Joshua BMW guy

Пікірлер

@adiljutt4332 5 күн бұрын

after add liqui moly is it need to change oil at the same time or the next oil change

@cjmania 26 күн бұрын

What is the difference between the Sniper BBD and the Sniper 2300?

@Davyyd1 4 ай бұрын

Hi. I have a vw golf mk5, oil capacity : 4.5L of oil. I recently did my oil change and now i have 4.5L filled. It is good to put this aditive keeping in mind that i already have my oil topped up?

@hristiyanvasilev7466 4 ай бұрын

My engine has a capacity of 6.5 liters of oil and it is full. Does it have to be 6.2 to be able to use the addon

@1991june 5 ай бұрын

Can you used that with mazda?

@franklinmorales4184 5 ай бұрын

How is the combination of 4.0 head and sniper efi. Did the economy/power go up much?

@vvs982 6 ай бұрын

3.years later first time seeing December 20 2023

@TheProjectDprojectd 5 ай бұрын

Show

@SayWhaaaaaaaaaaaaaaaaaaaaaaat 6 ай бұрын

It just hide the noise but doesnt cure anything. Just makes oil ticker

@josepeixoto3715 6 ай бұрын

One of the stupidest setups of bmtroubleU,that saddle tank, seen lots of cars junked because of that; why did they not use a one volume tank is beyond me, more problems than it's worth.

@bengrissom5713 7 ай бұрын

didnt work for me. :(

@leivabernie 7 ай бұрын

Liqui Moly stuff is golden man

@simonmenzies3142 8 ай бұрын

From tbe title I was hoping you’d show how to ‘time’ an m10. The title should say ‘watch me rev an engine’🤷🏻‍♂️

@9595david 6 ай бұрын

Right. Have you found a legit video how to time an m10b18?

@billyadmiraldycitra6958 9 ай бұрын

I can approve this, my e36 m50 (stroked) had the same issue.. been sittinf for 2 months, starts making ticking noise, used engine flush and lifter additive, new engine oil and she's smooth again ❤

@treehugger3615 7 ай бұрын

Did the ticking ever come back? My X3 was left sitting for months during the pandemic, after which developed a ticking afterwards.

@joshprice504 9 ай бұрын

Do you have a pic of how you hooked up the throttle cable?

@johndurante5601 9 ай бұрын

Hey Joshua, I just install the EFI system on my 1980 CJ5. Did you have any problems with it stalling when you were shifting out of gear at a stop sign or at a red light? Mine installs about 90% of the time the RPMs just drop any recommendations at what settings you changed in the computer to help. Thanks for any input.

@nibunaka011 9 ай бұрын

I can hear the vanos too

@Eric-Marsh 9 ай бұрын

I'd like to hear a followup after a couple thousand miles or kilometers.

@Lagrossedodue 11 ай бұрын

10w60 ONLY

@maprz05 Жыл бұрын

I see this was a few months ago, how is he liking the system after running it for a while now?

@joshuabmwguy6444 Жыл бұрын

He is loving it! I called Holley and spoke with a rep. He gave me a few settings to change since we were running a standard transmission. The efi system has been bang on!!

@curimartinez5774 Жыл бұрын

would it be okay to put it in my 04 e46 3 series?

@joshuabmwguy6444 Жыл бұрын

M54 engines would benefit from it due to having hydraulic valve actuators but a s54 would not(M3) because it uses cam followers that are a solid valve train.

@curimartinez5774 Жыл бұрын

@@joshuabmwguy6444 thank you so much.

@jonesworld8703 Жыл бұрын

Where did you get the fuel line return fitting from on the sniper efi?

@joshuabmwguy6444 Жыл бұрын

Summit racing.

@hydn79 Жыл бұрын

That's called heat soak. The results should be recorded on cold start, not when the motor is warmed up

@e36fanatics Жыл бұрын

Lifter tick is not present when engine is just started up it tick when engine is warm at idle...

@joshuabmwguy6444 Жыл бұрын

It was tick all the time. Cold or hot made no difference. It was quiet after adding the LM on cold start and when up to temperature. I am still very impressed with the results.

@mexiquenfrance6084 Жыл бұрын

What was that other rattle sound? I have that too and I'm still unable to find the root cause of it. Sounds like the chain is grinding something.

@donny303 27 күн бұрын

Vanos

@scott5690 Жыл бұрын

Any issue with the coolant temp sensor at the thermostat housing? The Holley video says not to put it there, even though I've seen a few do it.

@joshuabmwguy6444 Жыл бұрын

No issue at all. The computer was happy with it.

@cebtropico Жыл бұрын

That’s a NICE👍COLOUR M3!!

@jcdentonunatco Жыл бұрын

its absolutely purring! The difference it made is impressive

@virgilgray Жыл бұрын

And this is how mechanics "FIX" your car! When you go pick it up, they show you the bill with all the shit they say they did. (DID NOT). And there you have it. THE TRUTH HURTS.

@joshuabmwguy6444 Жыл бұрын

Always take you car to a trusted shop. Ask for the old parts if you don’t trust who is working on your vehicle. Not all shops are created equal. Not all technicians are equal even at the same shop.

@daltonlacey9319 Жыл бұрын

Stoked to look into this. At least until I have time to replace the lifters.

@vicenteh820 Жыл бұрын

👌👌👌

@andrjooo Жыл бұрын

if you just drove the car without adding any thing you would get exactly same result :) This video proofs NOTHING

@joshuabmwguy6444 Жыл бұрын

We did drive the car. Put about 50 miles on it before this. I guess next time I’ll have to do a before with a long drive. Then after results. Thank you for the input.

@efoff652 Жыл бұрын

Do I need to do a full oil change or can I put it in as a top off?

@joshuabmwguy6444 Жыл бұрын

I have only added when I did a full oil change. I have not tried to just add when topping off.

@benshaw576 Жыл бұрын

sounds more like timing chain to me

@31acruz Жыл бұрын

Filthy engine bay, filthy car.

@boostboyracing Жыл бұрын

Why not a big turbo ??

@joshuabmwguy6444 Жыл бұрын

This was for a specific class. Limited rules did not allow boost. But this engine would have loved boost!

@boostboyracing Жыл бұрын

Wish you would do a fully built on big boost. Nobody’s doing it. But I will soon lol

@fregyt Жыл бұрын

The comments r ppl who haven’t had m50/m52/m54. This is a persistent problem from buildup in hydraulic lifter . If the sound does go away after oil and components are warm, chances are it will come back when colder. Will have to give this stuff a try on my m54

@claynoah9025 17 күн бұрын

Did it work and for How long got a beautiful eu spec e46 here in Germany and only thing that throws it all off is those hydraulic lifters

@Daetarg Жыл бұрын

Did the noise come back?

@joshuabmwguy6444 Жыл бұрын

Not yet

@Daetarg Жыл бұрын

@@joshuabmwguy6444 how long has it been?

@cebtropico Жыл бұрын

@@Daetarg he said in a earlier statement his cousins more than a year, no noise 😅😊

@ozsharp9172 Жыл бұрын

So we replaced your lifters and that will be $900 sir

@davitavagyan1851 2 жыл бұрын

how often do you need to add it?

@jcdentonunatco Жыл бұрын

can add every oil change

@josephmalinowski6817 2 жыл бұрын

One shot for you and the rest for the car. Lol

@franciscotrujillo4961 2 жыл бұрын

Cuanto tiempo tardo en desaparecer el sonido , basta con tenerlo 30 min encendido?

@vicenteh820 Жыл бұрын

Sal a la carretera y haces 10km a más de 3mil/3.5 rpm para que renueve el aceite de los taques y listo, funciona!!

@tentywenty 2 жыл бұрын

Guys please try to not do this. It works just fine of course but if your gonna go ahead and do this please just do your valve cover gasket while your at it, plus you’ll be able to check part of your engine while it’s off and directly apply this here product onto the lifters in a fluid/ even manner. Why not knock out 3 birds with one stone right?

@marcusviniciusalbernaz.3040 2 жыл бұрын

Good afternoon, I put 150 ml in a zetec rocam and believe me if you want, the performance of the 1.0 has improved a lot, the product is really good.

@GOLTURBO555 Жыл бұрын

Not for performance young man! This is placebo effect... this thing just work, as a lifter ticking fix...

@redjstc9123 2 жыл бұрын

I feel relieved knowing that there's something foe the problem. Thansk!!!

@mirkoroljic5875 2 жыл бұрын

I bay and put inside in my M50 engin and 0 point.Just lose €€€$$.

@badbanano 2 жыл бұрын

It’s piston slap not lifters.

@joshuabmwguy6444 2 жыл бұрын

It was lifters. Pistons slap will get less pronounced as engine get up to temperature. This ticking didn’t care about engine temperature.

@martinnilpez6572 2 жыл бұрын

Did you change the oil right after or you leave it on?

@joshuabmwguy6444 2 жыл бұрын

Left it in it. Did an oil change right before.

@robertthrem3382 2 жыл бұрын

The trick is bring it to 2500 for 10 mins bleed the air out of the lifters

@rocketsalad 4 ай бұрын

You are correct, that is the factory specified procedure.

@allen9818 2 жыл бұрын

I have an e92 with a n52 engine and added this in but it’s still ticking

@joshuabmwguy6444 2 жыл бұрын

The N52 has issues with not providing enough oil to the hydraulic valve actuators(hva). BMW had us doing a procedure of bringing the engine up to 3500rpm for 5 min or something to that effect. If that didn’t work we had to replace all of the hvas and if that didn’t work we had to replace the head. But that ticking doesn’t hurt anything. I don’t believe this additive would fix your issue. This seems to be more for lifters that have carbon buildup causing the problem.

@xavier8548 2 жыл бұрын

Just got lifter tick out of nowhere when I got off work today, may try this as a temporary fix until I can finally get a weekend off to actually fix and deal with this

@joshuabmwguy6444 2 жыл бұрын

What vehicle do you have ticking?

@MrArunantony 2 жыл бұрын

What is the result now

Ең жақсы KZbin

Пікірлер