Bit late to the party but does this work on brake lights also?
@edijzerman58802 ай бұрын
Whe like to sse the wheel turning at higher speeds
@TheDroneWarrior2 ай бұрын
That is as fast as the balancer spins. The load cell can weigh the wheel and work out if weight is needed from just a few spins at that speed
@edijzerman58802 ай бұрын
@@TheDroneWarrior i have this balancer but in my eyes it works not as it should.
@user-rj9ws7hr3u2 ай бұрын
Who would buy such crap and believe in it? it will defenetly increase fuel consumption..
@BentRodExpeditions2 ай бұрын
Does it even sound like a turbo lol 😂
@jonathangaytancontreras81643 ай бұрын
Jajaja ... Yaaa muchas gracias señor random de q hacía videos hace 8 años en KZbin le debo muchos ecos de sangre q no gastaré comprandp cosas q tenía ahi mismo XDD
@mikecooper39045 ай бұрын
Will this work in mk4 Jetta as well?
@TheDroneWarrior5 ай бұрын
Yes it will. Just check the pin layout
@mikecooper39045 ай бұрын
@@TheDroneWarrior worked like a charm. Thanks for the reply
@juicyjoye5 ай бұрын
You posted this video a year ago and it's still the only one that shows how to get it done. Thanks again.
@juicyjoye5 ай бұрын
Simple is always the fix! 👌🏾
@ILLBEDRONED5 ай бұрын
Same problem on my V2 goggles. Random as hell!
@anon55005 ай бұрын
Sadly this is a problem when amateurs not trained post videos on KZbin (sorry mate!) but the belts on the wrong damn way around!!!! The ribs on the belt are designed to go inside all pulleys…… if you’re not sure check with an actual trained technician not KZbin so you DO NOT make this mistake!
@TheDroneWarrior5 ай бұрын
Don't be that guy. There are ribs on both sides of the belt as it goes over some pulleys and under some others. It is installed 100% correctly. I'm assuming you are an amateur mechanic or you would have known that.( Sorry mate!)
@1ternityMind6 ай бұрын
Walk past it so much that I never noticed. Thanks mate, now I can actually use my other stuff
@dukaschmichmol8636 ай бұрын
Did you try to print props with a UV-resin 3Drinter?
@Floppafanandvocaloidfan7107 ай бұрын
I know I’m late but, you’re in Joseph’s region. It doesn’t need resistance points that’s why it’s like that.
@ryanblumenow7 ай бұрын
I hope you can maybe help me. I am trying to connect my Thrustmaster TS-XW to my PS4 with the Drivehub. I connected the cable to the PS4, plugged in the USB for my wheel. When I plug everything in the wheel is recognised (it calibrates and spins) and the led screen says something like “TS-PC E” after doing the figure of eight pattern. But that’s it. The wheel doesn’t show up in any game (Project Cars 2, GT Sport, or Driveclub) and I can’t use it. The controller is off when I plug everything in (and wheel is recognized) and then game forces me to turn it on to continue but with controller either off or on the games don’t see the wheel. I've tried setting the controller setting to Bluetooth as well as USB, nothing is working. Any ideas?
@user-cb6sj4ub5n8 ай бұрын
So does yours spin by itself
@juicyjoye5 ай бұрын
It will. Because Grand Turismo is a Simulator and race cars are super sensitive so it response to every bump in the road it really never stops when driving. 😮🤓😁
@leemilborrow38738 ай бұрын
Can you use any resistors? Or does it have to be the ones in the video
@spacemole8 ай бұрын
what is this sticky pad?
@TheDroneWarrior8 ай бұрын
The sticky pad/battery pad is available at all drone suppliers. All different makes and normally comes in a large rubber like pad, that you cut to size. The special material grips to the battery like a cross between velcro and chewing gum while still being able to easily remove the battery. But always still use straps!
@adrianfijakowski95999 ай бұрын
Czyżbyś był z Polski?
@TheDroneWarrior9 ай бұрын
Nie, przepraszam, jestem Anglikiem. Dlaczego pytasz?
@adrianfijakowski95999 ай бұрын
@@TheDroneWarrior na początku filmu powiedziałeś "koromyslo" i tak mi się skojarzyło.
@TheDroneWarrior9 ай бұрын
@@adrianfijakowski9599 Czasami zapominam i zmieniam język lub używam słów z różnych krajów. Co dokładnie oznacza koromyslo, więc wiem.
@shewasask8erbratz10 ай бұрын
This is actually kinda creepy, like some kind of "world donination" thing
@shewasask8erbratz10 ай бұрын
I saw this goodness knows how many years ago and just randomly thought of it a few days ago, and here i am
@mamatbard306811 ай бұрын
put it in front of the air filter, not after the air filter.. if the blade is damaged, the air filter becomes protective and goes into the engine.
@miguelnuno9807 Жыл бұрын
This is blasphemy
@theamazinggoldfish8713 Жыл бұрын
So does this give you More ho, better fuel economy or, engine problems?
@rainninja2176 ай бұрын
Fuck no shit dont work
@rosieclark36614 ай бұрын
No the electric ones do though
@rainninja2174 ай бұрын
@@rosieclark3661 boy what
@Golden_Risuto Жыл бұрын
Thanks!
@unknw51 Жыл бұрын
Whats mean increase yellow bar for angle mode ? My drone parameters yellow bar left side and short on the angle mode.
@dankdankeryetdanker2726 Жыл бұрын
Look at how smol
@ninja36inc Жыл бұрын
Useless there's no vents on the bottom and blowing air on the plastic don't cool anything you just made it hotter by powering the fan from the PS4 PSU none of the air is going to the apu or heatsink don't waste your money on external fans people just open it up and clean the fan and heatsink if the PS4 is running hot
@TheDroneWarrior Жыл бұрын
Couldn't agree more. This stand/fan is useless. Proper maintenance is the best way to keep your PlayStation cool and working at its best.
@ninja36inc Жыл бұрын
@@TheDroneWarrior yes the back mounted fans are exhaust so no air going inside the bottom fans can't get air in the bottom plastic and the vertical stand with fans can get air in but still useless
@richardscots-ep4yf Жыл бұрын
how much the price difference of real and fake?
@TheDroneWarrior Жыл бұрын
Generally the proper ones cost between $7-$10. The fake ones sometimes cost as much or more, but usually are slightly cheaper.
@TheDroneWarrior Жыл бұрын
I have noticed due to demand and small supplies of the proper one, prices are on the increase and may cost between $20-$50
@jmdds Жыл бұрын
Don't even bother as real or NOt would not make any difference.
@richardscots-ep4yf Жыл бұрын
do you have link to buy online for the real one?
@jmdds Жыл бұрын
Don't even bother as real or NOt would not make any difference.
@rainninja217Ай бұрын
@@jmdds lol ur on everyones ass
@20robob Жыл бұрын
Very helpful video sir! I replaced the left front arm with care and confidence after watching this video! Thank you and I just subscribed
@grego13800 Жыл бұрын
Bulll shiiittt
@neal6473 Жыл бұрын
Where do you buy the real ones at sir?
@jmdds Жыл бұрын
Don't even bother as real or NOt would not make any difference.
@tyanderson3359 Жыл бұрын
Where do you get the real thing from
@jmdds Жыл бұрын
Don't even bother as real or NOt would not make any difference.
@rainninja2176 ай бұрын
@@jmddslet them fuck yup their cars lol
@sirmaggot2020 Жыл бұрын
Thank you so much. I can now access my bone powder
@hal9000user Жыл бұрын
Tried your mod. These little rumble buttons are quite noisy. Can't really feel them rumble too well either. Still like the concept though.
@TheDroneWarrior Жыл бұрын
I agree they can be a little noisy. That's why you have to stick them down well. I don't know what rumble buttons/cell you have used, but the ones I use work really well. The vibration is quite strong but ultimately depends on the game. The cell should be inside the trigger for full effect.
@hal9000user Жыл бұрын
I'm going to put them inside some old nes controllers and give them some much needed oomf!
@Nismoleb89 Жыл бұрын
I don't get it. The logitech works without the drivehub with ps4/ps5?
@aldrinallynalmario2867 Жыл бұрын
Thats for laptops😂
@crank_FPV Жыл бұрын
Awesome! I’m about to put a usb c plug into my FC plug and then goop it over it so I can pull the plug and reapply if I need to mess with my settings. Thanks!!
@TheDroneWarrior Жыл бұрын
Exactly how I've done it.
@crank_FPV Жыл бұрын
how come you didnt just leve the usb c port open and seal arouynd? just wanted most waterproof you could get it?
@TheDroneWarrior Жыл бұрын
Yup. Didn't want to have to worry about anything. The usb on the FC needs to be sealed and I have heard that the air unit usb will corrode if powered on and open to water. Check the next video to see the first of the waterproof testing.
@gavancorrigan8813 Жыл бұрын
Thank you for this. Saved me 25 quid buying that Hori controller on Amazon. Weird though that my PS5 communication method is set to fuse Bluetooth and it’s still working 🤷
@smhorse Жыл бұрын
I noticed that, on your demo video, your upper brake LEDs still show a slight glow, even though the brake pedal is not pressed. Is there a leakage current in the system and does it trigger any "engine workshop" warnings? I'm trying to fix this type of error in a 2003 Bora TDi.
@TheDroneWarrior Жыл бұрын
It's really easy. If you install LED brake/tail lights and that glow bothers you or causes an error, it needs a resistor. This can also be installed in the same way using the test pin method. Just put it between the correct live and earth as in the method in the video. I do not know off hand which is the brake/tail light test pin. Easy to trace and find, test with a meter.
@TheDroneWarrior Жыл бұрын
Also, it's normally the indicators that cause random check engine light issue, not the brakes
@smhorse Жыл бұрын
@@TheDroneWarrior : many thanks. I've managed to find a photo of the front and back of the Bora bulbholder, so hopefully just a matter of tracing the contacts....
@smhorse Жыл бұрын
@@TheDroneWarrior : just an update to thank you again. I have connected a 50w 10 Ohm resistor between the "BR" and "31" pins on both of the Bora's tail bulbholders. Can confirm that this seems to do the trick, eliminating the glow plug warning and the "Engine Workshop" message on the instrument display! Remarkable! 👍
@TheDroneWarrior Жыл бұрын
@@smhorse Glad I could help.
@carcommunity2418 Жыл бұрын
I’m on ps4 and I can’t find the accessories
@jefflo455 Жыл бұрын
scams hahahahahahha omg wait till it breaks and get suck to your engine
@TheDroneWarrior Жыл бұрын
Depends how you use it. If used pre air filter It would be fine if something were to happen. Also that is the whole point of this video. There are loads and loads of knock offs that can be hard to spot. The proper genuine one works as described and has no issues. It is properly balanced and spins really easily and smoothly. I have used a genuine one for over 5 years with no problems and I do get it spinning fast!
@ryzebol765 Жыл бұрын
did you coat the electronics/ water-proof the electronics yourself. Or does it come like that. great video though. Don't know if I would risk flying in the rain as someone who's new to the hobby. Just ordered the DJI O3 version of the nazgul. will be my first 5 inch drone. practice this whole year with the 73mm tiny whoop nazgul and simulators.
@TheDroneWarrior Жыл бұрын
Yeh I waterproofed everything myself. Check the waterproofing video in the link. Simple enough. Flying in the rain is fine. If you can fly well then there is no issues. Mainly doing manoeuvres to get the water off the lens. Will be flying into and back out of a lake soon (if this stuff works. Lol)
@Valentin-jx9rs Жыл бұрын
Hey did you coat your o3 or not ?
@sibriers5254 Жыл бұрын
Looks great, where can I find those green prop nuts? Do you have a link please? Would love to waterproof my nazgul F5 but I'm too nervous to do it.
@TheDroneWarrior Жыл бұрын
Coloured alloy prop nuts are widely available. EBay is great.
@clembot808 Жыл бұрын
How did you label your arms with your contact information and registration number? Looks super clean
@TheDroneWarrior Жыл бұрын
I checked on ebay. Found a seller who had different colour text on a clear label. Ordered in 6mm so it would fit on the side of the arms and white so it would show up well.