automode and AP mode without any success. Had to do this twice but it definitely worked!!!!!!!!!!

[@BruceKupper]

This worked! Can't believe Feit has not commented on this problem. Thanks!

[@techturret]

Glad it helped! Tell me about it. They have other stuff plublished to youtube. They must like it when consumers are the ones who do their work for them. I spent all day trying to fix the problem that happened to all three of mine. 3 out of 3 are bad? Noway! There had to be a simple fix.

[@robertportik210]

yes, i am one of those who goes to Costco and had my house fitted with a bunch of these switches! super helpful, thanks!

[@eddiemiri4390]

I really appreciate your video. Happy holidays to everyone!

[@tzarza]

Glad this helped you!

[@techturret]

Glad I could help!

[@AkashS360]

Thanks for this, saved a trip to Costco to return the switch, and an annoying reinstallation for a new one.

[@wieneryron]

Excellent, thanks, I had no idea. A power blip the other day, couldn't get my switch into pairing mode or anything. This worked immediately. THANKS.

[@techturret]

Awesome! Glad it helped.

[@nstevic01]

THANK YOU!!! I've been trying to troubleshoot this dimmer switch for hours now and this immediately resolved it.

[@techturret]

Happy this helped you!

[@riquetez]

Thank you so so much! Even with your tip I struggled as the EZ setup was not working, and the only alternative after a few tries was the AP mode that you can manually select within the Application. Finally, it is important to ensure a brand new install of the app is on your iPhone. I tried between two different iPhones and the setup worked on the one with the new install, even the other one was updated. Bad documentation from Feit that may result in a lot of returns to Costco. Thank you, Thank you thank you!

[@nandamfamily8108]

Great, it works . Thanks for the solution

[@tzarza]

Happy it helped you too. Thanks for watching.

[@marcchartrand9949]

It works thank you for those who it’s not working make shure you’re on 2.4 wifi

[@JalilShaikh]

The video was very helpful because of the air gap switch. However, even with that I had difficulty because I had another dimmer right next to it. So I guess it is better to pull air gaps for all the Fiet dimmers so that you can connect one at a time. Thanks again for the helpful video.

[@tellshami]

Awesome...i tried for hours today....not resetting at all. wanted to call Feit customer support tomorrow but glad I came across your video - first video to play after search. For me I did not have to reset completely - blinking slowly that is. As soon as I pulled that small switch at bottom - it sort of reset and Smart Life app caught it. Thank you so much !!

[@toddshank8724]

Thanks, this worked for me too. I tried several times without luck, be sure to check your WiFi signal strength, especially if you are using a mesh system, my closest router was on but not functioning so my cell phone had a good enough 2.4Ghz signal but the smart switch did not. I reset the switch, then tapped the button for that switch in the Feit app, and it did the rest for me.

[@erwin4236]

Friend, I love these switches. Had great success. Always struggle finding the right double gang wall plate. What size are you using as yours looks great.

[@tzarza]

Not sure. Came with house.😊

[@fmesj]

This video really helps me in solving the wifi issue and power off completely the smart dimmer switch i bought in Costco. The Feit customer support is sucks.Another problem i encountered with this switch is when i turn off my chandelier LED light remain lighted at 1% dim light...in order to power off completely you need to pull that little plastic below to power off.The design of this switch has problem that needs a recall.Feit better step up.

[@EweToobUsername]

This was a lifesaver, thank you. Pro-tip - use “screwless” wall plate covers with these (and other similar rebranded Tuya switches) - I was able to get the air gap switch without tools since the frame that the switch mounts in left room to grab the nubby for the air gap switch.

[@lsimon2342]

Do they have such a wall plate for a two gang installation like the one above?

Thank you soooo much!!

[@AltafKapadia]

Thanks bro, you really helped me out.... I had spent hours trying to reset this switch and couldn't figure out what's wrong with it

[@ricobhi]

Thank you SO much for making this video for us. Feit really should be ashamed for not updating their own procedures after your video has been out for 10 months so far! Ridiculous.

[@chris319r]

You are the best! Thank you.

[@bakerphotography]

Dude you are the best!! What kind of dumbass company doesn't mention this in ANY of their documentation.

[@gustmeyer551]

I have a different problem with this switch. It connects fine to WiFi and works with Alexa. The problem is I replaced the switch with an 3-way switch. The on-off switch opposite the smart dimmer switch does not turn on or off the lights. The red wire YL/RD is connected with the T2 (red wire) that connects to a pole on the remote switch. I submitted this to Feit Electric.

[@ozoner4]

you mean on/off switch for dimmer switch not air gap switch . since it shuts down power to entire controller wouldn't turning off breaker for that light circuit do same thing ?

[@techturret]

I don’t know why they call it an Air gap switch, but essentially an on/off. The breaker likely would do the same thing but this method is localized to just the switch not the whole circuit.

[@schen9]

thanks for the video, i was hopeful but for some reason it didn't resolve my issue. it just won't go into the slow blinking mode! I'll keep trying, one of the comments said it eventually worked after a few tries

[@schen9]

Got it to work after a couple of tries, but still couldn’t get it connect using the AP mode but the air gap reset helped me to connect using the default mode! Thank you!

[@ryanfernando8330]

thanks so much, the electricity went out yesterday and it just wasn't working. I'm kind of a lazy ass and I've gotten so used to saying "alexa, turn off the lights"

[@HexapodMaster]

You are a genius

[@ChefHammoud]

Thx man and what about the camera before it was work normal but now doesn't work i changed the internet and i put new user an pass evrry thing good but itsn't work

[@jeffolvera]

Awesome! You are the man. Thank you.

[@techturret]

Glad this helped.

[@andrep1174]

Thanks ☺️, and this is how you restart your feit smart switch when ot fails to connect to wifi, cool

[@333stan333]

Thank you Thank you. Brilliant solution. Thanks so much.

[@dwaynestinson]

Have you attempted to install these dimmer switches on the same circuit? For a 3 way application. I can't seem to get it going though the instructions say its possible 😕 only one of my switches actually works the light. The other just illuminates as if its controlling something but does nothing

[@techturret]

I still need to do that actually. Haven’t tried to set it up as a three way switch yet. Hope you figured it out!

[@dwaynestinson]

Figured it out. I reset it a few times then it worked. Thanks for the follow up.

[@SP-ww8hv]

Dam.. mine just wont go into pairing mode.. Just noticed today.. its the only one of 8 that disconnected.. its about 20 feet from the router (in the same room) but i feel thats irrelevant since it wont even go into paing mode. I've tried breaker and the air gap switch but nothing i do will get the light to blink. It does blink for a few seconds when i pull the air gap switch. But then when i hold down the power button, the light on the switch turns off, and then back on but doesnt start blinking. Any ideas? I'm assuming it just died.. but that really worries me since i have so many more.. i mean at least the light still works and dims etc. But this is kind of frustrating, i feel like i cant be the only person this has happened to. Theyve been working for at least 6+ months (cant really remember when i put these in, but its been a while)

[@ivantsang2203]

Have you had problems with the lights not turning off?? Even if the switch is off?

[@AngeloMastrangelo]

Most helpful!

[@dougiequick1]

could probably also turn circuit breaker off which "powers off device" for real. ..my guess its what "air gap" does "air GAP between power connection?

[@grantguitarcovers]

This is not working for me. I basically had My dimmer working and then lost power. When the power came back on it was off the network. But it still turns the light on and off manually. When I hold the switch down for 10 seconds it never blinks. It just turns on the light. If I do the air gap, that doesn't work either that just either turns it off or on. I cannot get it to blink. Any other ideas?

[@cue03]

Do you have to do that every time there is a power failure? Do you need to do that on each and every Feit smart switch?

[@techturret]

Hope not. But there have been a lot of power failures in cali lately so I wanted to see if the video could help out whomever It could. Is that what you’ve experienced? Having to reset after every power failure?

[@SpencerofSussexHall]

I've had these switches in service for well over a year and in spite of numerous power outages, I haven't experienced this problem - until a few days ago. Thank you ​ @TECHTURRET PRO . I've been struggling to find a solution and yours works!

[@jamesjoseph8700]

Great,!! thks for information

[@maxgrey1487]

Thank you!

[@techturret]

You’re welcome!

[@angie1865]

It won’t turn on just installed how do I get this going

[@AlexTEK2]

Thank you!!!!

[@jeetkohli]

Have you noticed that it makes noise when you dim the light and on 100% it doesnt?

[@techturret]

On the switch or lights? I’ve not noticed that on the switches I have. Does this happen on all of yours?

[@shawnclark9050]

Right, not mentioned, and over an hour wasted on it. Was about to give up.

[@techturret]

Yeah, me too. And i didn’t so I had to give hope. Haha! Hope it helped.

[@goldilocksfhh9670]

I just got these installed by my electrician & I love them. However my ceiling fan doesn’t work now. He blamed it on the fan that worked perfectly. He checked & there’s still power going to the fan. Anyone, suggestions??

[@tzarza]

I’m not sure how well these type of switches would work well with a fan since its a dimmer switch. Might consider using it elsewhere in the house.

[@goldilocksfhh9670]

@@tzarza thanks will do.

[@tzarza]

You may just want to use bond which is designed for smart home use with Ceiling fans i just installed 4 bond enabled fans with wifi and they seem to be pretty reliable. The thing is with the Fans they require certain voltage and not sure if the dimmer can provide the right amount to make the motor move.

[@goldilocksfhh9670]

@@tzarza I will def let the electrician know about that. Thanks so much.

[@mdkaplanm]

All you have to do is pull air gap. Push in. Connect with app. App won’t acknowledge connection but as soon as light stops flashing you are connected. Just hit cancel. I have 35 of these in my house. After power flash some disconnected and I reconnected. But I deleted 2 dimmers and I cannot reconnect them. Annoying. Not sure how to factory reset them.

[@tzarza]

True. I’ve noticed they function different now, and easier to connect after pulling the airgap switch and popping it back in. Perhaps a firmware update has made them easier to reset. Hopefully those 2 aren’t bad. Tried holding down the button to perform a factory reset?

[@ThisIsReMarkable]

This makes wary of buying these... The switches don't seem resilient