Hi! Here's some info about that mod. cet3d.top/proto36-rc-car-posts/proto36-body-support-bars/ You can slide the bars through the TPU printed support piece. You can cut the aluminum bars wherever you need them depending on your case/body. Regards!

Hello! The truth is that this project was done with boolean operations in rhinoceros and there are no parametric CAD files as such. On the other hand, that 608 bearing does not fit in the axle part of this MOD, it is too big, I could only use it in the gear mechanism of the original version. Even so, the bearings I used are easier to get than modifying a non-parametric project. I'm sorry I can't help you more with that but the nature of the project complicates that issue a lot. Thank you very much and best regards!

code.google.com/archive/p/unojoy/downloads

Hi, if the battery fits then it would be worth it. I have used 3S 60C with 60A and 80A ESCs, 120A would work but I don't know for how long or what will be the first thing to break. It's something I'd like to try one day, it will undoubtedly be quite fast.

@@cet3dprojects Thanks 👍

Hi, thank you very much! This mod was already made by the user Historiker and it is on thingiverse, here is the link: www.thingiverse.com/thing:4656142 I have also seen some knobs for this issue on Aliexpress, I personally use ETS2 with lower speed gearboxes. Regards!

Hi, thank you very much. Unfortunately I don't know how to connect it to a tablet. In principle it is for use on a PC but it should be possible somehow with an adapter. Greetings!

I'm Sorry, my english os not good, I mean How can I attach to the table haha I'm so Sorry, I wrote It wrong.

​@@DesignerInterativo aah ook no problem hehe, in that case, the base has two holes that house nuts for M6 screws, this system is used to adapt it to a low table, to adapt it to the steering wheel table, you have to look at the "remix" section of OSSH on thingivers, a user designed a support of this type, if it helps you also leave him a like to support him. Thank you very much for being here!

@@cet3dprojects Aaah Ok. Can you send me the link this project a user designed? Thank you very much =)

@@faladuuul www.thingiverse.com/thing:4641661 Thanks to you!

Hello! Thank you very much for trusting the project, I hope everything works well for you and you can enjoy it. I don't know how the PLA+ holds up but you can always change some parts, that's the good thing about DIY projects, very grateful, greetings!

Hi! So far I've only tried these, which are 70mm between screws, with M3 screws. I've seen some shorter options on Aliexpress but they tend to be stiffer springs. Thanks for visiting me and best regards!!

@@cet3dprojects in the end I went with Carson shocks with 62 mm because the Toyota Supra Rocketbunny body I was using would have been too high otherwise, and it looked really good. The ones with 55 mm would have been too low.

Hello! Sorry for the delay, I'm not being notified of some comments properly. Thank you very much for trusting my projects, very grateful, I hope to share more soon and I hope you like them. Best regards!

Use ABS

I used PET-G for everything

Hi, sorry for the delay, I didn't see the message before. First of all, thank you very much for trusting the project. Just a few months ago I lent the car to my nephew to learn and he broke the suspension arms even in PETG. I designed some to print with TPU with a thicker design so that they are not so flexible and they give very good results, I have to upload them soon to thingiverse, if you need them before send me an email and I will send you the STL. Also as the colleague says, if you have a printer valid for ABS or Nylon it would also be a good option, I am in the process of looking for one. Thank you very much and I hope you can continue enjoying the project, greetings!

Grazie mille, un grande saluto!

Hola! Perdón por la demora, no me notifican bien algunos comentarios. Las de 260mm entre ejes y 200mm de ancho son las apropiadas. Este chasis tiene una medida fija de batalla. Un saludo!

Твои проблемы)

Bueno, normalmente no es muy difícil conseguir una a día de hoy, hay modelos muy económicos.

Hello, I have fixed some links, if you need something that you can't find, don't hesitate to comment and we will look for it. Thanks for the support, greetings!

@@cet3dprojectsHi, I have Problems to order the parts C6, C7 ans C8, when I Click on the link there Pop up a window which says, that the Parts aren‘t availabe at my location. Greetings from Germany

@@lennart1710 I understand, in that case you have to look for a seller who can sell it in your country, you can see the code of each of the pieces in their link. For example, the C6 is 11184, and if you look for it from your country, I think there will be sellers for your area, since they are very common pieces, you will have no problem finding them, greetings!!

@@cet3dprojects thanks for the quick reply

Thank you for trusting the project!!

Thank you for trusting the project!

@@cet3dprojects It's going to be a long range FPV vehicle. When I say long range I mean by several miles:)

@@cet3dprojects There's new remixes/modded parts for your kit. I just printed the shorter bumpers.

@@kwattro76 Wow! It is somewhat risky to do that with a car, since it could get stuck due to some circumstance of the terrain or who knows what could happen haha that in my country would be complicated but if you can record it for KZbin it would be surprising hehe

@@cet3dprojects Ill know all of the paths and they're all open outside of the city long parks and around some of our lakes. There's a guy on KZbin who has a truck that he uses to buy stuff from his convenience store. He has a locked case with money in it with his camera that allows him to see the store and a servo that opens a cash box.

Hello again, the chassis has a wheelbase of 260mm and a width of 200mm, it normally adapts to 1/10 bodies but quite wide cars, pickups, widebody cars and things like that. On the channel I have a short that I recorded using a Porsche Cayenne body. You have the body mounts in my thingiverse profile.

Thank you very much for your interest, I hope you like the assembly and operation of the chassis, greetings!

thank you so much!😅

muito obrigado! Fico feliz em ler isso, espero que gostem de como funciona, a versão drift precisa de prática para dominá-la bem, mas quando você consegue é muito satisfatório, obrigado por apoiar o projeto!

Thank you very much, apart from fulfilling its function I tried to make it look a little pretty.

Hello, there was a problem with the hosting, it is now reestablished, thank you for trusting the project!

@@cet3dprojects biz teşekkür ederiz bize böyle güzel tasarlanmış proje verdiğiniz için

Hola @racadenas, si, hubo un problema con el hosting, ya esta solucionado, en la web tienes toda esa información. Muchas gracias por confiar en el proyecto!

@@cet3dprojects gracias por la respuesta, otra pregunta que body recomendarías lo digo por la escala

@@racadenas yo me fijo en las medidas normalmente, la batalla del vehículo (espacio entre eje delantero y trasero) son 260mm y la anchura es de 200mm en los dos ejes, lo que suele coincidir con carrocerias de 1:10 pero solo las mas anchas, modelos con widebody y cosas así o camionetas. Tambien pensé alguna vez ponerle una mas estrecha y hacer el widebody en 3d pero hay que tener tiempo jeje, un saludo!

Hello, there was a problem with the hosting, it is now reestablished, you have information about the project on the website. Thank you for trusting the project!

@@cet3dprojects man you are the Best! Thank you

Hello @dede-rt3jq, there was a problem with the hosting, it is now reestablished, you have information about the project on the website. Thank you for trusting the project!

Hello, first you must verify that the PC has detected the device, and in each game you will have to modify the button configuration and assign each button independently to each gear. In each game it is different. Thank you for trusting the project!

Hello @paulz.6632, take a look at the website that I have left in the description, you will find lists of components and assembly diagrams, the website was down for a few days due to a problem with the hosting but it now works. Thank you very much for stopping by here!

@julienl.8021 thank you for letting me know, there was a problem with the hosting, it is now solved, thank you!!

Yes that would be very nice, I already started to print the parts. I wanted to start now to source all parts and now the site is down 🙈

There was a problem with the hosting, it is now solved, thank you for trusting the project!

@@cet3dprojects yeah I have seen it already, thank you very much buddy for this nice design 🙏

Fixed, thanks for trusting the project!

Hola Eduardo, ya esta solucionado, hubo un problema con el hosting. Gracias por confiar en el proyecto!!

Hello @karsney, it is now solved, there was a problem with the hosting, thank you for trusting the project!!

Hello again hehe, site fixed!

@@cet3dprojects oh thanks

Hello @princecaymangaming9989, you have the link to the programming code in the description, it is a public code on Google. What I don't remember is how the Arduino was programmed, but there is a lot of information on the internet. Sorry for the delay, I've had a lot of work lately outside of KZbin. Thank you for trusting the project!

Hello ATILSAHIN, sorry for the delay, I already replaced the bushing link, thank you very much, greetings!!

Hello @eotech_0390, take a look at the links I have in the description, there is a list of components for this project, thank you very much for stopping by here, greetings!!

Hello @kisiekpl9516, I designed it thinking about the ease and resistance of PETG, but there could be more durable plastics although more complicated to print, I do not recommend PLA for this project. All the best!!

Olá, desculpe pela demora, estava ocupado fora do KZbin. Por se tratar de uma montagem de muitas peças, é conveniente ter a impressora bem calibrada e o plástico em boas condições de umidade, usei PETG e o projeto foi pensado para isso. A fibra de carbono PETG é possivelmente a mais resistente e fácil de imprimir ao mesmo tempo. Obrigado por confiar no projeto!!

Sorry for the delay, I was busy outside of KZbin. Thank you very much for trusting the project, I hope everything went well!!

Hi jac, sorry for the delay in responding, thanks for supporting the project. In the first video I uploaded about this chassis, I used an 80A esc and a 3900kv 3650, and it was a fast setup but keep in mind that the mechanical parts will suffer more, but it's really fun to run fast. You can also adjust something by changing the motor pinion.

@@cet3dprojects thx for respondind, i have bought extra diffirentials and pinion gears and all are steel, thx for the warning and lets hope i dont explode the setup

hi drakeblackk! Yes, take a look at the only short on the channel, it's a test of body support in difficult terrain.

@@cet3dprojects Hey! Thanks for the info, looks cool! I printed one car, but yet its empty :/

hello nofearaboutyou, you can use arduino uno or use the mod available for preconfigured boards, you have the video on the channel and the mod piece on my thingiverse profile. Thank you for visiting the channel, greetings.

Hi OsIT-id, good question, I don't know. I have only weighed it on several occasions fully assembled, and it weighs between 1850g and 2000g depending on what is mounted, bodywork, bumpers...

Hi ZePhilou, sorry for the delay! I'm glad you like it, thanks for supporting the project and visiting this channel.

hello ripmax333, sorry for the delay in everything, work doesn't leave me time for anything lately, I hope I can come back to continue improving this.

Sorry for the delay, I was busy outside of KZbin, I think I'm a little late hehe. Regarding the patterns in H you already have practically all the possible combinations in thingiverse, consult the "makes" section of the OSSH in thingiverse and you will find multiple modifications by users. That project is designed in rhino 6, I am currently learning to use freecad for upcoming projects. Thank you for trusting the project, greetings!!

I forgot something. Speaking about the piece C14 keeps falling out of its place, I don't know if it would be okay to give it a drop of glue. Thanks buddy

@@frange hola, muchas gracias por apoyar el proyecto! Es aconsejable calibrar la impresora lo mejor posible para evitar esos problemillas. Espero que puedas acabar tu chasis pronto con éxito. Con la pieza C14 ¿te refieres al hexágono del eje de rueda? Cuando pones la rueda ya no se sale nada. Si te surge cualquier problema en el montaje no dudes en comentarlo e intentamos solucionarlo. Hablamos!

@@cet3dprojects Hola de nuevo. Ya monté todo y le he puesto en marcha, es increíble verlo en persona la velocidad que coge y la estabilidad que tiene. Muy buen trabajo. He tenido que diseñar algunas piezas para cosas mías (la batería que tengo no cabía y lo he puesto en la parte superior en una especie de sarcófago que a su vez tiene para poner una cámara estilo Go Pro). Una duda, ¿ cómo puedo saber cuánta batería le queda ?. Saludos

@@frange me alegra que ya lo tengas funcionando, espero que lo disfrutes, que es lo que toca ahora. Supongo que para la batería habrá algún pequeño dispositivo de aliexpress que puedas conectar entre los conectores de la batería o algo así, yo personalmente lo uso hasta que se para, ya que la electrónica está preparada para no descargar al 100% las baterías y no dañarlas.

Fantastic subscriber!

thank you very much!