These people post a video but never answer any simple questions. Now I have my doubts on ordering anything from them. Glad I found out now before ordering a complete interior kit for my 1962.
@CAsince197711 ай бұрын
Dan, Please contact us at 833-486-7354 or email [email protected] so we can assist you.
@dennisjoseph629 Жыл бұрын
C3's need any help you can give them with ride quality and comfort. A must if your seats are worn at least 50% or more. LOL
@sstocker31 Жыл бұрын
I just recovered my seats out of my '77 with Corvette America covers and new seat foam. It was a really straight forward process, and the new covers fit perfectly over the new foam. Reviewing this video prior to starting made the process a snap. Don't forget to do the last step with the heat gun and a wet cloth......it really helps get the wrinkles out! I also got the same color "Dye spray paint" and painted the rear cover....the match was perfect and now the seats look like new....I'm pretty happy. Thanks for the great video !
@alcasper1908 Жыл бұрын
Why did I get 1/2” clips instead of 3/4” clips? The 1/2” clips bend and pop loose and shutting the project down.
@chass4712 Жыл бұрын
Wow, what an excellent how too video. Thank you for creating this so anyone really can do this task. Mine look like a professional installed the foam and covers. What a great investment for my vette....kind of a 50th birthday present for the legend
@allendonahue7146 Жыл бұрын
my father and i did my 75, we followed the video step by step and turned out perfect,really not that hard once you watch it and understamd it..thank you,keep up the good videos
@keithsclassicgarage1133 Жыл бұрын
My seat covers were glued to the seat foam? Tons of work. Takes 5-8 hours to do each seat.
@michaelwazowski9538 Жыл бұрын
Also anyone else struggling to slid the cover over as well
@alcasper1908 Жыл бұрын
I had a Hell of a time sliding the 1st on over but it went. Haven’t got to the other yet.
@michaelwazowski9538 Жыл бұрын
I must admit the video is well done but I have screwed up the clip sizes and not everything fits on top of that may I just say it’s kind of iratating to see how easily it’s done and struggle to finish
@TheOneWhiteST Жыл бұрын
What if you wanted to shave down the side bolstering on the bottom, where your butt sits. It's causing me pain into my butt and upper thigh area.
@ianmega95502 жыл бұрын
This is the best advertisement for having a pro do this upholstery job.
@robertlucas14352 жыл бұрын
HELL YEAH!
@northernsurferboy2 жыл бұрын
this video would be so much better without that shitty music
@petegrunert92302 жыл бұрын
I just purchased the seat covers seat cushions and hardware, got a price from a shop $350 to do the job for me, haven’t decided if I will do the job myself
@darkleg73552 жыл бұрын
I got my 70 leather seat covers from Eckler's, they came out great. Not too hard to cover, just take your time.
@bobdavis33892 жыл бұрын
I'm going to get my heat gun , I have one just like you used .
@bobdavis33892 жыл бұрын
I am hving trouble seeing the clip as to which way to rotate to pick up a wire . The tool drags so much trash up with it , This guy makes it look so easy .
@bobdavis33892 жыл бұрын
You make it look sooo easy , with leather , it IS NOT easy !
@jsmeswagner61042 жыл бұрын
How much to do it?
@thedrivewayC32 жыл бұрын
Just finished my 71 C3 seats, thanks to this video. Very much appreciated. Never want to do it again, but it turned out great.
@edwardmccarthy55182 жыл бұрын
Get rid of the adds
@proudinspector2 жыл бұрын
Where do you buy this covers please???
@TwoWheelRocco2 жыл бұрын
Nice Job, Thank you.
@gayleg8082 жыл бұрын
Such a great video, do they still provide this total rebuild?
@chasedrake78692 жыл бұрын
This was so easy to do with this video. I had my doubts but it came out great. My suggestions are #1buy new/better push pins for the inner seat. Don't try to reuse. #2 if you don't have hognose pliers buy online with rings for$16 Had trouble finding. #3 plan for your plastic pieces on the seat control to be broken.
@epasternak42063 жыл бұрын
This was excellent,
@Oztralianmade3 жыл бұрын
Good video and easy to follow on how to do it, But .. If possible try and save the factory 3/4 clips used on the back listing .. far superior than what is supplied in the kit (if purchased) .. I had all vinyl cover's and rolling them over the top of the back was "very interesting" as vinyl doesn't stretch like leather .. the use of a hair dryer to loosen up the material goes a long way too . .
@thedrivewayC32 жыл бұрын
Same issue with the 3/4 clips. Many of them were bending and not holding. The wire seemed thinner than the others.
@alcasper1908 Жыл бұрын
If only my leather covers would stretch like vinyl. I might have a fighting chance at getting them on without ruining them.
@user-ob3lc5xh6u3 жыл бұрын
Hi I need to make orders to your company .how
@bobdavis33893 жыл бұрын
Excellant video !
@michaelbaldwin91683 жыл бұрын
DO NOT TRY THIS AT HOME! They do not show the direction of the seat clips, or the wires that attach to the corrugated wire, which is VERY important in getting the tool to fasten the clip to corrugated wire. I found out the hard way when the tool slipped off the clip and sliced into the area between my thumb and index finger. Luckily the blood on the foam won't be seen.
@gadsdonflag42893 жыл бұрын
Do you have a video on the '81-'82 Corvette seats?
@fladrummer13 жыл бұрын
I JUST DONE MU SEATS THE PLASTIC PUSH PINS ON THE SIDE OF THE BACK """"DISREGARD""" USE SELF STAPPING SCREWS THEY HOLD BETTER AND ARE EASYER
@clay38653 жыл бұрын
Looks simple, im dry fitting before cutting any of the new foams. Measure twice, Cut once....rule of thumb.
@ronnierobertson44103 жыл бұрын
Trimmed the seat bottoms as suggested, but that took off too mych foam.. SHould dry fit before cutting. Thanks
@timcote1213 жыл бұрын
My 06 vette coupe sports seats are purforated...
@hickeybond73953 жыл бұрын
I would advise that you do your homework on the seat covers you like-I recently purchased all leather for my c5 from leathers11, an Australian co. on ebay. 5 months and 900 miles later the driver side started showing issues. Leathers11 have not responded to numerous emails. Their price was good but for what?
@MrSteveCasper3 жыл бұрын
It wasn't leatherseats11 was it? It says item location Houston, Texas on their auctions. I've been looking into buying a set of their leather covers.
@hickeybond73953 жыл бұрын
@@MrSteveCasper Yes Steve it was. I had an issue within 6 wks. of installation. They made one response to deny my concern and then would not even talk to me about it. I will eventually have to replace the covers because of this as the perforations continue to fail and leatherseats11 cast the blame on me. Do not buy from them-they will not stand by their product. Thanks for allowing me to speak on this.
@VS-me7ff3 жыл бұрын
Looks as though burlap with the wires were originally on the bottom seats, wonder why they were left out during installation of new foam ? I hope he went back and put it in. If not, I hope they got a hold of the customer and made it right!!!!
@VS-me7ff3 жыл бұрын
Please do a video on 1959 corvette seat covers
@markcrawford88763 жыл бұрын
Thank you. I am now beyond a dought how not to fix my slightly cracked, perfect fitting factory seat covers.