Пікірлер
@christopherjohnson1023
@christopherjohnson1023 6 ай бұрын
The top hose that was leaking is a pressure vent pipe to the atmosphere. They get clogged over time and need cleaning out to keep the pressure in the drum down.
@slim8928
@slim8928 7 ай бұрын
I have W4800. Whats the part number of the shocks ? Thanks
@slim8928
@slim8928 7 ай бұрын
I have W4800. Whats the part number of the shocks ? Thanks
@jpcarrilloe
@jpcarrilloe 7 ай бұрын
Thanks a lot for the video, really useful!
@zlatanzakic
@zlatanzakic 11 ай бұрын
This washer is at least 30 years old, isn't it? Looks like the early '90s to me.
@fablan3308
@fablan3308 Жыл бұрын
Why do you polish it doesn't make it a smooth cut
@Bunczu
@Bunczu Жыл бұрын
Could you write what was not fitted? Heard to listen and dont understand that part. Have you had wobbling on the grinding stone?
@juleskayak
@juleskayak Жыл бұрын
Thanks very much for your helpful video ! How they make access so difficult ! I have a Paragon W2440 bought in 2005. The 'third party / non original' spares are the same as whats fitted to the machine: Suspa
@matthewmitchell9220
@matthewmitchell9220 2 жыл бұрын
I just found one of these but it’s name is different!!
@joserodriguez-wm3bm
@joserodriguez-wm3bm 2 жыл бұрын
me too mines is ELITE
@morelenmir
@morelenmir 2 жыл бұрын
Is the dismantling procedure the same for the 800X? I think it would be easier to crimp the proper plug than cold-patching the battery leads. I wish there were some way to replace the inevitably-broken frames as well!!! Maybe something 3D printed--it couldn't be any _less_ prone to breakage than the original.
@tabaccheriacastignani4521
@tabaccheriacastignani4521 2 жыл бұрын
Nei perni di rotazione degli assi presentano dei cuscinetti o delle boccole ? Grazie Do they have bearings or bushings in the pivot pins of the axes? Thank you
@blaqwize1103
@blaqwize1103 2 жыл бұрын
Thanks! Yes, I turn mine on and it channels a demon and starts furiously threatening all mortal souls in the room. I pounced on it and rode it like a bull out of hell, rodeo styles. Then it coincided, and started screaming at me as it punched me through its own chassis. I got it in a choker hold just long enough I could reach around and hit the off button… and that would have been the end of it, but I couldn’t take my eyes off that alluring orange button… and the battle continues to this day.
@MG63
@MG63 2 жыл бұрын
Are you balancing your linen correctly. Sometimes if you put heavy items like towels or jeans in with lighter items the drum won't be balanced properly and cause the drum to bang or vibrate. Also make sure you put enough clothes in. Not enough clothes can cause an unbalanced drum when spinning.
@blaqwize1103
@blaqwize1103 2 жыл бұрын
@@MG63 I just did a light load to test. I bought this machine second hand. The seller told me it worked. It works alright, I’ve got the battered soul to prove it. I’ve never met a machine so powerful. Although I think the shocks are gone. So I bought some shocks and I’m building up the courage to install them. But it’s not a priority in my already urgent life. I’m replacing an old washing machine that was built just after WWII. It is also a powerful bullet proof machine, it has 2 drums, a seperate drum for spin cycle, but it has tendency to destroy my clothes, by twisting them all up in a knot. Lucky I’m a rigger and an expert at untying knots. Although, I would like the luxury of employing a washing machine to wash my clothes so that I don’t have to. I’m just trying to work my way into the 21st century. Thanks for the advice, there’s a chance the machine is under loaded.
2 жыл бұрын
Looks interesting. How did you get power?
@gopaliyer7267
@gopaliyer7267 2 жыл бұрын
Thanks for your video. I have a W1918 and access to the shocks is only possible from the front. You are lucky to have side access. That said, how easy was it to loosen the bolts for the shocks replacement?
@z0nedIn
@z0nedIn 10 ай бұрын
I also have a W1918. Still trying to figure out how to get to all the shock bolts. I can get to 1, but I cannot get it to budge....
@z0nedIn
@z0nedIn 10 ай бұрын
So at the weekend I managed to replace the shocks in my W1918 by tipping it on its side and removing the bottom panel. Took a lot of torque to remove the bolts and it's a tight space but got there in the end.
@pavingos
@pavingos 3 жыл бұрын
Tak for en fin video :)
@danrogo2001
@danrogo2001 3 жыл бұрын
What is the granulation of the stone?
@宇潘-d1m
@宇潘-d1m 3 жыл бұрын
我也刚入刻这款,针对中国玩家的软件下载很不友好,需要翻墙!5555
@mikepeterson6527
@mikepeterson6527 3 жыл бұрын
Terrible engineering on the wheel terrible run out can’t really sharpen properly, Very poor quality
@joserodriguez-wm3bm
@joserodriguez-wm3bm 3 жыл бұрын
the bottons go the other way i got the same radio the flats bottons
@One2cut
@One2cut 3 жыл бұрын
Thanks.
@MrDanTheMan7777777
@MrDanTheMan7777777 3 жыл бұрын
I notice your headband cushion isn’t original. How did you replace it, and where did you get a replacement cushion?
@One2cut
@One2cut 3 жыл бұрын
they are bought in china. to another model and redesigned to fit mine
@One2cut
@One2cut 3 жыл бұрын
FORCE XO7 Recon 50. Aliexpress ;)
@wesleyhaast2302
@wesleyhaast2302 3 жыл бұрын
Why has it to be a 1000mah. Can't i use a bigger one. As long as it fit's in it should be okay right?
@One2cut
@One2cut 3 жыл бұрын
larger will not fit max 1000
@wesleyhaast2302
@wesleyhaast2302 3 жыл бұрын
@@One2cut mh, i'll let you know, i orderd a 1800 and a 1000 we'll see. normally it should fit just fine.
@AlexandreVolpi_
@AlexandreVolpi_ 2 жыл бұрын
@@wesleyhaast2302 did it work?
@wesleyhaast2302
@wesleyhaast2302 2 жыл бұрын
@@AlexandreVolpi_ yep. Just the right voltage and size of package
@AlexandreVolpi_
@AlexandreVolpi_ 2 жыл бұрын
@@wesleyhaast2302 nice, I already ordered mine, but it's a 2000mah (same voltage and size, but thicker)
@azizii614
@azizii614 3 жыл бұрын
Wrong direction?
@roltol7539
@roltol7539 3 жыл бұрын
still using it after 5 years working ok ? :) any issues i need to pay atention, since im looking to buy one for 100euro
@miscellaneous5268
@miscellaneous5268 4 жыл бұрын
Why do you spin the wheel towards you when sharpening? That's a massive safety risk.
@redgum1340
@redgum1340 4 жыл бұрын
Why are the wheels off center and wobbling? Doesn't look very good to me.
@miscellaneous5268
@miscellaneous5268 4 жыл бұрын
Still worth the money.
@DarJakBar
@DarJakBar 4 жыл бұрын
that was good, Thanks
@HelleRita
@HelleRita 4 жыл бұрын
Just got mine, but the index for chisel sharpening is completely off. Did you have that problem? And if so, how can I correct it, please?
@arishzida6090
@arishzida6090 4 жыл бұрын
Hi can you send me the pictures or name this mashing?
@benjohnson5505
@benjohnson5505 4 жыл бұрын
wonderful video thank you
@bournville511
@bournville511 5 жыл бұрын
What polish is that your using?
@richarddebono7092
@richarddebono7092 5 жыл бұрын
This machine is a hunk of shit. Currently trying to refund mine after less than a week the leather has an air pocket bulging in one spot & is coming off at the join, the wheels not round or true & it doesn't come with a truing tool. It also has 2 huge plastic star headed guide rod fixing bolts that block you from passing your blade across the machine. A perfect example why it always costs me more when i try to go cheap. When will i learn!
@reorg
@reorg 5 жыл бұрын
Is the only difference between the 120 and 60 jig the with of the knife holder?
@radekserwis
@radekserwis 5 жыл бұрын
czy podczas ostrzenia woda leci na maszyne i obok na lewo i na prawo ?
@radekserwis
@radekserwis 5 жыл бұрын
ostrzymy pod prad czy z pradem ?z kierunkiem obrotu czy odwrotnie ?
@stewandumps
@stewandumps 6 жыл бұрын
nice video thank you.
@mogbaba
@mogbaba 6 жыл бұрын
You didn't say anything about the jigs. Do they come with the machine?
@TheKranjcecsPlanet
@TheKranjcecsPlanet 5 жыл бұрын
only included is device 70 (universal device for straight standard tools eg chisels)
@marmac567
@marmac567 6 жыл бұрын
1.47,, don't need a dial gauge to see wheel running out of true.
@bendixGg
@bendixGg 6 жыл бұрын
look at the run out on the abrasive wheel, thats disgusting. Thats not right??
@المركزالايطاليلسنالعده
@المركزالايطاليلسنالعده 6 жыл бұрын
اريد شراء هذا المنتاج انا من مصر
@simonecamplani2430
@simonecamplani2430 6 жыл бұрын
the stone is of a terrible abrasive that split every tool you put on
@CinntSaile
@CinntSaile 6 жыл бұрын
Tusind tak!
@jeffreylord8172
@jeffreylord8172 7 жыл бұрын
i have this machine , while the machine is very good the CHINESE Abrasive wheels , are ABSOLUTELY GARBAGE, they are extremely poor quality with massive soft spots. i had the original replaced under warranty, the second wheel was no better if not slightly worse. I am a retired ABRASIVE SALES REP, and have some knowledge in abrasives , bonded, coated , vitrified, etc these blue wheels are JUNK
@difflocktwo
@difflocktwo 7 жыл бұрын
Jeffrey Lord I am no abrasive expert but I have noticed the stone seems to release abrasive excessively and unevenly making the wheel go out of round and form high spots.
@jeffreylord8172
@jeffreylord8172 7 жыл бұрын
difflocktwo you can get a grey stone from SEALY'S ON E BAY It will need a 20mm to 12mm in insert for the shaft . Much better wheel '
@paulorchard7960
@paulorchard7960 5 жыл бұрын
Jeffrey Lord thanks for that post, I just bought one of these machines and have had a lot of difficulty getting a square edge on my tools. Another buy will be a good stone! That will solve my problems!
@yolmak1793
@yolmak1793 7 жыл бұрын
I bought a Tormek and sold it a month later. These types of wet grinders are VERY, VERY SLOW. It's poor design. Knives can be sharpened much faster without overheating/damage to the blade.
@miscellaneous5268
@miscellaneous5268 4 жыл бұрын
And how exactly do you do that?
@mickestahl6178
@mickestahl6178 7 жыл бұрын
I have looked at the Scheepach grinder and it feels very "China copy" of a Tormek. I use an old Tormek that are from about 1990 and it still works perfectly. A sturdy welded steel body and very stabil construction, no flex in the tool rest. Tormek are giving 7 years warranty on the bigger T8 even for professional use and for the smaller T4 witch are more in the same range as the Scheepach they give 7 years for home use. I would put my money on Tormek, the quality are so much higer and you have to see this as an investment for many years to come.
@tony82122
@tony82122 7 жыл бұрын
Does this come with the knife jig and other accessories?
@MrWhitelines
@MrWhitelines 7 жыл бұрын
1.44 "Or your wife really wants sharp knifes" Are you serious? Never, I repeat NEVER give the wife sharp implements!
@michaelrommedahl525
@michaelrommedahl525 7 жыл бұрын
Danish too..?? Thanks for the rewiev.... I Just bought a 2000S
@Tonyplat98
@Tonyplat98 7 жыл бұрын
you Dutch? nice accent
@EddSjo
@EddSjo 7 жыл бұрын
Sounds like a german accent.
@christianherr6969
@christianherr6969 8 жыл бұрын
thanks for sharing!
@kylleven
@kylleven 8 жыл бұрын
Hej, tak for videoen - jeg går og overvejer at købe sådan en maskine... er den for "grov" eller for stor til at kunne bruges til selv små lovlige lommeknive? Eller er den mere til større kokkeknive, stemmejern osv? Hvor skarpe bliver knivene, kan de eks blive skarpe nok til at barbere osv? Vh. Carsten