VideOG

Пікірлер

@zizzu_moha9206 Ай бұрын

Where did u buy the plastik gear u replaced?

@wujekdamian5922 2 ай бұрын

But how to change the gearbox filter from inside?

@garengtutorial8923 3 ай бұрын

Bagus

@hereusethis 6 ай бұрын

my gears are fine but the shaft is binding. Not sure if there's corrosion on the bushing or what. I'm unclear what's happening when you drive out the shaft. My non-gear side has a metal cover or seal over where you'd drive out the shaft. Does that have to be drilled out? And then what about the shaft bushings, spaces etc.? Is it as simple as it looks in the video? Can all those parts be reused? Than you!

@hereusethis 6 ай бұрын

update: Shaft and throttle body were clean but binding in a couple spots. After a full day/night Kroil soaking (and occasional manipulation of the shaft), it freed up. I lubed it well with synthetic oil, added the flap back (fyi, the two bolts holding the flap the shafte are M3 with a weird head. They're loctited on (red, probably) with light peening of the threaded end after it comes through the shaft. When I removed them, one sheared off and I had to drill it out. I replaced it with bike derailleur b-tension screw I had in my parts bin. I used locktite and peened them once in stalled (you do not want this this screw backing out and getting sucked into your intake!). We'll see how it this goes and how long it lasts.

@radioauto4423 7 ай бұрын

Good job 🎉

@davidram25 7 ай бұрын

Ey man I'm trying to locate that chamber in my 2015 RENAULT Megane and I cannot find it anywhere

@ilchejovanovski4455 10 ай бұрын

i have 406 coupe 3.0 liter with this transmition automatic and gearbox not changing second gear and suddenly car stops all wheels blocked what can be the problem i change the oil 10k kilometer ago please help

@jeandesy74 11 ай бұрын

what happens with the torque convertor?you dont fix?

@zsoltibitter8761 Жыл бұрын

how easily should the valve move? I thought it can be pushed VERY (this "VERY" is important here :D ) easily by hand and after disassembling my faulty valve i found that i have to apply quiet a force to move it. It opens/closes smoothly, i can feel and hear the mechanism inside how smooth it is, i just have to apply a lot of force to move it. Is it normal or is it a sign of fault? Is it possible to measure the motor somehow if it is good or not? (by multimeter on the pins?) Thing is that i am not a mechanic. But mechanic had to replace this part in my car (he did not play with it since he does not have time to play trying, he just replaces and goes on) and since its quiet expensive part i took it home and just cleaned it, removed a lot of carbon stuff and wanted to inspect if it could be repaired - or maybe the cleaning was enough, but i cant try it in any car (since i am not a mechanic and dont want to mess with my car). I have removed the four screws but its still holding near where the black connector is. I was afraid i break something but its the same valve as yours and according to your video there are no other screws so i might have to try harder :)

@hereusethis 6 ай бұрын

i forced mine and broke the white locator pins (for the electrical connector). I hoping they're just "locators" and won't cause any real issue.

@samirmemmedli6920 Жыл бұрын

Can anyone help, where is transmission oil cooler located ?

@sosibamkiva2370 Жыл бұрын

good day, can you help me, my car PEUGEOT 307 Automatic (AL4), when i shift gear to drive or reverse it doesn't move, instead it write " INFO PLACER BOITE" i don't even know the meaning of that, can you advice me

@voornaamachternaam5745 Жыл бұрын

IS THIS SCENIC 1?

@ezziiahsan8429 Жыл бұрын

If u replace the throttle body do you need to recalibrate it?

@SlobodanPijunovic Жыл бұрын

gde se moze narucit zupcanici

@mirkonija1983 7 ай бұрын

Nemoj bezveze da bacas pare, ja narucivao i metalne i plasticne , ma nema sanse da ih uklopis da rade savrseno, i na kraju kupio novu drosselklape .

@SlobodanPijunovic Жыл бұрын

gde se moze narucit zupcanici

@omarrejopachi4583 Жыл бұрын

Where I can buy the repair kit?

@thetruth6992 Жыл бұрын

EBay

@erions20plus53 Жыл бұрын

Hello I have the same gearbox but I have a problème where is the filter of the gear box thank yoy

@yaroslavpr518 Жыл бұрын

Schade, dass nicht so leicht w212, e250 man es reinigen kann!

@sigsauer8386 Жыл бұрын

A rimettere il tubo di gomma che da impazzire 😂

@JuanAntonioOchoaPadron Жыл бұрын

De cuanto es la resistencia que debe tener los solenoides o electroválvulas?

@will29am Жыл бұрын

1.2 a 1.5

@hubertgruber9516 Жыл бұрын

What were the symptoms of a damaged gearbox before the replacement?

@tb6539 Жыл бұрын

hi hope you can please help me i have a 2003 citreon 1.6 automatic with the AL4 box on only done 33,000 miles and has passed every mot i was getting a slight nudge when selecting reverse or drive an auto specialist garage said needs a range switch and input sensor and recalibrating at cost of £600 ? but also said this may not cure it and may need a new ecu which you now cant get ? i had the oil changed and the oil was black but with no contaminents in ? this seemed to improve the box however once you drive say 20 miles im now getting a clunk when going from 1st to 2nd rest are smoothe changes but theres quite a clunk and nudge worse than before ? theres no fault coming up on dashboard and does not go into limp mode !! Acompany called 3d transmissions said over the phone i will need a reconditioned box at a cost of £3000 plus vat which is way out of my budget as im retired and on disability benefit due to long covid i really want to keep car as its just passed mot had a full service and had the timing belt and water pump replaced so if any one can help me with advice i would be truly gratefull i enjoyed the video thought it was very informative please help thankyou regards terry

@ra-moonluis Жыл бұрын

Looks amazingly!!!

@ra-moonluis Жыл бұрын

Very nice work Guy's!!! I percibe needs colimate a little bit 🙏🙏🙏🙏

@Harinathm2008 Жыл бұрын

PLEASE ADVISE. I replaced the solonoid as per this video.firet try I haven't done manual valve properly.started no gears. Then I re done with manual valve. Now gear enters and then engine stops when realese the breake. Can you please advise any cause?

@styx7989 2 жыл бұрын

Really not the good process for repaire a Gearbox

@SteinarPladsen 2 жыл бұрын

Mine A5 2,7 went into LIMP mode, and have this P0638 fault code - and some others. Can the Throttle body fault resault into the Limp-mode? Tnx

@mohamadmustafa6925 2 жыл бұрын

Thank you very much.

@vincentdaniel3326 2 жыл бұрын

Hello, it's possible to interchange the AL4 Peugeot 406 automatic transmission with a more reliable automatic transmission?

@endurodeminas9944 2 жыл бұрын

Bom dia amigo qe lente é essa

@amir-khanengineer 2 жыл бұрын

kzbin.info/www/bejne/b4vTnoaNbKaelac

@miguelvarona4511 2 жыл бұрын

How many time did you spend?

@mohamadmirza31 2 жыл бұрын

Hello, is the oil for the semi-automatic gearbox permanent or does it need to be replaced and does replacing it cause a problem

@guitarbytes Жыл бұрын

You need to replace it.

@Blogv 2 жыл бұрын

is this for faulty codes like P1710, P1167. I have been with a jerking, blinking of S, * in dashboard plus alarm sound, then, ENGINE WITH LACK OF POWER. pedal to floor and does not accelerate, the only solution at the moment is to shutdown and restart engine. I did a scan at the moment when this happened to me, and the faulty code were the P1710 and P1167. thanks

@dilyanavasileva3800 2 жыл бұрын

I had issue with solenoid valve pressure regulator and at the garage at Preston they declined they can change just valves. Sold me a whole block, which appeared is refurbished in French factory charged me 750 pounds for the refurbished block and 150 vat, 900 in total and didn't allow me to keep my old block as they had contract to return them to be refurbished or if I need keep my part the 750 was to go more..

@juliosuarez7204 2 жыл бұрын

Excellent thanks for the help

@gbtbuecolit9786 2 жыл бұрын

How long did the fix last? Cause I heard the problem came again after 50k till 80k KM

@juanvillamarin3663 2 жыл бұрын

Thanks You!!!

@nickgeorgie1957 3 жыл бұрын

Thank you so much. Great job, greater guy. Thumbs up. Both hands.

@АндрейЗгурский-и4ц 3 жыл бұрын

Какое сопротивление должен показывать соленоид

@adrianmarczak7848 3 жыл бұрын

I have a problem after replacing the solenoids, the car goes forward in the R position. In position D it also travels forwards.

@Kaiserzeit1871 3 жыл бұрын

Does not the oil have to be checked at a certain temperature? How much degree does the oil have to have? Muss das Öl nicht bei einer bestimmten Temperatur geprüft werden? Wieviel Grad muss das Öl haben?