2 ай бұрын
4 ай бұрын
9 ай бұрын
10 ай бұрын
Жыл бұрын
Пікірлер
@romella_karmey 7 сағат бұрын
This life of sitting in front of the computer for longer periods of time is unnatural for us 😢 all these money we accumulate is useless if our spine is defective already 😢
@darith27 4 күн бұрын
Who won?
@sebhridoy 5 күн бұрын
If you’re tall or heavier, PLEASE get a high-back chair with a wider seat. It makes all the difference in comfort and productivity! @homekitdecor 💻
@open-course-delta-lake-h3k 19 күн бұрын
I was repeatedly butting heads with support tickets, and this video inadvertently informed me what to do: I was able to lower the desk which had previously been lopsided, by first turning it upside down, and then turning it right back up, and then pressing and holding down the downward pointing button. Once it finally came down, the error code was still on, and the desk was not going back up. I was stuck on this issue for a day, and support was no help. This clip informed me to unplug, wait, repug in, and then wait) after the error code forced me to lower the table to its lowest setting). It's working fine now.
@AutonomousAI 17 күн бұрын
Hey there, we genuinely apologize for the difficulties you've faced with our support. Your feedback is valuable and will help us improve. We're also glad our video helped with your desk issue. If you need any further assistance, our team's here for you. Thanks for sharing your experience and enjoy your desk! 😊
@bencheng1854 Ай бұрын
seat shall have more cushion. start to get painful after sitting all day
@OfficalHoxon Ай бұрын
How did you do that?
@HonorIsDead101 Ай бұрын
If only it were as easy as the video made it seem. My chair is ~3 years old at this point and started to sink, oh I can change out the lift, it looks so easy and its cheap I thought. No. Its a pain! I was able to get it out of the wheel base fairly easily but it was so stuck to the underside of the chair nothing worked. pipe wrench and plenty of lube and it simply wouldn't budge. I finally got out the power tools and hacked it off.
@somebodyoncetoldme1704 Ай бұрын
Thank god for the mute button
@derekjsteel Ай бұрын
4 years after this video was published, and the instructions are still terrible. Aside from trying to line the holes up, which was a massive pain, none of the parts are labeled except for the 3 VISIBLY DIFFERENT legs. I'm hoping this desk works well, but at this point I don't think I'll be buying from here again. Screws/bolts are labeled Y and Y1, V and V1, etc, which leads to using the wrong screws/bolts and having to backtrack. Add to this the incredibly frustrating lack of detail in the instructions and images, and you're left with a very sour taste in your mouth. For around $1,200, this is ridiculous. Do better, Autonomous.
@AutonomousAI Ай бұрын
Hi there, thank you for reaching out to Autonomous! We apologize for the issues with the assembly instructions. We understand the frustration caused and have taken note of your concerns. We appreciate your feedback and will continue working on improving the instruction manual. Please feel free to reach out if you need further assistance, we'd be happy to help.
@Archie134 Ай бұрын
What’s the shelving unit from
@ashtoncorr1684 Ай бұрын
It's a shame that most of these controls don't work on my chair (never have) and my brother's chair broke within a year (The piston) and they said to buy an entire new $600 chair...
@NickC341 Ай бұрын
super nice but my budget is 5-10k
@statusquoreject 2 ай бұрын
this is one of the most uncomfortable and overpriced chairs I've ever owned and sat in. Wanna be Herman Miller chair, but no where near the comfort, design, or quality.
@-gg8342 2 ай бұрын
I just hit the legs just under the feet. When I got to the third leg I hit it good and the legs popped off with the cylinder in one peice!!! Now I can replace my seat!
@AutonomousAI 2 ай бұрын
Wow, that's amazing! We're glad to hear your solution worked ❤
@tsgt2007 2 ай бұрын
Are the caster good for hardwood floors?
@AutonomousAI 2 ай бұрын
Yes, the Chair Ergo's castors work well for hardwood floors. Happy to help should you have other questions!
@shanye5570 2 ай бұрын
You guys are just a drop shipping company that slaps your own label on chairs You guys have the same manufacturer as Merryfair in Malaysia
@yoitsgiook 2 ай бұрын
For the first time in 2 years I was able to adjust the height 😂 The tension on that lever made me think I was gonna break it.
@yoitsgiook 2 ай бұрын
For the first time in 2 years I was able to adjust the height 😂 The tension on that lever made me think I was gonna break it.
@anitar3136 3 ай бұрын
Excellent! Sending many blessings from one of your many yoga students🙋🏻♀️
@DornaMachine 3 ай бұрын
Oh man take a long shot so that we see how the room looks like at the end.
@littleroguewolf 3 ай бұрын
hmm I dont feel like this was a review.......
@kj3d812 3 ай бұрын
This chair is hands down the BEST chair I've owned, in almost 30 years of sitting in office chairs. Just wish it would go up higher for those of us who are short and need to reach desks made for 6-foot people.
@AutonomousAI 3 ай бұрын
Hi there, although we do not offer longer gas lift for the Chair Ergo, it is still possible to add a third-party one to your Autonomous Chair Ergo. We recommend are a barometric rod diameter of 50mm (2") and an open length of 270mm (10.6"). Hope it helps!
@smthsmth 3 ай бұрын
A small gnome jumps into a chair to test if its strong. Next time pick a 6+ foot guy.
@PotcleanXz 4 ай бұрын
Wrong hand position at the end
@EricPollarrd 4 ай бұрын
A third party lumbar support just degrades that chair completely. Get a decent chair lol
@indigotheperson 4 ай бұрын
Hi. I have attempted this with no success. My keypad displays no visual unless I press the down button. I have heard no beeps of any kind. The light on my control panel shows green when everything is plugged in. What can I do to fix this issue? My desk now sits at its lowest point; it is not comfortable to use in this position.
@AutonomousAI 4 ай бұрын
Hi there, we are sorry to hear about the problem with your product! For our support team to check more carefully, would you kindly help provide the order details and a short video of the keypad issue using the link below? Thanks a ton! Defects and Replacements: www.autonomous.ai/help-center#DefectiveProductsReplacement
@brandondapro 4 ай бұрын
Did I get sent an old desk… I ordered in 2024 and my eureka base does not look anything like this
@AutonomousAI 4 ай бұрын
Hi there, please help share the order details and some photos of the desk base via our email [email protected] so that the support team can further investigate the desk model for you.
@cooleydw494-yl5kl 4 ай бұрын
been sitting in this chair for years and adjusting the height of the lumbar support just blew my mind lol... I somehow knew I hadn't optimized everything, but I really shouldn't have waited to figure it all out. Also: protip, yes you do have to turn that tilt tension crank A LOT of times to get from point A to point B so keep going. Also you can feel it much more obviously if the back tilt is fully unlocked (that's also in the video), but it definitely does make a small difference at extremes either way. Maybe hard to perceive, but for me turning the tension all the way up definitely helps me maintain my posture better when sitting forward a bit.
@Topasmr-d4b 5 ай бұрын
jou deserdet a like and sub
@rhondaburns1379 5 ай бұрын
Everyone outside can hear you screaming because the window is open lol.
@spydude38 5 ай бұрын
At $19,800.00 I don't see the value add. Its nice though.
@caiyichuan1983 5 ай бұрын
I got an Ergo pro chair but found it’s too low for me even I adjusted the seat to max height , could autonomous offer or recommend taller chair cylinder?
@AutonomousAI 5 ай бұрын
We do not offer taller chair cylinders at the moment. However, it is possible to add a third-party gas lift to your Autonomous Chair Ergo. Regarding the recommended specs, we recommend a barometric rod diameter of 50mm (2") and an open length of 270mm (10.6").
@danramone9836 5 ай бұрын
respect for not hiding these truthful reviews
@gabrielvsanchez 5 ай бұрын
Thank you, helped me a lot!!
@efraincorpus8777 5 ай бұрын
So there is no need to sand the desktop.
@Lyssy66 6 ай бұрын
WEe can't figure out to how to adjust the height of the chair
@AutonomousAI 6 ай бұрын
Hi there! This is the Operation Guidance of the Autonomous Chair Ergo, which we hope will be helpful for you: kzbin.info/www/bejne/p4Cso4OBlqZ9rdE
@meikkcom 6 ай бұрын
Thanks, that helped.
@egatx 6 ай бұрын
thank you! 🙏🏼, finally a real video
@Maegriss 6 ай бұрын
It took 4 months for the replacement cylinder to arrive, I was sitting in a chair that wouldn't stay a the needed height for that time. I ended up taking the whole thing apart, took the cylinder apart so the legs and the base was seperate, combined vices/braces didn't work to undo the bottom, and a pipe wrench just pulled the actual gas cylendar apart. its in the trash can now as I sit in a $40 chair I had to go rush buy until I can find something better. Will not buy from them again. but if you're here, you've probably already suffered the same fate
@AutonomousAI 6 ай бұрын
We are so sorry for to hear about the experience. If you have any issues with your chair, please do not hesitate to reach us at [email protected] with your order number, we'd be glad to assist you further!
@treyxaviermusic 6 ай бұрын
What an absolute fucking pain in the goddamn ass that was. I got it done, but why in the name of all things holy was it that difficult? Why isn't there a better way? Why don't you spend some time in R&D fixing this problem? My chair's only like 2 years old, there's no reason I should have to pay AND do a Herculean task to fix it. Completely ridiculous
@AutonomousAI 6 ай бұрын
Hi there, we're sorry to hear about the inconvenience caused! Please know that we take feedback carefully, and our product team is working on how to improve the assembly in the future. For the gas lift removal, our customers also successfully use a technique to put a piece of softwood below the cylinder, protected by a small towel as well and use the rubber mallet to hammer down the base, with medium hits, rotating the base, for 5 minutes, the base pops out. If that does not work, you can try using a hair dryer to heat the metal. This will cause the metal to expand. Hence, when it cools, the metal will contract thus allowing a little more wiggle room to pull the gas lift out.
@mdpavelhossain2091 7 ай бұрын
your hand should be at least 90 degree to the desk, rise the chair height if needed, use a leg rest. put something under your laptop stand and raise your laptop screen to match your eye level
@ice-qf8vz 7 ай бұрын
Had my large L desk in white for 2 years now. I love it, and it looks incredible still! The fact this video exists is even more reason I will continue to recommend them. After 2 years the only thing that is wrong is I accidentally scratched it once after trying to catch a dropped phone and bashing my tungsten ring against it. Truthfully no desk would have survived, could not be happier with this!
@anti-commodity123 7 ай бұрын
I sit like v2 in 4-4
@sephondranzer 7 ай бұрын
Your chair has been the worst chair assembly of my life, and the most expensive… Choosing bolts for literally everything was a bullshit decision from you and my chair is stuck half assembled and I can’t disassemble or get the backrest properly. Fuck your entire team for that
@avolovo 7 ай бұрын
Hi Autonomous! I’m interested but have a quick question: Is this chair suitable for a small framed 4’11’’ female?
@AutonomousAI 7 ай бұрын
Hi there, please check if the height of your knees matches that of the seat from the ground and the max height for the ErgoChair Pro is 20 inches. When you consider the seat width, it should be wide enough to accommodate your waist measurement, but close enough for you to make use of the armrests. The width of the seat and back of the ErgoChair Pro is 21 inches. The height of the back of the ErgoChair Pro is 22 inches. Compare it to your own back height and you’ll know whether the length of this office chair is suitable enough for you 😊
@jayzswayz4897 7 ай бұрын
is there a way to hook this up to my heat pump?
@AutonomousAI 7 ай бұрын
Hi there, thank you for reaching out! Please help send the heat pump's parameters (name, wattages) as well as your email; or directly contact our pod team's email [email protected] so we can assist you in the best way ❤
@jcastaneable 8 ай бұрын
Where do I get a replacement part?
@AutonomousAI 8 ай бұрын
Hi there, thank you for contacting Autonomous team! Kindly complete the form below to request a replacement, and our support team would be happy to assist further: www.autonomous.ai/help-center#DefectiveProductsReplacement
@arekchojak1907 8 ай бұрын
Absolute rubbish, try doing this on one year old chair where the cylinder is so deep inside and literally fused to the base. Not even a sledgehammer is going to help here.
@AutonomousAI 8 ай бұрын
Hi there, thank you for reaching out to Autonomous! We would suggest you try the method of using a soft or rubber mallet to remove the gas lift from the mechanism. Our customers somehow successfully use a technique to put a piece of softwood below the cylinder, protected by a small towel as well, and use the rubber mallet to hammer down the base, with medium hits, rotating the base, for 5 minutes, the base pops out. If that does not work, you can try using a hair dryer to heat the metal up. This will cause the metal to expand. Therefore when it cools, the metal will contract thus allowing a little more wiggle room to pull the gas lift out. Here is a video we believe that will help: kzbin.info/www/bejne/i6PQm359Z6p7h9E
@HowIin 6 ай бұрын
@@AutonomousAI You linked to the video we're commenting on?
@kevinleon7772 8 ай бұрын
I am 6 foot, is this a good chair for me? I saw some complaints about head rest moving and not for tall people
@AutonomousAI 8 ай бұрын
Hi there, thank you for reaching out to Autonomous! The most accurate method to determine whether a chair fits your body type is to know of your own measurements. We believe the following article will help you in finding an appropriate chair and please do let us know if you have any questions as we would be happy to assist! <3 www.autonomous.ai/ourblog/best-ergonomic-chair-for-a-tall-person-what-you-need-to-know
@harikrishnagorrepati1145 8 ай бұрын
No instructions. Please make some other video.