Great set up! Thank you for your service brother and wish you much success!!!!
@tedbettker2634Ай бұрын
Beautiful truck brother
@michaelc7283Ай бұрын
Update, I installed my GF metering valve stickers that i purchased and they look great. Have one question. You mention on the video that you can secure the GF handles with a screw. What type of screw? I see where to drill a hole on the handle, but how do you secure it to the plastic body section? Are there any video links to see how it's done? I would like to secure my handle. Mine feels a little lose and I don't want to lose one while driving.
@angela9965Ай бұрын
My pavers were installed after I bought this house and sealed 3 different times. 1 after they were installed and then a few months after because it looked like crap and then again a few months after that because the sand washed out. Well it has all failed again and I am handy and could probably do it better myself. I have a couple questions. What kind of sand should I get in tampa fl and after I do the sand should I rent a compactor machine to run over it. Also if I use the wet sand method how long do the pavers need to dry. Pavers are mostly in screened in area around salt water pool. And pavers are concrete. Any tips and advice would be greatly appreciated
@MyPressureWashingBusinessАй бұрын
Thank you for your service! Great looking truck
@northjerseykevin4092 ай бұрын
Impressive,,,,really well done. I’ve been looking at trailers and skids. I’m a carpenter by trade and weld as a hobby. I really should be taking notes and building my own. Great content
@northjerseykevin4092 ай бұрын
Good luck to you. Thank you for your service. The truck looks great
@DavidWilliams-q2o2 ай бұрын
Like to fine out more, about purchasing a pressure washing truck from you,or a recommendation of a food company.
@properexterior2 ай бұрын
We can definitely help you out shoot me a text at 904-999-8087
@nslamon3102 ай бұрын
What are brand stripper are you using?
@properexterior2 ай бұрын
Trident
@MVRC182 ай бұрын
Hey man, question.. I tried a half inch barb in where the ball valve was to replace the ball valve and have a better barb. Only problem is it doesn’t seem to fit where the ball valve was. What type of barb are you using for that? I have an older ar-45 model so I need to find the correct barb that will fit.
@properexterior2 ай бұрын
Hey man, the barb size is going to be dependent on whatever output hose you are using to the hose reel. As far as the threads go, the piece that goes into that outlet manifold has the two green O-rings on it and then a female threaded portion. Typically those threads are quarter inch or 3/8 inch. Therefore, you would need to get an adapter that goes from 3/8 to half inch and then run your regular hose from there
@midlifemike49162 ай бұрын
Did you start losing pressure? If i introduce soap, my pump stops working.
@jarrodcannon27912 ай бұрын
I lose pressure when I turn the chlorine on
@properexterior2 ай бұрын
Then there’s an issue with your plumbing on the soap line. Assuming everything else was followed in the video And the pump runs perfectly on water usage.
@midlifemike49162 ай бұрын
@@properexterior that's what we were thinking. Thanks for replying!
@properexterior2 ай бұрын
@@midlifemike4916 Text me some pictures 904-999-8087 I’ll help you out
@josephdufresne29422 ай бұрын
Great video! Where can I buy the ar-45 (like in the video)?
@properexterior2 ай бұрын
If you live near Jacksonville we can get you one local. Otherwise I would send you to north Georgia airless
@josephdufresne29422 ай бұрын
@@properexterior can it be shipped? I live in San Diego
@properexterior2 ай бұрын
@@josephdufresne2942 North Georgia airless would be able to help you out with that if they are able to ship to California I prefer to only do local transactions when it comes to equipment like that
@josephdufresne29422 ай бұрын
@@properexterior understood! Thanks! Curious, is there anything I would mention to them regarding a set up like yours? Or does it come standard?
@sterlinghousewashpressurew95942 ай бұрын
You have my rheo knee on the logo, love it. We have to show these 2 good leggers how it done. 🦿👊
@ELEVOPR2 ай бұрын
Do you do pro bono work? I have a 23x11 for you 😂😂 Good Stuff Thanks for sharing.
@havalyounis1492 ай бұрын
I am considering setting up a pressure washing trailer and would greatly appreciate any guidance or assistance you can provide. Your expertise online would be invaluable in helping me navigate the process. Thank you in advance for your time.
@akutan224b3 ай бұрын
Airborne All The Way! Bco 3/504 and HHC 1/504 1992-95
@user-wu4be5ve4h3 ай бұрын
Assuming you really liked the Kings reels best because you chose to use 8 on this build?
@properexterior3 ай бұрын
Customer provided 4 manual reels and we matched it to make everything look good. On my channel I have an unboxing between the two brands. They’re identical, pretty much same price and perform the same. It all comes down to what your stores stock and what you can get your hands on. I have 6 reels on my truck and 4 of them are titan
@josegutierrez91133 ай бұрын
Wow nice video
@essentialmaintenanceservic46823 ай бұрын
Man! That's pure BEAST MODE!! 😮
@blueshieldpowerwashingfl3 ай бұрын
Thank you for your service dedication and love for our country
@SgtSnipey3 ай бұрын
Will there be a detailed walk though would love to see the full build?
@properexterior3 ай бұрын
There will be a DETAILED walk around video in the near future! We recorded one and the lighting / environment was not in our favor -_-....
@TScott-vp9zv3 ай бұрын
It’s so amazing how similar our paths are! Like you, I’m a veteran, I was an S&C coach, and now I’m in the PW industry! Much success to you on your journey! What an inspiration you are!
@properexterior3 ай бұрын
Thank you for your service #merica
@havalyounis1493 ай бұрын
Are you selling it?
@properexterior3 ай бұрын
So we built this one custom for a customer! But we are able to build and sell this trailer. Identical to this one would run around $48-52k depending on the amount of electric reels. 4 manual reels / 4 electric would be at $48. 8 Electric would be at $52. We can also add / remove anything you'd like!
@havalyounis1493 ай бұрын
Can we tie it in with the drone?
@havalyounis1493 ай бұрын
I want a pressure wash to attach a drone Do you have it ?
@properexterior3 ай бұрын
@@havalyounis149 yea you can tie It in with the drone for sure!
@properexterior3 ай бұрын
@@havalyounis149 we can definitely get you one setup!
@northjerseykevin39153 ай бұрын
I’m a carpenter by trade but have been eye balling a used 2013 F350 diesel with a aluminum flatbed and plow on it. I envision / fantasize about turning it into a soft wash truck. Thanks for your service 👍🇺🇸
@Flasoftwashprollc3 ай бұрын
😎🤙🏆🏆
@properexterior3 ай бұрын
If you’re up near jax, I can invite you to our local group ;)
@johnthe_don3 ай бұрын
Why does my ar 45 have a valve on the supply to reel and yours doesn’t? Im trying to install mine and that valve is in the way because i need that yellow hose to go upwards.
@properexterior3 ай бұрын
I got rid of it, it’s a major flow restriction and it’s not necessary for our industry. You can remove it! Then just get a 3/8” male pipe thread x 3/4 or 1/2” barb for your output hose to the reel! North Georgia airless also has these adapters in stock!
@johnthe_don3 ай бұрын
@@properexterior thank you brother 🙏🏻🙏🏻
@omarmontesdeoca16723 ай бұрын
Why do I think it's a good idea is better to bring a large tank than several small ones?
@properexterior3 ай бұрын
We are running 20 gallons per minute. On average with three different machines. Small tanks won’t keep up with what we are doing.
@omarmontesdeoca16723 ай бұрын
Regards How much is the gallon capacity of your water tank?
@properexterior3 ай бұрын
525
@ivorybailey52894 ай бұрын
Thank you for your service! As someone that’s new to the business, you’re an inspiration. I hope Austin can build my next rig.
@samgan17284 ай бұрын
This is such an impressive machine that I ever see. BTW, we really like the idea to use so many hose reels since we make similar ones and sell to US.
@properexterior4 ай бұрын
Thank you so much, this trailer is used on a specific job that requires stretching hoses a minimum of 300ft up and over a roof!
@crystalclearwindowsllc4 ай бұрын
May you always have alot of work to justify that much equipment
@properexterior4 ай бұрын
This customer has one contract that is triple the amount of the trailer. It’s a yearly contract!
@crystalclearwindowsllc4 ай бұрын
@@properexterior thats awesome
@michaelc72834 ай бұрын
That's a cool setup for a van.
@properexterior4 ай бұрын
Very minimal, but it definitely works. This build was a bigger headache than any other one I’ve done. Due to minimal room to move around and get things installed.
@michaelc72834 ай бұрын
@properexterior I bet it was, but now a lot of people who own vans can have a good idea on how to lay it out with the amount of space 👍.
@properexterior4 ай бұрын
@@michaelc7283 that’s the point of these videos, is to try and give people ideas of what can and can’t work! Stay tuned for one of the more recent builds, aluminum flatbed and 2 8gpms 😮💨
@JohannGambolputty224 ай бұрын
Thanks for this! Because of this video it made my decision easy to replace my asphalt driveway with asphalt. Only $60 a year to sealcoat that sh1t.
@properexterior4 ай бұрын
Yes, pavers do need regular maintenance! They're highly pushed as a "luxury" but require upkeep. This is a worst case scenario shown in the video! Not all paver projects are like this.
@elitewash5494 ай бұрын
Great video man!
@properexterior4 ай бұрын
Thank you
@chancepayne21914 ай бұрын
Where did you order the replacement from?
@properexterior4 ай бұрын
North Georgia Airless
@fredbear2nd5 ай бұрын
can you run gas soft wash metering valves without the remote on on/off switches?
@properexterior4 ай бұрын
Yes, you would just have to adjust manually. That’s not an issue at all
@jayvera44155 ай бұрын
What’s the strip material you use I’ve used the cobble strip from surface logic and haven’t had good luck with it still white haze marks after the cleaning.
@properexterior4 ай бұрын
Trident tidal wave gel!!! You may be experiencing a solvent based sealer, which is going to be brutal to remove
@joseperez10855 ай бұрын
Very nice
@CatfishLove5 ай бұрын
You are not getting 24 gal per minute out of those 2 pressure washers. The size hose you are using will not allow it. LOL
@properexterior5 ай бұрын
It’s 1/2” hose. Bucket test and a timer doesn’t lie.
@austinwilliams69076 ай бұрын
I like the ballvalve mount you have on the front of the reels, where did you find those?
@properexterior6 ай бұрын
So they’re basically just “broom” or “pole” clamps from Home Depot. Lowes sells them too I think they’re about $6 for two of them!
@properexterior6 ай бұрын
Home Depot sku: 568117 Correction, about $3.90 for two
@austinwilliams69076 ай бұрын
Thank you!@@properexterior
@DJGonzoNYC6 ай бұрын
I’m in Ponte vedra can I have your contact info ?
@properexterior6 ай бұрын
Proper exterior cleaning on Facebook 9043336000 [email protected] Thanks!
@prashanthmale49137 ай бұрын
How much does it cost for 560 sq ft - wet look pavers
@properexterior7 ай бұрын
Depends on multiple variables in order to achieve an accurate price. In our region we see from $1.50 to $1.85 for most “new install” not previously sealed pavers. Any job that has been previously sealed requires in person testing, examination and other necessary information before deciding if it’s something we want to take on and then at that point we can provide pricing. Typically those start at the higher $2.75 per square foot and go up from there. In some situations the pavers will have to be replaced. *highly uncommon*
@kevinprice79237 ай бұрын
What ball valve are you using? How can I build one/buy ty!!
@properexterior7 ай бұрын
Hydroseal 1/2” threaded ball valve with a 1/2” Mosmatic swivel. Amazon sells the ball valve. Kleen rite sells the swivel Let me know if you have any other questions!
@christopherdodson3237 ай бұрын
Why did you take off the factor outlet valve? Can you do this process with the factory one on? Thanks
@properexterior7 ай бұрын
It reduces flow quite a bit. I HIGHLY recommend removing it. It’s the same exact process, all you do is take the black plastic piece off and keep the valve open when priming.
@christopherdodson3237 ай бұрын
Can you show a quick video short of how you have it set up? Thanks
@christopherdodson3236 ай бұрын
What fitting replacements did you use on the pump going to the hose reel? I would like to do the same with removing that valve. Thanks
@properexterior6 ай бұрын
@@christopherdodson323 it’s a 3/8” mpt x 1/2” fpt fitting. Then a 1/2” mpt x 3/4” male barb with three-quarter inch hose
@christopherdodson3236 ай бұрын
@@properexterior and the top is just a 3/4 check valve to 3/4m x 3/4 barb?
@danielcwiok26317 ай бұрын
What pump is that?
@properexterior7 ай бұрын
Remco 1.0 gpm pump!
@RevitalizedExteriorServices3 ай бұрын
@@properexteriorI actually just bought this pump when I was making my own sealer bucket lid and I’m having some issues with it not wanting to prime correctly. I know with some soft wash pumps there’s an Allen key slot where you can adjust the pressure but this one only has a screw. Does that screw at the head of the up pump adjust the pressure? I didn’t want to mess with it and break anything. Also what blue hose is that?
@properexterior3 ай бұрын
@@RevitalizedExteriorServices so under that screw is the pressure switch screw. Thats just to hold the cover on. Also air compressor 1/4” hose. Cheap easy to replace and has crimped ends. As far as priming goes make sure the arrows pointing in the right direction. It should prime instantly
@RevitalizedExteriorServices2 ай бұрын
@@properexteriorwhat exactly do you mean by crimped ends?? I’m not too mechanical savvy. I tried looking it up and got varying results. (Since I have left the original comment in pretty sure I figured it out I think it was a matter of wrong size tip and maybe some lackluster thread taping job…. What tip are you rocking? I’m using the chapin brass spray tip from my chapin xtreme 3.5gal industrial sprayer if you’ve ever messed with those works pretty good) Where from do you get that hose? I thought it looks good because it’s doesn’t look heavy and stiff looks very lightweight and malleable. Thank you, though I love the vids very informational and professional.
@brianb43907 ай бұрын
You have to do this every morning?
@properexterior7 ай бұрын
If you want accurate ratios, yes
@krispykleanpowerwashingllc16428 ай бұрын
When check valves go bad on a Ar45 what does the machine do. Mine has stopped pumping water
@properexterior8 ай бұрын
It will shake sporadically, not spray volume, low pressure. Your pressure gauge will also spike from 0 to 300 0 to 300 0 to 300 multiple times.
@adamejose64758 ай бұрын
Can you make a video on how to delete the gas tank off the small engine and connect it to the bigger tank
@properexterior8 ай бұрын
Yes it’s on the list of upcoming videos for this year!
@MikeyAR73737 ай бұрын
Just remove your gas tank and the fuel line running to the carburetor or to the fuel pump depending on what motor you have and then run a line from the big gas tank to your carburetor or your fuel pump.
@jasontenney27868 ай бұрын
In the process of building my trailer rig and did hrs of research and purchased the AR 45 great content just waiting on my remote rinse to come and can finish plumbing my AR question regarding the clips that hold the discharge and gauge do u ever experience them vibrating off and if so what did u do to stop it also i noticed u have a check valve on your bypass is it necessary like the comet p40 also my pump is the nrwer model it they did some changes the bypass is now a 3/4 barb not elbow the outlet is 1/2 barb poly no ball valve no drain plug on the bottom of outlet manifold and they got rid of yhe gauge i had to order the gauge separate thanks for the video
@properexterior8 ай бұрын
Hey there glad to hear, as far as the clips go I have never had an issue with them vibrating out. They are actually quite a pain to get out. As an extra precaution, you can take a zip tie and zip tie it to the manifold if you really feel it’s necessary. The check valve in the video is just a adapter for threads. As the regulator threads have stripped out for me with every other three-quarter inch fitting, I’ve tried to put on it. The check valve seems to fit on there perfectly and then gives you nice clean three-quarter inch threads to put your fittings on