Your Pro

Пікірлер

@RandyWhite-z7p 3 ай бұрын

Thanks! I had a general idea of deck removal but your video zeroed me in on how to do this one & then connecting it back up. Seeing it done makes it much easier than trying to written instructions from the owner's manual.

@reallythough4591 3 ай бұрын

Mine is making a sound like a relay buzzing

@MikeHarless-f2z 4 ай бұрын

Where is it located 5000 timecutter

@officialcarltowns 4 ай бұрын

Thank you for not beating around the bush so to speak and going straight on this. Just needed to see the belt around. Was very helpful. NO nonsense.

@ChpTrxtr 4 ай бұрын

What's the easiest way to lay the tractor over on it's side? Darn thing is heavy.

@yourpro3653 4 ай бұрын

@@ChpTrxtr yeah the John Deere's are tough because they are really heavy. It's helpful to find something about the height of an ottoman that you can put beside the mower where it doesn't roll completely over. You can place it on the side of the dash so to speak as you tip it over. On the really heavy mowers you might need some help

@TJsVette 4 ай бұрын

The hardest part of the whole thing was taking off the spring haha

@brianlaferriere8622 5 ай бұрын

Thank you

@AndréTraversy-p4r 5 ай бұрын

Tanks

@tylerlong4696 6 ай бұрын

Can you use your mulching blad to bag your clippings?

@yourpro3653 6 ай бұрын

@@tylerlong4696 Good question! It would work, it just wouldn't preform as well when compared to a bagging blade.

@stevekohen5943 7 ай бұрын

Do you have a diagram for the 180 Marlo 4 ft wide

@imbuck2u 7 ай бұрын

Very helpful, thank you.

@robertbenjamin8202 7 ай бұрын

just wondering if after removing the deck can you replace the belt if needed

@matthewwarner5050 7 ай бұрын

Great video

@marie0461 7 ай бұрын

Toro z4200 like in this video. White wire coming off relay. Wheres it suppose to be connected too. I putit on the battery side of solenoid. Blows fuse. On the starter side blows fuse. So wheres itgo? It wont start. Please help me.

@Marchbaby1976 7 ай бұрын

Thanks for the video! I was able to do this all by myself! (No man needed! lol)

@JeffNewsome-sz2mt 7 ай бұрын

why want UT crank after it blowed the fuse it still want starty

@timr31908 7 ай бұрын

Looks like they painted my Cub cadet red.. I'm telling you man I swear that tractor was yellow...😊

@anotherbeard667 7 ай бұрын

I replaced my fuses, still won't start unless i jump it. Brand new interstate battery, nothing wrong with the battery. Mower starts and runs perfectly if i jump it, if i don't jump it, it doesn't make a sound.

@stephanie5326 8 ай бұрын

I can't get the deck back on. What order? Middle bolts or backslide ins first?

@yourpro3653 8 ай бұрын

I typically connect the front first then the back hangers

@yourpro3653 8 ай бұрын

It helps to make sure that you're on a flat surface and the tires are aired up

@yourpro3653 8 ай бұрын

Another thing that helps is if you have some type of pry bar or even like a broom handle or something to put underneath the deck on one side that you can use as leverage to lift up the deck a little as you line up the hangers

@billforsyth3 8 ай бұрын

"just plug the fuel line". If I knew where to do that, I probably wouldn't be watching this video. :) instead of showing the belt route two times (which I can rewind), don't just toss out an important fact and not explain. Sorry, don't mean to be whiny, this is exactly what I'm looking for, but now I have to look elsewhere to have all the facts.

@yourpro3653 8 ай бұрын

I appreciate the feedback and I'm always thankful and open to be corrected. However there is no need to plug the fuel line if you tip it up with the carburetor on the top side. Something I do on mowers if the gas might leak from the gas cap is I will add a plastic bag underneath the gas cap and put the gas cap on to prevent gas from coming out the vent on the cap.

@brianhoward2632 8 ай бұрын

And if you have a small fuel shut off solenoid under the carb with a red wire that shuts off flow of fuel then you won’t have much fuel coming out and should stop. You can also just clamp on small vice grips near the carb to stop fuel , but still have the fuel from the bowl under carb, leaking until empty .. I left my tractor flat on ground and jacked up with stands for safety and possible rolling with wheel chocks

@mickball6134 8 ай бұрын

Hi and thanks for the informative video. I bought a Craftsman T240 over 4 years ago and have been happy with its quality and performance, but yesterday experienced my first issue. When engaging/disengaging the blades, it’s now making a harsh metal-to-metal screech which I need to diagnose and (hopefully) repair. If you have any thoughts, I’d appreciate your wisdom. While I’m at it, I’ll replace the blades but am unsure if the blade bolts are right hand or left hand thread. The owners manual doesn’t say. Thanks again from a new subscriber.

@yourpro3653 8 ай бұрын

Yeah few things come to mind. I'll start with the simplest and progress to the more complicated. If you're hearing metal it could be something as simple as the deck metal is bent in somewhere and catching a blade as a blade spins. Or it could be that a blade is bent and hitting part of the deck. Other things it could be is the bearings in the spindles( the blades are attached to the spindle shafts) it could be the bearings in the tensioner pulleys. Besides that there's some Oddball issues it could be such as something on top of the deck being bent and rubbing a pulley. I hope this helps and thanks for the comment

@theage3888 8 ай бұрын

Will this work for the LT2000 craftsman as well? New subbie.

@ba_brisk 8 ай бұрын

i dont understand why you even loosen the pulleys at all. no need

@TonyMontana-tm7ul 8 ай бұрын

Thank you! Big help.

@Threche 8 ай бұрын

Great advice, thanks!

@brianhoward2632 8 ай бұрын

Scott’s drive belt info. Gx10065 or JD m125218 96 x 1/2”

@tylers.1138 8 ай бұрын

Same blown fuse issue, any idea where the short was that blew it?

@TheTrueSonOfFire 10 ай бұрын

👌🏼

@mrcupcakeman32 10 ай бұрын

i have that exact same mower...do you know how to replace that fuse box...i found one of the red wires got crimped up and its causing a short circuit i dont know how to replace that wire

@GoodDartz1 10 ай бұрын

Great video! Glad I came across it. So much easier than the owner's manual made it out to be!

@yourpro3653 9 ай бұрын

Glad it helped!

@larrynaramore7258 Жыл бұрын

Great video, thank you! Do you know how long the belt is? The part number?

@yourpro3653 9 ай бұрын

Sorry I don't have that information now

@tombrownca Жыл бұрын

Thank you. I’ve been bowering 4 hilly acres with a mulching blade for years. Now I see I may get better results with the bagging blade because all I want to do it cut and get it out from under my mower deck. Thanks for your video. I appreciate that you showed both blades.

@kaaraa-mardha1977 Жыл бұрын

Very much appreciated for showing us the belt diagram. Do you have the part number for the belt please

@jadasuga907 Жыл бұрын

What is that 2nd fuse for?

@jadasuga907 Жыл бұрын

My battery won’t stay charged, what do you recommend?

@loneranger5349 Жыл бұрын

I never seen anyone not use a pair of needle nose pliers

@yourpro3653 9 ай бұрын

Haha, I was just doing this to show that it is simple. When I'm pulling decks I typically don't use them because I'm faster without them especially when I'm not using my other hand to film. Thanks for watching and commenting I appreciate it!

@GregoryShelton-s1i Жыл бұрын

Great stuff - thanks man!

@andrewelwood3358 Жыл бұрын

Cheers boss. My lawn thanks you for it 👍🏼

@jonathanlewis5937 Жыл бұрын

Thank you. The shot at 28 seconds was all I needed

@frankcarcione2086 Жыл бұрын

Thanks dude! Did help😊

@kevinselwa8883 Жыл бұрын

Thanks. This got me mowing again today.

@kevinshaknazarian1904 Жыл бұрын

Thank you. Very helpful.

@ismaelperezperez4213 Жыл бұрын

Cual es el número de banda para L130? Como lo busco

@ismaelperezperez4213 Жыл бұрын

Cual es el número de banda para L130? Como lo busco

@philippugh9897 Жыл бұрын

thank you.

@robertmelvin8370 Жыл бұрын

Good job

@pc2150 Жыл бұрын

Got to rebuild belt blade pulley replacement kit for 48 inch deck if anybody else does it make sure it comes with the blade bolts my didn't have them and they were all snapping so I had to go down the hardware store and find different bolts to put in comes with everything but those

@natehicks8939 Жыл бұрын

Did you drain the oil first?

@yourpro3653 Жыл бұрын

Good question, I did not. As long as you tip it where the carburetor and air filter are on the top it should not be an issue

@benc5152 Жыл бұрын

Thank you!

@garyrobert9085 Жыл бұрын

Perfect. Was watching this before reconnecting the deck so I could see the reverse of putting it back up. Wish I had found yours before the removal. It would have been easier than the other videos I watched. Thx

Ең жақсы KZbin

Пікірлер