TightWadProductions

Пікірлер

@cottydry 2 күн бұрын

Nice job on making the o-ring replacement easy. In 25 yrs of JD445 ownership the only two components to fail were the fuel shutoff solenoid and the fuel filter assembly started leaking where a fitting is press fit into the body of the assembly.

@TimSchroeter-p4f 11 күн бұрын

I have a 2012 Fusion been having this problem for 2 years had the Dealer replace the control module twice and it started doing it again was pretty mad by now tryed your 2 click fix and it works for now THANK YOU it was starting to drive me crazy 😊

@raulromo7930 14 күн бұрын

what drill bit size you used?

@michaeldstender 18 күн бұрын

I cannot believe you solved the problem!!! I finally have A/C again haha

@prawnstar9213 20 күн бұрын

It’s not a build it’s an outer restoration..

@jayo3865 22 күн бұрын

I have the same truck 1929 ford model a roadster pickup

@bofeity 22 күн бұрын

You’ve convinced me to value these cuts lol

@nicholaswilliams7557 23 күн бұрын

The PTO poly, I drilled out all the spot welds and replaced the bearing inside of it and then took quarter 20 bolts and reassembled it and it worked great

@nicholaswilliams7557 23 күн бұрын

Mr. I feel your pain. I just had a right side connecting rod grenade itself inside the engine. Luckily the crank was good and the cylinder wasn’t damaged so I just slapped a new connecting ride. Use the old piston and I’ve got compression again tonight. The engines completely completely rebuilt and ready go back in that back bracket there by the oil cooler bolt onto the tractor before I put the engine on. I thought that thing coming off man.

@nicholaswilliams7557 23 күн бұрын

@topmaster5037 23 күн бұрын

Holly shit you just save me brother!!

@Worlds_Worst_Guitarist 23 күн бұрын

Top Video! Could learn a lot by it!

@EnragedApathy 28 күн бұрын

Cabin fans in my 2012 would stop working randomly. The fix for my issue was to unplug the main unit under the passenger glovebox and plug it back in fixed it everytime until the fuse blew. Gonna try to get that fixed because no AC mid summer is not the move.

@heathermishra Ай бұрын

I replaced the ac compressor, ac line, re vac , alternator, radiator fan 2 times, Water pump and belt 3 times, both filters, and my car is heating up. Every month it is something with this car. Now I have to replace the blower motor for the 4th time it's messing up. Also replaced the resistor. Mine is a 2011 Ford Fusion SE V6 3.0L. This car is full of issues. It's heating up been sitting with the ac on now for 5 mins and it's heating up. I have no idea. When I turn the ac off it goes back to normal.

@tanayshiawilliams1360 14 күн бұрын

I have the same car and have so many issues. Now I’m trynna figure out why my ac not working

@vicc6744 Ай бұрын

I watched this twice and it's very very impressive - and you guys are equally amazing. BTW did the wich get hot?

@tightwadproductions961 Ай бұрын

Appreciate it. It's been a while since we did this, I recall it getting warm/hot but not catastrophically.

@vicc6744 Ай бұрын

you guys did this on just one battery?

@tightwadproductions961 Ай бұрын

Yeah, just the one

@benkuehnle4071 Ай бұрын

That’s sweet!

@josephhaugen3207 Ай бұрын

Found one of those in the woods at a house I was working out in the country bought it now I'm trying to get it running

@bleepers3 Ай бұрын

This video helped me figure out what im gonna do with my suspension, im using what i got so no welder lmao, but getting a small 90cc atv for 100$ so i figured id fix my mower as im offgrid on 152 acres and wanna drive on it lmao

@donkeydiehard879 Ай бұрын

nothing like over trouble shooting something simple. 😂 I'd also recommend getting a stihl carb. Cheap Taiwanese carbs will never run right. You're gonna run way too rich and clog the arrester in no time. Run a landscape companies maintenance. Aftermarket carbs are aweful. Theres a reason they are cheap. If you're on a budget rebuild the stihl carb. If you're not just bite yhe bullet and get a new stihl carb.

@delatroy Ай бұрын

I have a very similar issue on the FS70 but the spark arrestor on this model is a rectangular sheet which I've removed completely and still have the same issue. Any ideas?

@michelleslutpuppy4355 Ай бұрын

I love coe,coa,rattods, classics,

@michelleslutpuppy4355 Ай бұрын

Penny farthing

@brucesieverts1236 Ай бұрын

I have fond memories of these old tractors. it was what I learned to drive on . I liked it so much that I sat behind the wheel for 28,000 hours and the engine had never been touched since it left the factory.

@RustyInventions-wz6ir Ай бұрын

Just found your channel and subscribed. Very nice work

@tonedpeter Ай бұрын

I adore how cleanly you routed it, great work!!

@User161803399 Ай бұрын

you didnt have to adjust mixture at all?

@rickii2010 Ай бұрын

Get rid of that blade at d end. Very dangerous

@bobdillon1138 2 ай бұрын

You planed out a good StratSg and it worked well.

@tightwadproductions961 2 ай бұрын

Thanks!

@AverageHuman7026 2 ай бұрын

It's really fun doing stuff to guitars and screwing around them. Also fun to watch other people do that too. Thanks for making this video and sharing.

@StephenGallacher 2 ай бұрын

The SG sounds great.

@guitarman6632 2 ай бұрын

I snagged a Gibson CM black SG, in 2016. Dirty fingers and FXR FR. I'll take top dollar in 2 more years !

@middle_pickup 2 ай бұрын

The problem is that Fender designed the pickups for a wider string spacing than Gibson. You're not going to get a balanced tone across all those polepieces. Why does that matter? It matters because you're now limiting your pickup's effective signal output. I would expect that about ~10% of each pickup's magnetic field is not in the right distance of the strings on your SG. A custom wound pickup set would be the solution.

@tightwadproductions961 2 ай бұрын

I was originally going to get some fralin blade pickups to avoid the potential problem, but I didn't want to initially spend that much on pickups. The bridge pickup pole piece spacing is pretty well aligned. It gets off more as you go towards the neck. The biggest issue I noticed at first is that it is difficult to get the necessary height out of the bridge pickup to match the volume of the others. I removed the rubber tubing off the screws, maxed out the height, and adjusted the pole piece height. It is now reasonably close.

@pablo.l 2 ай бұрын

Bro... The string is always vibrating while you're playing. The pole position is not so critical. Also magnets don't have laser focus attraction/magnetism.

@middle_pickup Ай бұрын

@@pablo.l Pickup position matters greatly to the tone of the pickup. This is especially true for single coil pickups like the stratocaster's design. If you've ever adjusted the pickup heights of a strat, you would know that.

@pablo.l Ай бұрын

@@middle_pickup that's a different thing. Pickup height affects the whole magnetic cloud proximity to the strings vibration. That's important. Pole positions not so much.

@middle_pickup Ай бұрын

@@pablo.l The pole piece is the magnet in a strat pickup. It's literally the center of the magnetic field. You're not utilizing the full sensitivity of the pickup if you don't match the strings to that pole piece.

@123TheGuitarist 2 ай бұрын

very cool, modding cheap guitars is fun

@robertsilva5041 2 ай бұрын

Outstanding job Sir.

@billyvitale8994 2 ай бұрын

Frank Marino uses this config. Sounds good..nice job.

@spokes28 2 ай бұрын

Excellent solutions to your conversion problems. Great job!

@brianpair2934 2 ай бұрын

I will definitely try this. I spent today driving around temperature was 86° with no A/C. It's been working intermittently for a few weeks now. I charged it with a little refrigerant today but it was only a little low so it didn't help at all. I'll definitely try this work around. Thank you in advance.

@FarReachFR 2 ай бұрын

Looks great. I like the rear suspension configuration you put together

@77lilbuddi 2 ай бұрын

Thank you for the information. This worked perfectly and now when I need it disabled for maintenance, I can simply unplug it temporarily until I'm done, and then hook it back up.

@nopriors 2 ай бұрын

The smile says it all. looks like you are having a blast getting piles moved. Nothing is better than getting Direct TV out of your yard!

@charleslanphier8094 2 ай бұрын

Every guitar at Sweetwater goes through a meticulous process .......

@garywelker8398 2 ай бұрын

You got lucky, would have been better BEFORE you did all this teardown and REBUILD is to CHECK for SPARK and COMPRESSION, if so, redo carb, GET RUNNING , THEN is the gen part working? If not, then your looking at $$ . All your work would have been for NAUGHT.

@jonhribeiro9526 2 ай бұрын

Você trocou o raio da escala? Coloquei uma gotoh na minha guitarra ibanez,mais sinto que o raio da escala é menor que o da ponte! E isso faz com que a corda G fique um pouco mais alta do que as outras..

@r2skyvader Ай бұрын

I added a 1996T to my Jem Jr. I shimmed my bridge with brass shims to match the neck radius.

@jonhribeiro9526 Ай бұрын

@@r2skyvader obrigado

@MervandtheMagicTones 2 ай бұрын

It's great to see your skills in action! Not many craftsmen are doing these old radiators any more. We need guys like you out there!

@paulhancock7670 2 ай бұрын

Wow - all that work to make it look worse.

@Jamie-zs8ok 2 ай бұрын

So that 3rd gear is really tall huh?

@dragan4658 2 ай бұрын

This is the 2nd video of yours I have seen so far and both are commendable! 1st was stainless steel frets you put on an Sg sparkling burgandy.

@dragan4658 2 ай бұрын

That is some precise work you've done on an amazing looking guitar! Im thinking of getting an Epi Sg in sparkling burgundy with P90's as Gibson doesnt have a sparkling burgundy for 2024 so I'de have to go used which with shipping is more than a brand new Gibson. At present I have an Epi Sg Pro with a Dimarzio Dimebag in the bridge and its amazing! Gibsons should have stainless steel frets as standard. Thanks very much for sharing

@MustangSean 2 ай бұрын

I’m having issues with mine as well. Does anyone know if this trick works with the upgraded temp control with the push button instead of the dial?

Ең жақсы KZbin

Пікірлер