You could use a bandsaw or handsaw to cut off the majority of the waste and get close to the line, then a handplane (while elevating the short end like he did with the planer).
@stevejakobsen27652 ай бұрын
Router sled maybe..
@Againstthegrainwoodworks2 ай бұрын
@@stevejakobsen2765 That could potentially work if you had the router or sled at the correct angle.
@jasondoust49352 ай бұрын
Hmmmm... Without a bandsaw, then possibly hog off the bulk with an electric plane and finish in the thickness planer? Messy, but fairly quick.
@Againstthegrainwoodworks2 ай бұрын
A bandsaw would have been the key solution. That is one tool I do not have though. Although the planer worked out.
@asbrand2 ай бұрын
If you will put a sacrificial board against the fence (laying down flat, not vertically like another fence), that'll let you do those cuts all the way through the soap holder and not need to cut off that 1/4". If you have a spindle sander, you can use that to do the concave part more safely as well. Great idea though! Love it!
@Againstthegrainwoodworks2 ай бұрын
@@asbrand Thanks,l for the comment. The reason I did not use a flat board as a spacer is I like the way my cut depth varied. (Deeper away from the saw, shallowest against the fence. In my mind this will allow water to drain from the grooves). I do like the spindle sander idea, I’ve yet to get one but would like to.
@duaneritter39322 ай бұрын
safer and quicker on a table saw for ripping the end off. I have made "custom pieces" and watched those suckers explode lol
@Againstthegrainwoodworks2 ай бұрын
@@duaneritter3932 Oh yeah, I agree definitely safer. I know better, but I was already at the miter saw.
@ShamanETM2 ай бұрын
A spar urethane would make them water proof forever. Only problem there is you loose the feel of the wood. I really like the actual feel of it. I hadn't seen one of these done before that is a good Idea and we all end up with offcuts near that size all the time. I have a bucket full of them I use just for fire started in the winter.
@Againstthegrainwoodworks2 ай бұрын
@@ShamanETM Thanks for the tip. If not using a natural finish I tend to favor lacquer for its ease of application. I may have to try out some spar one day.
@asbrand2 ай бұрын
@@Againstthegrainwoodworks - you could also try wipe-on poly.
@Againstthegrainwoodworks2 ай бұрын
@@asbrand thanks for the tip. I’ve tried poly a few times, didn’t care for the extended dry time.
@Againstthegrainwoodworks2 ай бұрын
Thanks for watching! Let me know if you’d like to see more short video format, easy project ideas. Like, Subscribe, and comment to show support.
@george92422 ай бұрын
Solid work, man.
@Againstthegrainwoodworks2 ай бұрын
@@george9242 Thanks man!
@toddpeterson16732 ай бұрын
I noticed your dust collection cart in the background, not using the PVC pipes as most videos show. Guessing you ran into the same problem I have, the feet on the vac have changed and now you need a 2 1/4 pipe......I found a solution using a power tec reducer, but once, I built it, it was way too wobbly, so, there goes $20 of PVC down the drain for now and I'll build a plywood cart to put it in. I am orange vac hose, what size is it and where did you get it? Looking for a smaller hose to use with the vac for smaller tools.......
@Againstthegrainwoodworks2 ай бұрын
Yeah I haven’t got around to finishing my dust collection the way I want. I do need to run hard piping. The orange hose came from Home Depot.
@UrfavH-u1e3 ай бұрын
Slay
@gailjohnson35443 ай бұрын
Hi, can you share the measurements
@Againstthegrainwoodworks3 ай бұрын
I do not have the measurements anymore. I want to say these were 24”x24”
@Againstthegrainwoodworks4 ай бұрын
Dewalt 20V Framing Nailer: amzn.to/3QNx6Dw
@trinaberks5 ай бұрын
Love this idea.
@Againstthegrainwoodworks5 ай бұрын
Thank you!
@THRILLLYFEENTERTAINMENTINC5 ай бұрын
Great video and I love your channel name. Also don't stop making videos your good at it!
@Againstthegrainwoodworks5 ай бұрын
Thank you, I appreciate that! It’s definitely not easy trying to grow the channel. Thanks for watching.
@Fixbuildflip-Dustin-Boettcher6 ай бұрын
Whats the overall dimensions?
@Againstthegrainwoodworks6 ай бұрын
Dustin, the tabletop is 4’x6’.
@Fixbuildflip-Dustin-Boettcher6 ай бұрын
That’s perfect i love the design
@Fixbuildflip-Dustin-Boettcher6 ай бұрын
Whos workbench inspired yours?
@Againstthegrainwoodworks6 ай бұрын
@@Fixbuildflip-Dustin-Boettcher thanks
@Againstthegrainwoodworks6 ай бұрын
I looked at many builds, from Bourbon Moth to John Builds It. Took ideas I liked from others and created what I thought would work best for my needs. I’m super happy with it so far.
@thumbwiz6 ай бұрын
It turned out awesome! Thanks for sharing.
@Againstthegrainwoodworks6 ай бұрын
Thank you, I appreciate that.
@Againstthegrainwoodworks6 ай бұрын
Supplies: Digital angle gauge amzn.to/3x59AuB Kona stain amzn.to/3Tx2XJb Lacquer amzn.to/43vMBoG
@Girlwithnonametx7 ай бұрын
Looks great!
@Againstthegrainwoodworks7 ай бұрын
Thank you!
@Againstthegrainwoodworks7 ай бұрын
Thanks for watching, Links to some of the products used: Natural wood filler amzn.to/3Sib9we Blum concealed hinges amzn.to/3u84OLQ Drawer pulls amzn.to/3HyUxvf Drawer slides amzn.to/3vU2I2L
@Againstthegrainwoodworks7 ай бұрын
Thanks for watching, Supplies used: Leveling feet amzn.to/3SWC0je Removable casters amzn.to/3STr05W Craft paper amzn.to/3UxQqY4 Wood filler www.amazon.com/dp/B001733MIG/ref=cm_sw_r_as_gl_api_gl_i_N6B8TBHTZ2GAJHP178WW?linkCode=ml1&tag=againsttheg0b-20
@Girlwithnonametx7 ай бұрын
Looks good!
@Againstthegrainwoodworks7 ай бұрын
Thank you!
@funfreq92828 ай бұрын
I have this saw I might do this UG to the fence! The saw in general will get the job done it does have a lot of shortcomings. For the money I paid it wasn't too bad until I had to fix all of the problems with it. With the Ridgid table saw you are paying a for a short lifespan and design issues. The fence is marginal at best hence the upgrade you are demoing! The other things that people may not no about is the trunnion system. This should be the part of the saw that is bulletproof and is far from it and has alignment issues. I had to drill and tap holes in the trunnion base for alignment screws in order to square the blade to the fence. The other problem when you get to its service life is the motor. It is proprietary and costs half as much as the saw so when it goes you pretty much throw the saw out. People that are looking for an inexpensive table saw should know that there is no such thing and should save their money for a good entry level cabinet saw.
@Againstthegrainwoodworks8 ай бұрын
I think the fence upgrade is well worth the money. Luckily I haven’t had much of an issue with alignment or the motor on mine, although I’d agree the cost of parts probably do make these somewhat disposable.
@funfreq92828 ай бұрын
@@Againstthegrainwoodworks I'm still using my saw and it works fine! I just cleaned and waxed the top last week. If I had it to do over I would have bought something else! Lately I have been looking really hard at the Harvey stuff! of course SawStop always gets a lot of love! Thanks for the tip on the fence upgrade!
@Againstthegrainwoodworks8 ай бұрын
@@funfreq9282 Same, one day I’ll upgrade as well. I’ll wait until the timing is right or this saw dies though.
@danielgallegos75788 ай бұрын
Great video, have been looking forward to this 2nd part. Overlapped audio at 10:54-11:38. Doesn't ruin video, but very distracting.
@Againstthegrainwoodworks8 ай бұрын
Thanks for watching, and I appreciate you letting me know about the audio. I’ll see what I can do to correct it.
@Clemandsimms8 ай бұрын
how much dirt do the planters hold?
@Againstthegrainwoodworks8 ай бұрын
It’s been a minute since I built these, but I believe they were 2’x2’x2’. In that case it would be 8 cubic feet per planter. Locally I can get 2 cu ft bags of soil so those work out good for filling them.
@Clemandsimms8 ай бұрын
thanks for quick response! real nice planters. Did you drill in any drain holes on the bottom of the corrugated panels?@@Againstthegrainwoodworks
@Againstthegrainwoodworks8 ай бұрын
@@Clemandsimms I believe so, If I put a bottom in my planters I always drill a series of 1/4” holes for drainage.
@Girlwithnonametx8 ай бұрын
Thank you! #WinterStorm
@Againstthegrainwoodworks8 ай бұрын
You're welcome!
@Thatgurl_lol9 ай бұрын
👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@Thatgurl_lol9 ай бұрын
Omg slay
@Againstthegrainwoodworks9 ай бұрын
Thanks for watching! Consider liking, commenting, and subscribing as it’ll really help me out. Here’s a few items used in the build. Titebond 2 amzn.to/3tKyONI Glue brushes www.amazon.com/dp/B00CPTGGNO/ref=cm_sw_r_as_gl_api_gl_i_NFF289S00DHAW6V4PTJ6?linkCode=ml2&tag=againsttheg0b-20 Makita Track Saw amzn.to/3tL8Rh6
@TheChoirDirector11 ай бұрын
Thanks for taking the time to document! Looks pretty good!
@Againstthegrainwoodworks11 ай бұрын
I appreciate the comment, and thanks for watching!