PROTO36 Assembly - 3D Print RC Car Chassis - DIY

[EN] All project information in the following links:
[ES] Toda la información del proyecto en los siguientes links:
General Information / Información General
cet3d.top/proto36-rc-car-post...
Component List / Lista de componentes
cet3d.top/proto36-rc-car-post...
Assembly and 3D Parts / Montaje y Partes 3D
cet3d.top/proto36-rc-car-post...
[EN] This project is shared for free, under a creative commons license. Its distribution and modification is allowed only under the same license. Its commercial use is not allowed.
[ES] Este proyecto se comparte de manera gratuita, bajo una licencia Cretive Commons. Esta permitida su distribución y modificación solo bajo la misma licencia. No se permite su uso comercial.

[@swooshjj]

Thanks a lot for sharing this

[@cet3dprojects]

Thank you for trusting the project!!

[@crissanderson9419]

grande progetto perfetto

[@FelipeSilva-zi9zv]

Muito bom o Projeto, meus parabéns, estou montando já com o Mod de Drift :D

[@cet3dprojects]

muito obrigado! Fico feliz em ler isso, espero que gostem de como funciona, a versão drift precisa de prática para dominá-la bem, mas quando você consegue é muito satisfatório, obrigado por apoiar o projeto!

[@frange]

In the end, you made the videos before I did. I had problems with my printed parts because they were rubbing against the gears and here I am, filing everything to make it work. I've already seen the full video, but let's see if I have time to finish my car. Thanks again. ERES UN CRACK !

[@frange]

I forgot something. Speaking about the piece C14 keeps falling out of its place, I don't know if it would be okay to give it a drop of glue. Thanks buddy

[@cet3dprojects]

@@frange hola, muchas gracias por apoyar el proyecto! Es aconsejable calibrar la impresora lo mejor posible para evitar esos problemillas. Espero que puedas acabar tu chasis pronto con éxito. Con la pieza C14 ¿te refieres al hexágono del eje de rueda? Cuando pones la rueda ya no se sale nada. Si te surge cualquier problema en el montaje no dudes en comentarlo e intentamos solucionarlo. Hablamos!

[@frange]

@@cet3dprojects Hola de nuevo. Ya monté todo y le he puesto en marcha, es increíble verlo en persona la velocidad que coge y la estabilidad que tiene. Muy buen trabajo. He tenido que diseñar algunas piezas para cosas mías (la batería que tengo no cabía y lo he puesto en la parte superior en una especie de sarcófago que a su vez tiene para poner una cámara estilo Go Pro). Una duda, ¿ cómo puedo saber cuánta batería le queda ?. Saludos

[@cet3dprojects]

@@frange me alegra que ya lo tengas funcionando, espero que lo disfrutes, que es lo que toca ahora. Supongo que para la batería habrá algún pequeño dispositivo de aliexpress que puedas conectar entre los conectores de la batería o algo así, yo personalmente lo uso hasta que se para, ya que la electrónica está preparada para no descargar al 100% las baterías y no dañarlas.

[@C2crazycardboard]

Awesome brother 👏👏👏👌

[@cet3dprojects]

thank you very much brother!

[@user-kz1vv8tl7x]

5am in france great job ;)

[@cet3dprojects]

thank you so much!

[@ValRC1]

Great video, what is the wheelbase and width of this car? Would love to build this and I want to check if any of my 1/10th scale rc body shells fit

[@cet3dprojects]

Hello again, the chassis has a wheelbase of 260mm and a width of 200mm, it normally adapts to 1/10 bodies but quite wide cars, pickups, widebody cars and things like that. On the channel I have a short that I recorded using a Porsche Cayenne body. You have the body mounts in my thingiverse profile.

[@paulz.6632]

Which shocks do you recommend to lower the chassis?

[@kwattro76]

Im building this right now!!!!!

[@cet3dprojects]

Thank you for trusting the project!

[@kwattro76]

@@cet3dprojects It's going to be a long range FPV vehicle. When I say long range I mean by several miles:)

[@kwattro76]

@@cet3dprojects There's new remixes/modded parts for your kit. I just printed the shorter bumpers.

[@cet3dprojects]

@@kwattro76 Wow! It is somewhat risky to do that with a car, since it could get stuck due to some circumstance of the terrain or who knows what could happen haha that in my country would be complicated but if you can record it for KZbin it would be surprising hehe

[@kwattro76]

@@cet3dprojects Ill know all of the paths and they're all open outside of the city long parks and around some of our lakes. There's a guy on KZbin who has a truck that he uses to buy stuff from his convenience store. He has a locked case with money in it with his camera that allows him to see the store and a servo that opens a cash box.

[@lennart1710]

some of the parts in your list arent available on Aliexpress, could you maybe make an update on this list?

[@cet3dprojects]

Hello, I have fixed some links, if you need something that you can't find, don't hesitate to comment and we will look for it. Thanks for the support, greetings!

[@lennart1710]

@@cet3dprojectsHi, I have Problems to order the parts C6, C7 ans C8, when I Click on the link there Pop up a window which says, that the Parts aren‘t availabe at my location. Greetings from Germany

[@cet3dprojects]

@@lennart1710 I understand, in that case you have to look for a seller who can sell it in your country, you can see the code of each of the pieces in their link. For example, the C6 is 11184, and if you look for it from your country, I think there will be sellers for your area, since they are very common pieces, you will have no problem finding them, greetings!!

[@lennart1710]

@@cet3dprojects thanks for the quick reply

[@StefanoMartinengo]

It took a few months, but I built your car out. I used PLA, and PolyCarbonate filament. And this thing is great. Thanks for the posting. It's really a great car! The one part that is frustrating, is the A arms keep breaking. No matter what I try, they seem to break so easily. Do you know if there is any aluminum/metal/plastic part that you can buy that would fit this set up? I feel like if the arms were metal, this thing would rarely ever break. Thanks!

[@kwattro76]

Use ABS

[@kwattro76]

I used PET-G for everything

[@fpvttejon9689]

Muito bom seu projeto! Tem sido meu passatempo montar isso. Infelizmente minha impressora não se saiu muito bem em algumas partes mas sigo resolvendo os problemas. Usei pla. Que filamento vc usou no seu?

[@cet3dprojects]

Olá, desculpe pela demora, estava ocupado fora do KZbin. Por se tratar de uma montagem de muitas peças, é conveniente ter a impressora bem calibrada e o plástico em boas condições de umidade, usei PETG e o projeto foi pensado para isso. A fibra de carbono PETG é possivelmente a mais resistente e fácil de imprimir ao mesmo tempo. Obrigado por confiar no projeto!!

[@paulz.6632]

Great video Which diffs and drivetrain and axles did you use?

[@cet3dprojects]

Hello @paulz.6632, take a look at the website that I have left in the description, you will find lists of components and assembly diagrams, the website was down for a few days due to a problem with the hosting but it now works. Thank you very much for stopping by here!

[@handelloyd6631]

Amaz bro

[@cet3dprojects]

thank you very much!

[@Stickybandito87]

The parts list and all the links you have listed state that the account is suspended and will not show anything else. is there anyway to get the parts list from you or is it possible to update the links? i love the build and cant wait to start and design my own body

[@ADee1805]

Yes that would be very nice, I already started to print the parts. I wanted to start now to source all parts and now the site is down 🙈

[@cet3dprojects]

There was a problem with the hosting, it is now solved, thank you for trusting the project!

[@ADee1805]

@@cet3dprojects yeah I have seen it already, thank you very much buddy for this nice design 🙏

[@ATILSAHIN]

3 mm bushing (C8) link does not open in the parts list. Could you please explain the details of the part? Can you give me the exact dimensions?

[@cet3dprojects]

Hello ATILSAHIN, sorry for the delay, I already replaced the bushing link, thank you very much, greetings!!

[@OsIT-id]

how much weight without spare parts ?

[@cet3dprojects]

Hi OsIT-id, good question, I don't know. I have only weighed it on several occasions fully assembled, and it weighs between 1850g and 2000g depending on what is mounted, bodywork, bumpers...

[@KorevaarAnne]

Do you have .step files available so I can make them easier to print. And to make it fit my parts?

[@KorevaarAnne]

I can’t send pictures in the comments but me and a friend of mine are building this one right now

[@cet3dprojects]

Hello Anne, currently I don't have the files in .step format, but if you tell me what the problem is, I'll try to help you. So far I was able to properly print the files using STL, with the CURA software. Thanks for commenting, regards!

[@cet3dprojects]

you answered yourself hehe, I saw the message by chance. If you are Thingiverse users you can upload photos about the project, linking them to PROTO36 and people can see them in the "Makes" tab from the project page. If you have any problems during the assembly, do not hesitate to comment, regards!

[@KorevaarAnne]

Finally got around to start printing what type of body wil fit?

[@maloneuville8140]

Your website is down sadly 😓

[@cet3dprojects]

Fixed, thanks for trusting the project!

[@julienl.8021]

links provided doesn't work " Account Suspended This Account has been suspended. Contact your hosting provider for more information."

[@cet3dprojects]

@julienl.8021 thank you for letting me know, there was a problem with the hosting, it is now solved, thank you!!