It says my JL five is not compatible with windows 10
@BrendaDavis-196310 күн бұрын
Mine still won’t connect Lightburn can’t find it either
@cricutcreationswithtory11 күн бұрын
Do you have a video on how to calibrate the laser w lasergrbl. I just got one and formatted the flash drive before looking on it.
@horatiorp12 күн бұрын
Thank you so much. In my case, the buttons were there but didn't turn the laser on. it turns out the code was wrong.
@pdep14 күн бұрын
Would be nice to have detailed info on how to align the wood under the correct point [left & right etc} for starting the engrave/cut. Maybe next time?
@user-aminul0197915 күн бұрын
I need to old version grbl, plz sent me
@user-aminul0197915 күн бұрын
windows 7 dose nto support neu version grbl
@irvinecattleranch15 күн бұрын
I have looked for this help for over a year! Glad I finally found it! THANK YOU!!!😀
@kernow-alan16 күн бұрын
Hey, thank you, I'm with the Atom stack a20 pro. The setting for the $30 was on 255. As per your guide, It's now on 1000 and cuts like butter. Before this, it was so lame.
@patgray540216 күн бұрын
Why does my lasergrbl not look like this? Mine is a grid with 4 quadrants, not a blank tan canvas.
@minimalistqueen299216 күн бұрын
Cause we got the upgraded version! I wish they would give us a tutorial on how to use the newest one. I just got this printer yesterday! I’m stressed
@faustoart23 күн бұрын
very good tutorial, I followed it, I shorted the electriciby of the full building (yet dont understand how I did it) but no its working nicely, so thank you!
@czowiekznikad206226 күн бұрын
Hi, do you know why I can't upload any other config file with changes using fluidterm as you do here 27:55 ? I have to erase all flash memory and install everything once again even when I did some little mistake in .yaml. Im getting Return -2.
@brakthehun25 күн бұрын
@@czowiekznikad2062 I haven't had that issue. Are you making sure to select the right port in Fluid Terminal??
@czowiekznikad206225 күн бұрын
@@brakthehun yeah, I've selected the right COM port. I installed and uploaded older version of FluidNC (3.5.0), the same you have used and I got rid of this issue. However, I'll use an Arduino Uno to finish the project as I am using standard ESP32 DEVKIT V1 and do not have MKS DLC32. I've tried to use TXS0108E level shifters to send the signal to DM542 stepper driver, but my stepper motors are going crazy, they didn't want to move even when they were supposed to, I've erased everything from ESP32 once again and uploaded some simple code to control only one motor (X gantry), just to move and be still. And guess what happend :D All motors (other Y and Z gantry) which were not supposed to move had worked as I described in code along with the specific one I've programmed and wanted to move. The stepper motors operation is unstable, I don't know what it can be, maybe it's my skill issue in soldering as I'm doing the project on a prototype board, or some ESP32 soft problems, or just bad hardware connection. Despite all of my issues, your guide helped me a lot during the process of setting up the firmware on ESP32, everything worked perfectly, I've even had an internet connection established :D
@barryleeder902927 күн бұрын
Can u tell me what settings for mirror I got a olm3 10w and trying to do a test card
@pipinval28 күн бұрын
Everything is going well, until I put on "$radio" . Get error. Anyone knows how to solve this?
@Glasairman29 күн бұрын
Like you enclosure very much, Do you have a cut list? Looks like alu profile 2020 Hammerhead 5, correct? (In German we say Nut = Groove)
@md.asrafulislam1436Ай бұрын
How to set power max and powre min, only power max comes in my apps
@brakthehunАй бұрын
@@md.asrafulislam1436 go to the console and ask it. Type in $$ and hit enter. Register 30 ($30) will tell you the value to fire the laser at max power.
@777smitty4Ай бұрын
I abandoned ugs and went to lazergrbl same issue if I hit home it gives error code pin9 x limit pin10 y limit and pin 12 is torch on also can’t get it to come on
@brakthehunАй бұрын
@@777smitty4 disable hard stops?? Plasma torches can be very noisy electrically.
@777smitty4Ай бұрын
At this point torch is not connected only the optical relay just for testing
@richardbrown2290Ай бұрын
Great video. Could you do a add-on on LaserGRBL version 7.X.X. There seems to be a lot of changes between 3.x.x and 7.x.x. Thanks
@brakthehunАй бұрын
@@richardbrown2290 It is coming!!
@kernowcoinringscornishcoin3999Ай бұрын
Hi when using laser grbl when I attempt to jog the y axsis the x axsis moves instead any ideas why this would happen?
@brakthehunАй бұрын
@@kernowcoinringscornishcoin3999 what machine?? Is it different with other gcode senders???
@kernowcoinringscornishcoin3999Ай бұрын
@@brakthehun atomstack p7 only just set up machine yesterday and using laser grbl
@kernowcoinringscornishcoin3999Ай бұрын
@@brakthehun would the machine jog in accordance with the orientation of the picture I'm carving
@brakthehunАй бұрын
@@kernowcoinringscornishcoin3999 it might be the orientation of the machine.
@kernowcoinringscornishcoin3999Ай бұрын
@@brakthehun machine as in the laser or my laptop if its the laser can this be changed
@samsesam3486Ай бұрын
ok, can you please also show me how to connect the Atomstack to the computer via Wifi ?
@krzysztofrucinski6541Ай бұрын
You are stupid because on the ESP32 board there are WIN and GND pins to which you connect +5v and ground you did not have to cut the socket. This has nothing to do with the professionalism you mention.
@agajgivАй бұрын
WOW.. It's really wonderful.. Thank you for your effort, my friend ❤
@ianjohn885Ай бұрын
thank you so much man, i have been looking for a good starter video on how to use this software and your video is perfect. thank you soooo much man ill sub and keep a look out for more
@baneofyourexistence5911Ай бұрын
“Pull these off… maybe…” What an electrician thing to say haha
@jondoe58662 ай бұрын
Do you have any plans on this design is love to do one.
@GustavoGuevara1232 ай бұрын
Gracias por compartir lo que sabes, me ha servido un montón, armé una máquina CNC y con tus aportes he podido configurarla, un fuerte abrazo 🫂.
@joannamclafferty60912 ай бұрын
I close my eyes and see chuy from pawn stars
@brakthehun2 ай бұрын
Maybe I'm him in the future. Ha!!
@PremalathaParthaPrem2 ай бұрын
Is this suitable for atomstack S10 pro also?
@brakthehun2 ай бұрын
Should be
@corban1112 ай бұрын
Great tutorial 👌 Handy little tip... you can use a putty (here in AU we have Blu-Tack) to temporarily hold the board and wires while soldering. I use this trick all the time for electronics repairs and assembly
@darkblaze402 ай бұрын
o7 really needed this was stupid enough to not put the strip.show outside the for loop lol
@brakthehun2 ай бұрын
I did the same thing at first
@deejaydelacerda2 ай бұрын
Excellent video
@edinmak92262 ай бұрын
Hi, I have an atomstack s20 max. The power of the laser is 18-20w. They cannot cut plexiglass (acryl) 3 mm at all. Is the problem that the laser power is low, or did I not set good parameters for cutting? I use the lightburn program
@brakthehun2 ай бұрын
The AtomStack S20 is a blue laser. Clear plexi does not absorb blue. It passes right through. To engrave / cut clear plexi - you will need a different laser. People usually use a CO2 laser because it is a far infrared beam. at that wavelength,, the acrylic completely absorbs the energy. Unlike blue that passes right through,, the plexi can't pass the IR and it absorbs the energy letting it engrave / cut.
@edinmak92262 ай бұрын
@@brakthehun THAN YOU
@brendaellerridenour91352 ай бұрын
Thank you soooo much for taking time to explain how to use a laser so a layman as myself can understand.
@3dsteveo7653 ай бұрын
Awesome!
@3dsteveo7653 ай бұрын
thank you so much these are great help!
@denispearse-si1oo3 ай бұрын
right click, adjust image. lightburn
@brittanydemaria48773 ай бұрын
Do you have to connect the machine? Can I just send files to an SD card with the Creality Falcon 10W?
@brakthehun3 ай бұрын
I see that it has the SD slot but I don't see a way to access it from the front controls. You may have to connect directly
@erinpacker1183 ай бұрын
Thanks Tony! -Erin
@777smitty43 ай бұрын
Great video for GRBL But I have a little different setup looking for help arduino running separate drivers with ugs how would I connect switches I can’t find any advice on my setup
@brakthehun3 ай бұрын
What's your setup??
@777smitty43 ай бұрын
I don’t have the GRBL shield I’m running straight off arduino unio
@friedrichmandel25743 ай бұрын
Thank you for your detailed tutorials ... helping me a lot as a beginner. If I had a wish to the LaserGRBL programmer ... I would like to have a second indicator for the actual laser power - just like the buffer "VU meter". This would help to utilize the full dynamic range of the laser power (instead of reading the actual Sxxx values while running).
@brakthehun3 ай бұрын
He's very responsive. Request that!!
@yalafilmsdavidjwoodall92013 ай бұрын
Great vid for a newbe like me. How do I reduce power?
@marcuscoronado48553 ай бұрын
how to installl this software?
@brakthehun3 ай бұрын
Windows only. lasergrbl.com
@RicoBogdan3 ай бұрын
very good video but why is the x axis 410 cuz im pretty sure the work are is 400 x 400?
@brakthehun3 ай бұрын
Yours might be slightly different than mine.
@lasandrafernandes30453 ай бұрын
Can you tell me how you got the parameter custom button?
@brakthehun3 ай бұрын
The latest version of LaserGRBL has them by default but I have a video that shows you how to make them: kzbin.info/www/bejne/rXzKe5inf9uSr5o This was before they defaulted to have a perimeter button.
@lasandrafernandes30453 ай бұрын
@@brakthehun got it.Thank you 😁
@dreadfulgentleman3 ай бұрын
Thank you so much for creating this video. I learned a lot from it!
@simonmsiza66673 ай бұрын
Thanks for helping me out.just to make sure when the driver is powered and stepper motor is not connected the a driver will burn out
@annnaziathrahman26464 ай бұрын
Thank you so much for the this! This is literally what I needed for the project, as coding noob, this was mighty helpful, keep on making these solid videos!
@remad17774 ай бұрын
The centreing and framing buttons are grey in laserGRBL even when successfully connected to my atomstack. I have just set it up for the first time. Does anyone know why this might be?
@brakthehun4 ай бұрын
Load a file first. Make sure you're communicating
@remad17774 ай бұрын
@@brakthehun Thank you
@chanchalsakarde27684 ай бұрын
Can it be possible to draw "Thread Art" also called as "string art"
@brakthehun4 ай бұрын
It's a plotter so sure. You can even attach a finer pen to get a more thread like look.
@godin82624 ай бұрын
I don't have the import Raster Image when I open and image it place the image direct on work space and the work space change dimension depend on the image I load and it is impossible to move the image on the work space. What is wrong in my set up? I want to figure out why before buying and other software. Thanks if someone could help