Weld Co JCB

Пікірлер

@tson5159 11 күн бұрын

Does the 3 point hitch and belly mower work at the same time with the same control. Can they operate individually

@weldcojcb 10 күн бұрын

Thank you for watching and commenting. They are both going to be controlled by the 3-point lever. However, you can lock the belly mower in position and then just control the 3-point. You turn the knob that controls the belly mower height to the lock position and then you can operate just the 3-point. I hope that answers your question. P.S. You cannot do it the other way, you cannot lock the 3-point and just raise and lower the belly mower.

@patrickreed6213 20 күн бұрын

I’ve got this tractor with 112 hrs and it started slipping out of gears, especially reverse it won’t stay in unless I’m holding the lever. Not sure what it is any help would be greatly appreciated.

@weldcojcb 18 күн бұрын

I would recommend you take it back to the dealer. Depending on how old the tractor is, it may still be under warranty. Tractor would have come with 1 year warranty on the loader, 2 years on the tractor (full warranty minus normal wear items), and 5 years on the powertrain. I haven't had a customer experience what you are experiencing, so i'm not sure what the cause is.

@KerryTilley 25 күн бұрын

Good job JJ

@weldcojcb 25 күн бұрын

Thank you for watching! Thank you for the compliment.

@joleger8494 27 күн бұрын

Thank you Sir. Very good information.

@sonofsteve566 Ай бұрын

do you know why my 270 won't go into H mode ?

@weldcojcb Ай бұрын

If yours is this same style of machine (button layout is the same), then the machine has to have the engine off, but the key turned to the accessory position. I can't remember right off hand if you have to have the left joystick/armrest down and lap bar down or not, but i don't think you have to. You can't switch it with the engine running. Let me know if that works. Thank you for watching and for commenting!

@sonofsteve566 Ай бұрын

@weldcojcb same style tried everything as stated, wont switch..appreciate your response

@weldcojcb Ай бұрын

@@sonofsteve566 Is the h-pattern button illuminated just like the iso button or is it dark?

@tonyt8807 Ай бұрын

I 3d printed a detent so my box blade would stay on the ground. My 1974 MF14 had one.

@weldcojcb 25 күн бұрын

That's pretty cool, thank you for watching and commenting!

@shadowbanned-iq4fl Ай бұрын

On the front end loader what are the two parts that are lynchpined in that rotate down?

@weldcojcb Ай бұрын

Those are the kickstands for when you take the loader off of the tractor. Please see our other video that goes into specific step-by-step detail on how to remove the loader.

@shadowbanned-iq4fl Ай бұрын

@ THANK YOU for your prompt response. I will watch it now.

@jackhinkle1401 2 ай бұрын

How to reverse flow for attachments

@Foxbodychuck386 3 ай бұрын

Do the deck lift arms stay up when you remove the deck? Concerned about them hanging up if when working with the 3 point.

@weldcojcb 3 ай бұрын

You'll want to raise them all the way up with the 3-point lever on the right side of the seat that raises and lowers your 3-point, this will also raise and lower the belly mower. When you have the arms all the way up (after you've removed the belly mower), you'll turn the knob that adjusts your belly mower deck height. The knob is shown at: 9:08 of this video. Turn the knob to the "lock" position and then the arms will stay where you have them set regardless of what you do with the 3point. Hard to explain via text, but hopefully that makes sense.

@chris0123 4 ай бұрын

Thank you!!

@googlreviews7813 4 ай бұрын

Bought my GC1725M brand new in 2020. Front hood latch got replaced with 2021 system as the 2020 plastic one kept breaking, so dealer installed the metal frame under the dash like 2021 and later models have. I got little over 800 hours on it now, overall it's a decent tractor although there are some issues with it... If you get the TLB model, the seat is awful, very uncomfortable. Loader is pretty weak too so you can't pick up too much weight at all, and I don't believe it has free float mode on rear 3 Point Hitch. But overall I am happy with it would I buy this model again, hard to say, my dealer is close by and they have a reputation as one of the best and I'd have to agree, always very helpful and willing to assist, same can't be said about local JD dealership and nearest Kubota is about 1 hour drive away. Drive over mower deck is pretty nice and reliable, Woods rototiller is also fairly nice. I'd rate it at 7.5☆ out of 10

@53GOSSAMER 4 ай бұрын

When I take the backhoe off it looses pressure and I can't get it back on tractor. What do you do in this situation?

@weldcojcb 4 ай бұрын

hook the hoses back up and you'll have pressure again

@popwall4297 4 ай бұрын

The one thing that I have been searching for and you skipped it the knob that controls the up and down speed of the 3-point hitch right up above it on the right there's a lever that points up and down what the heck is that thing I cannot figure it out

@weldcojcb Ай бұрын

I apologize that I didn't see your comment until now. If you're talking about directly under the loader joystick, that is the loader joystick lock. It will do just that, lock the loader joystick.

@danielcarroll6010 4 ай бұрын

Great video

@ThomasMiddleswart 4 ай бұрын

Spring for a cameraman. Good video but poor camera work is distracting.

@weldcojcb 4 ай бұрын

Sorry it wasn't up to your standards, i'll do better next time.

@silvercreek89 5 ай бұрын

Great video guys. You make the PTO connection look easy, 1st time I tried to hook mine up it took 20 minutes- didn't want to latch. Flipping the tie down bracket and how to adjust that section was super helpful!

@weldcojcb 4 ай бұрын

We've had lots of practice. Making sure your mid mount pto is in neutral is key, then you can spin the pto by hand while you're under there to get the splines to match up. Thank you for watching and commenting!

@billyray6913 6 ай бұрын

The backhoe seat sucks. Someone should redesign it.

@penniedevleming2667 6 ай бұрын

4 wheel drive?

@weldcojcb Ай бұрын

yes

@gentrytompkins3890 6 ай бұрын

Anyway to get more power to the backhoe

@weldcojcb Ай бұрын

no, some people think pulling on the levers will create more power, and then they'll come in with bent levers. It's a valve, once it's open, there's nothing pulling harder on the lever will do. You could always go up in tractor and backhoe size.

@erinmclaughlin-jenkins1060 7 ай бұрын

This was really helpful. Maybe reshoot with someone holding the camera. Just sayin. Thanks

@danielbrazzel4460 7 ай бұрын

I cant engage the rear PTO at idle. It's a very harsh engagement and kills the engine. I have to bump the RPMs up to around 1600-1700 to keep the engine from being choked out. Its still a very hard engagement but the tractor stays running. Anyone else have this issue?

@jberkos1 7 ай бұрын

Where can I get one of the pressure relievers?

@weldcojcb 7 ай бұрын

Thanks for the comment, what model do you have?

@jberkos1 7 ай бұрын

@@weldcojcb it would be for a JCB 505-20 telehandler

@weldcojcb 7 ай бұрын

@@jberkos1 i believe on those you are just going to push the hose further "into" the machine before you pull out and that should bleed off the pressure, does that make sense?

@jberkos1 7 ай бұрын

@@weldcojcb hmm kinda. I’ve never tried that. But I know it’s a nightmare trying to get attachments back onto that machine. But I’ll give it a try and let you know what happens.

@weldcojcb 7 ай бұрын

@@jberkos1 That should work for you

@bitemyonionnolastname8213 7 ай бұрын

Watched a lot of these lately. This is the most informative that I’ve ever seen! Nice job!! Thanks

@weldcojcb 7 ай бұрын

Thank you for the positive feedback! Thank you for watching and commenting!

@makerog5666 8 ай бұрын

The whole purpose of making a video is to show-and-tell. When the audio is pure garbage, there is no point in uploading it.

@weldcojcb 8 ай бұрын

That's why we made a new version. Feel free to find it on our channel. Thanks for watching and commenting

@weldcojcb 8 ай бұрын

kzbin.info/www/bejne/oobZdmSEiqidpJY

@crispiang 8 ай бұрын

Wow! You took my fear of fumbling around and possibly breaking something away. Phenomenal job, sir!

@weldcojcb 8 ай бұрын

Thank you very much! Thank you for watching and commenting. Feel free to give us a follow

@VendMD 8 ай бұрын

Lots of knowledge, thanks for passing it on...

@weldcojcb 7 ай бұрын

You're welcome, thank you for watching and commenting!

@jasonzoellner7547 8 ай бұрын

Just getting used to my 2023,and it's important to be careful. Learning how to use the new tractor only makes sense.

@weldcojcb 7 ай бұрын

Thank you for the comment and for watching!

@jasonzoellner7547 7 ай бұрын

Definitely. More information the better

@kirkthejerkthe1st 9 ай бұрын

I am looking at a new leftover 2022 and am wondering if there is any difference between it and a 2024. Does the year affect resale value as on a car?

@weldcojcb 7 ай бұрын

I apologize, i didn't see this comment come through. I'm sure you'll get a better deal on the 2022, but year doesn't matter as much as hours on tractors. No changes from 2022 to 2024 models.

@silverhawk3324 9 ай бұрын

Thank you - very helpful

@dickritchie2596 9 ай бұрын

If only every instructional video were this good. Bravo.

@levimcgee 9 ай бұрын

Great video! Thank you for making it.

@lyleswavel320 9 ай бұрын

Would be nice if massy created 2 couplers for hydraulic hoses when backhoe is removed, to hold hoses up and out of the way.

@JustinVManes 9 ай бұрын

Solid! Is there a way to get a 216t into a float mode?

@Lucky4wd4840 9 ай бұрын

Can you do one for the newest 2024 TeleSkid with Factory Backup camera and no analog gauges>

@weldcojcb 9 ай бұрын

2 Steps ahead of you. Check our other videos and you'll see it. Thank you for watching and commenting!

@ericridgerock9083 10 ай бұрын

Grease!!!!!!

@dantihon3997 10 ай бұрын

at exactly 4:14 anything can happen and your hand does not look safe at all ! ...... I will never, never do that ! I am sorry, don 't get me wrong.

@weldcojcb 24 күн бұрын

The loader is sitting on parking stands, so short of an earthquake, his hands are fine there. Thank you for watching and commenting.

@dantihon3997 23 күн бұрын

@@weldcojcb you take it offensively, it is the way you see it, if you do't see it the way I see it, Sorry, I can 't help .... at 4:14, the loader is sitting on stands, if someone or something accidentally is going to touch it, your hand is in danger .........

@dantihon3997 10 ай бұрын

I believe it is very unsafe procedure .........

@weldcojcb 10 ай бұрын

why is that?

@gregbarr866 10 ай бұрын

Please go see a doctor and get that breathing looked at.

@Peter-ve6fy 11 ай бұрын

Hi, just bought a 2017 teleskid with a beacon light on roof. It plugs into a socket at edge of roof near upper front corner of the door. Can't figure out how to turn it on!???

@weldcojcb 11 ай бұрын

I'm trying to remember, is it tied into the front lights? I don't have one of this model here currently to try.

@Coyote1473 11 ай бұрын

Very helpful but I should have entered the 1835e. Oops

@louies67 11 ай бұрын

You got a part number for that left joystick for that machine

@Sandi99999 Жыл бұрын

Great tractor bud I'm looking to buy a 1735 wondering if you have any info. On the 1735 thanks Rick

@weldcojcb 10 ай бұрын

Sorry, somehow missed this comment coming through. The 1735 and 1740 have been replaced with an 1835E or 1835M and 1840E or 1840M. Where are you located?