EEVs have to rotate instead of being pushed/pulled. Use a segmented magnet It will rotate to EEV valve core when turned. Amazon carries them. It may work if you take one or more of those doughnut magnets and break them into semi-circles and put them back together.. One end becomes north and the other will be south.
@mike---4 ай бұрын
audio is muffled and low.
@stilljustaguy4 ай бұрын
Mine has a delay on continuity
@andyreyes64646 ай бұрын
Can you make a video using the carel eev magnets please
@electrolatif6 ай бұрын
Great video ❤ How much you buy EEVMAG0000?
@Munzer19779 ай бұрын
No sound
@peterpiper_2039 ай бұрын
How has it held up ?
@ebbyt0011 ай бұрын
Very good video,I have EEV with a larger OD of Around 3/4" what is the PART NUMBER and OD of your magnet?
@quentinbutlerhvac541010 ай бұрын
The Carel set PN is EEVMAG0000 The largest of the magnets is sure to fit
@Alexsmartway Жыл бұрын
Cheap??
@quentinbutlerhvac541010 ай бұрын
Do you disagree that this meter is inexpensive in comparison to meters with similar functions?
@AZ-kr6ff Жыл бұрын
Take this video down. Or fix the audio.
@quentinbutlerhvac5410 Жыл бұрын
I think I’ll keep it up. Thanks.
@AZ-kr6ff Жыл бұрын
@@quentinbutlerhvac5410 TAKE IT DOWN! RIGHT NOW!!
@oldshoe1 Жыл бұрын
Why are you being so extra. It’s easier if you just raise the volume on your phone. Thank me later.
@AZ-kr6ff Жыл бұрын
@@oldshoe1 NO!! I STILL CAN'T HEAR IT!! TAKE IT DOWN!!!
@manunited9052 Жыл бұрын
Awesome job!
@quentinbutlerhvac5410 Жыл бұрын
Thank you for watching!
@jerrycavallo6103 Жыл бұрын
Volume is poor check Volume on phones
@quentinbutlerhvac5410 Жыл бұрын
I know - sorry!
@jeremylau3054 Жыл бұрын
Weatherallreps mags work for Daikin valves ?
@joelperigo7213 Жыл бұрын
I have tried to cut 2 of those open now with a dremel tool and both time I cut the magnet. What did you use to cut it open?
@quentinbutlerhvac5410 Жыл бұрын
Copper cutters
@joelperigo7213 Жыл бұрын
@@quentinbutlerhvac5410 Thanks, I tried those last week and it pressed the steel housing inwards and pinched the magnet. New blade and went the slowest I ever had with copper cutters.
@MeFixingEverything Жыл бұрын
Thanks
@quentinbutlerhvac5410 Жыл бұрын
You’re welcome! Thanks for watching!
@mikep1344 Жыл бұрын
Good info but very hard to hear this video
@quentinbutlerhvac5410 Жыл бұрын
Thank you! And I agree about the sound. I have acquired a new mic since this. The audio on this one was horrible!
@rustycalvera977 Жыл бұрын
wish this meter had a kickstand
@quentinbutlerhvac5410 Жыл бұрын
That would be a nice addition!
@inespenalosaquintero5531 Жыл бұрын
Quiero ver. El partido de Toliims hoy
@quentinbutlerhvac5410 Жыл бұрын
Not familiar with Toliims
@lonniebearden5567 Жыл бұрын
You can just take an old eev motor cut the wires off and it will open and close those valves
@quentinbutlerhvac5410 Жыл бұрын
Hmm.. Not with any valves that I’ve worked with. The EEV motor is essentially just a coil / stator. Without anything energizing / magnetizing the coil, it doesn’t have the ability to turn the magnet (rotor).
@matttzzz27 ай бұрын
@quentinbutlerhvac5410 i removed an EEV magnet, i also cut out the valve section and tested the magnet by blowing into the valve, rotating the magnet clockwise closed the valve while rotating it anticlockwise opened the valve, confirmed by me blowing into it. So it does work. For some reason this experiment stopped working after i played around with it for a few minutes. I dont know if the valve got stuck open or if the magnet stopped working
@Htown82 Жыл бұрын
Looks very nice multimeter
@quentinbutlerhvac5410 Жыл бұрын
Agreed!
@ae5au Жыл бұрын
Thanks for the video. I'm curious...how responsive is the continuity test mode? Also, the LEDs on the side are to provide a reminder of which terminals to use for the selected mode.
@quentinbutlerhvac5410 Жыл бұрын
You’re right! I just had to go check - I never even noticed the LED above the 10A! Just makes it that much cooler. The continuity test is instantaneous unlike other meters that have the delay.
@Seb8962 Жыл бұрын
Does this multimeter measure milivolts
@quentinbutlerhvac5410 Жыл бұрын
Yes it does!
@kaeking86 Жыл бұрын
I just bought this on a whim... Glad I did. Thanks for the vid
@quentinbutlerhvac5410 Жыл бұрын
Have you had a chance to use it yet? If so, what do you think about it? I love it!
@kaeking86 Жыл бұрын
@@quentinbutlerhvac5410 so far just checking my car batteries and work shop bats. Seems to work pretty well. Feels like a cellphone in the hands which is a plus.
@7yep4336dfgvvh Жыл бұрын
Ordered this just now off amazon. Are you wtill enjoying it? Any problema with it/any gripes?
@quentinbutlerhvac541010 ай бұрын
@@7yep4336dfgvvhI still like mine. I do wish it measured up to 1000 Volts.
@stilljustaguy5 ай бұрын
@@quentinbutlerhvac5410is 600 not enough for residential? I’ll only use it on stuff at my house.
@georgetsetsakos6088 Жыл бұрын
Thank you. Excellent video. I recently had to evacuate and charge my mini split but did not know about this tool. Does the EEV need to be manually opened to ensure a proper evacuation and that the liquid refrigerant finds it's way into the outdoor condenser? Very inspiring video.
@quentinbutlerhvac5410 Жыл бұрын
Thanks for watching! With a 1to1 minisplit it is not critical to open the EEV manually for evacuation as there is only 1 metering device. Therefore, there is no potential for refrigerant to become trapped.
@brahim212612 жыл бұрын
Where can i order this one?
@quentinbutlerhvac5410 Жыл бұрын
Thanks for watching! eevmate.com/
@MrFatboy1922 жыл бұрын
Couldn't find one of these for Fujitsu eevs so had to make my own, 6 mini neo mags and a bit of conduit did the job, works a treat saved $200!
@quentinbutlerhvac5410 Жыл бұрын
I have seen some folks do similar with PVC and magnets!
@Lemonpepperclub2 ай бұрын
Can I get feed back on how you did such I kinda wanna make one for every brand I see re Michaels sells like a 3 pack of those but yeah 200 bones
@MrFatboy1922 ай бұрын
@@Lemonpepperclub send me your email and I send a pic
@MinnesotaHvAc2 жыл бұрын
Have you found a source for the 17.5mm daikin manual magnets
@quentinbutlerhvac54102 жыл бұрын
I primarily use the Carel magnet set for all Daikin valves. They are a little loose but have no issue turning the valves closed. Thanks for watching!
@williamwiese99632 жыл бұрын
Picked mine up today, very nice little meter for the diy projects.
@quentinbutlerhvac54102 жыл бұрын
Awesome! Thanks for watching!
@rolandreyes26362 жыл бұрын
??????? ?
@quentinbutlerhvac54102 жыл бұрын
Thanks for watching!
@Stricker77922 жыл бұрын
coupon code got me one for 16$ thanks for video
@quentinbutlerhvac54102 жыл бұрын
Awesome! Thanks for watching!
@hvacir91762 жыл бұрын
subscribed and alerts on , thanks for the videos
@quentinbutlerhvac54102 жыл бұрын
Thanks for watching! More videos to come soon!
@jaymz00743 жыл бұрын
Thanks for the information. Do you have the links to those magnets?
@quentinbutlerhvac54103 жыл бұрын
Weatherallreps.com/shop They are currently out of stock but they will be back in stock soon!
@jaymz00743 жыл бұрын
@@quentinbutlerhvac5410 thank you
@arodriguez10293 жыл бұрын
Thank you for the video, where can we purchase the magnets?
@quentinbutlerhvac54103 жыл бұрын
Weatherallreps.com/shop They are currently out of stock but they will be back in stock soon!
@nicholasjones19403 жыл бұрын
Great content very informative
@quentinbutlerhvac54103 жыл бұрын
Thanks for watching! Stay tuned for more videos to come!