106 looked better could make out the fish mid screen easier

Do you know if Garmin is about to release a newer updated version of Livescope?

Very good informative video, as an IT gyy, disapointed that Garmin gives no info on processor power of its units

Thanks for the useful video. I finished installing the Kraken on my boat yesterday evening. I look forward to using it after the wind settles a bit here. The motor appears to be well built and I look forward to using it. Having said that, it was not an enjoyable install for two reasons. The first reason is not directly related to the Kraken, but to the Garmin mounting plate. The holes for the pins securing the plate that mounts to the motor with the plate that mounts to the deck are not properly aligned on the plate that I received. I had to drill one of them out, an easy task but now the corrosion resistance of the plate set is compromised as the drilling process removed the epoxy coating in that hole set. You touched on the second issue, Garmins choice of using two red positive wires and two black negative wires in the power cord caused me to waste much time to figure out how to connect the cord to the plug that I had. To further complicate the matter, Garmin placed the the two red wires on opposite sides of the cable (when viewed in cross section). They did the same thing with the black wires. Garmin's choice to have four power wires instead of one red wire and one black wire will make it difficult for the average DIYer to wire the cord in a way that looks good and won't cause potentially bad connections. That issue alone will cause me to not recommend the Kraken to any of my friends as I think that the issue might pose a danger to DIYers that don't get good, secure connections between the cord and the plug due to Garmin's choice of power cord. Shame on Garmin for putting that power cord on a motor that costs so much.

Great video mate. Ken from Australia

Do you know if UHD2 Wireless Networking can be turned OFF to reduce the Amp draw? Wireless networking is useless when ice fishing, Amp draw on the other hand is critical for ice fishing..

I’m not getting oil psi and water psi gauges on my garmin.

Hi Can I change the sdCard because I used an old model card and it caused slow operation. I have echomap uhd2

Nice! Had no idea. Thnx

I have an echomap plus and a UHD both are 75sv. I linked them with an ethernet cord and can switch the transducers between the units but the waypoints are not transferring from one unit to the other...am I missing a setting?

Thanks! These settings made a world of difference

Can you do a video of traditional sonar setting

Pick me 🐟

Will this work for the Garmin striker vivid 7

I need this so bad!!

It doesn’t shut off at 14.7 it will take 15V

Thanks for this video.😊

T0p

Great info mate. Thanks. 👍👏

Anyone have comparison on the 73sv uhd vs 93svuhd2? It has more pixels but also bigger screen. Which equates to about 13.5k more PPI than 73sv. Can't decide it I wanna upgrade, is it alot more crisp?

See lite doesn’t suck as well

How is there no videos of it on the water yet

Came here after I made a purchase of similar lights. I wasn't sure if it's legal to put on the trailer. Why didn't the backup lights come with the boat trailers in the first place?

I beg to differ . I reached out millertech before I bought any lithium battery. . With no response period. By email and never got a response period .

2 93's or 1 122... id go for 2 93's i guess.. better go for maps on one and live on the other.. split screening a 12 isnt ideal..

54597 McDermott Estates

Looking for standalone best side imaging for best price for older 14' boat. Like the navionics on UD93V w/ gt56. Is this as good as say the Hummingbird Mega g4si products so many people have?? THX!!

Thanks for the video

Does anyone know if it's as simple as upgrading the transducer? I have the Garmin echomap 93sv with the gt54. If I upgrade to the gt56 am I going to get all the benefits or do I need the entire unit ?

kzbin.info/www/bejne/rnjIe5KAqtOCmassi=9J9qAZZsprEoeCyT LiveScope for Co- Angler rear bass boat seat

kzbin.info/www/bejne/rnjIe5KAqtOCmassi=9J9qAZZsprEoeCyT not selling anything Co-Angler Livescope

kzbin.info/www/bejne/rnjIe5KAqtOCmassi=9J9qAZZsprEoeCyT

My Garmins are sharing waypoints, but the waypoints are 2060 miles apart! Any idea why?

Do you have the 106SV shield back in stock yet?

What are you calling deep or shallow water !! Deep=25-40 or 75-150 ????

Hello. Great video. Can’t wait to try the settings! Can you share the setting you use for traditional with the gt54 please?

I had a 93sv echo with the upgraded card on the bow . Now I have a 126sv echo I want on the bow and move the 93 to the council . Do I need to add in a nemma 2000 sistem in also? I want to be able to use my units one at a time when I'm fishing solo . Can I down load my upgraded card from last season into my 126 ? I also want to use my 93 seperate in my ice fishing kit . Do you have wiring diagrams for what I will need to do please ?

Does it have to be removed when running from spot to spot, or is there a way to secure it in the rod holder assembly?

Will a uhd 73cv pick up sidevue off an ultra uhd 106sv???? Or just traditional and clearvue???

Thanks for the video. I’m a new user for the echomap ultra 106sv on my kayak. Do you have any videos for setting up the traditional sonar?

In depth on wiring would be great .

The backbone carries the 12 volts to all devices connected

Do you have a video of the GT51M-TM?

Will this fit the echomap ultra 102sv?

Thanks. Now, I'm ALL Confused...! Lol... Not really, as this has taken away a LOT of confusion about my settings.

Could you put a parts list for the connectors and tools you used for installation of the lights?

What if the ECHOMAP has lakevu on one and navionics on the other one

Hey man. Any idea why my map depths dont match my sonar depths. Its off 10-15 ft. Kind if frustrating. Im no expert so there may be somthing im missing.

Very Helpful

Thank you so very much,