Please contact your local distributor and ask them. Otherwise you can also ask for our Audurra spray suits. Here is the link to the catalog (page 31): www.axalta.com/content/dam/EMEA/audurra/public/documents/en/brochures/Audurra_Catalogue_EN_2024-08.pdf

Lo siento, no entiendo la pregunta...

Hi. We didn't quite understand your questions? Could you please explain a little?

Can be used with drying at 20 degrees celcus the cromax cc6400? @@CromaxEMEA

can you do the drying at 20°C with cromax cc6400?

Thanks for clarifying your question. With CC6400 we recommend force drying at 60°C object temperature or by using an Infra Red curing unit. Please refer to the TDS for additional information sdstds.cromax.com/Doc/TDS/EN/EN%20CC6400.pdf

Merci beaucoup pour vos commentaires.

Lamentablemente, no hemos entendido bien su petición. ¿Podría ser más específico?

It's Cromax, too...

kzbin.info/www/bejne/oKfdenZ3ot1oqrM

Here is the link: kzbin.info/www/bejne/i4eof6d_r9Cgh8k

Hi, thanks for getting in touch. There are a number of clearcoats that are suitable with Cromax Pro and it really depends upon your needs. We offer clearcoats ranging from traditional 2 coat application through to energy saving products that can be applied in 1.5 coats for example. Please refer to our TDS's sheets or our website for further information on our products. Alternatively if you descibe your requirements, conditions and location I can try to advise.

Hi, thanks for the question although I would need a little more details in terms of your process, system build up inclusding substrate, RFU preparation and application details to help further.

Thank you very much, glad you like it!

Hallo, könnten Sie bitte Ihre Frage nochmals komplett auf Deutsch formulieren? Bei uns kommt es halb auf Englisch, halb auf Deutsch an und wir verstehen das nicht zu 100%. Danke

Hi this clearcoat like all of our clears is UV resistant. For it to be applied on plastic substrates in the course of vehicle refinishing the addition of an Elastic Additive is required in the clearcoat. For further information on this and the system build up reqiuiremnts plaese refrer to the TDS sdstds.cromax.com/Doc/TDS/EN/EN%20CC6750sys.pdf

Thanks for your mail and good to know you enjoyed the video. Tony, our technical expert in the vid, he is from the UK...

The blender is applied to the blend panel or area before aplication of the basecoat colour. It helps to produce a smooth even transition between the original paint and the newly applied refinish materials. Details on the preparation and application/blending process for Cromax can be found in the appropriate TDS - sdstds.cromax.com/Doc/TDS/EN/EN%20CROMAX.pdf

El dispositivo que ofrecemos sólo funciona con nuestra marca, ya que está conectado al programa de búsqueda de color ChromaWeb.

Póngase en contacto con nuestros colegas locales en España: www.cromax.com/es/es_ES/contact.html

HI, thanks for your question but, we don't quite understand it. You mention chipping but the video relates to pinholes created in the basecoat during application and processing...

Nasz technik zwykle nakłada warstwę przezroczystą od góry, aby zobaczyć, jak tworzy się folia, co pozwala dostosować aplikację, jeśli jest to wymagane, w celu osiągnięcia najlepszego rezultatu.

Czy do lakieru 8035 dodawać rozpuszczalnik ?

8035 nie jest produktem firmy Cromax...

Theoretically, it could be possible but the most efficient and economical method is to increase the air movement over the panel with a slightly elevated temperature, i.e. using an inbuilt air blowing system. When using any method that increases substrate temperature a period of cooling down must be allowed to prevent problems with clearcoat adhesion.

This repair was carried out using Cromax Pro Waterborne Basecoat.

After flashing the basecoat off for 6-8 mnutes it was left a further 5 minutes before sanding just to be safe.

Hi, thanks for taking the time to get in touch. In normal circumstances I would take a 1.2 set up. If conditions are more challenging i.e. you may want to change to a 1.3 but be careful as this could lead to over application of the effect layer which of course you need to avoid.

Hallo, das können Ihnen sicherlich meine Kollegen vor Ort am besten beantworten: www.cromax.com/ch/de_DE/contact.html / +41 (0)61 826 96 96

Como sabrá, Cromax ya no es propiedad del grupo DuPont, por lo que no podemos responder a su pregunta.

@@CromaxEMEA Perdón, cuál es el mejor barniz de cromax pro? Y como se aplica

​@@nismogt-r3393 el cc6700 y el cc6300 son los dos mejores

Thanks for watching our videos. I guess you comment refers to the basecoat appearance in the semi wet condition, which started already to flash off at this point. As you can see after flash off the basecoat looks very uniform acroos the complete side of the car and in particular, where the blends have been carried out.

We would not advise this procedure, as any solvent can lead to irreparable damages to the spectro. In addition to that we have to point out that the use of cleaners to pretend as a clearcoat might change the perception and results of the spectro reading. With our new function in Chromaweb, matt finishes can now also be measured by the spectro. Just activate the matt search button in the software.

Glad to hear...

Hi, please go to our website, select your country and contact my local colleagues. Perhaps they can help. All the best www.cromax.com/eu/en_GB/cromax-com.html

in her Philippines I'm paint mixer color 20 years experience.. how to apply needed work ready passport

Hi, no, there was no blender added to the basecoat. The blender is sprayed first and used as a wet bed into which you blend the colour.

Hi, from where do you write us? You can also check for yourself and contact our Cromax colleagues in your country: www.cromax.com/eu/en_GB/cromax-com.html Hope it helps... Thx for your feedback anyway ;)

Hi, thanks for the question and positive comments. I actually prefer to use a foam backed abrasive such as Audurra Fine Finishing Discs, Mirka Abralon or 3M Hookit Flexible Abrasive Foam disc as they give a more consistent cut and uniform finish. On modern OEM clears scotchbrite can sometmes lead to deeper scratches which are still visible after application of the refinish clear.

@@CromaxEMEA thanks for getting back to me mate, looking forward to more videos

Sorry, we don't know. This was bought by an agency...

From where do you write us? You can check our website and click on your country: www.cromax.com/eu/en_GB/cromax-com.html

Hi, thanks for the question. There are a number of clears within the Cromax portfolio that would suit your requirements such as CC6400, designed to be applied in 2 single coats with intermediate flash off or CC6600 which can be applied in either 1.5 coats in a continuous process or 2 coats with intermediate flash off depending upon your preference. Before choosing though I would suggest you check the TDS of each clear to ensure compatability with the basecoat you are using.

@@CromaxEMEA Thank you, I somehow missed the KZbin notification. ! I looked this up and I am not seeing it in the USA. Is there a North American equivalent for the CC6400?

The clear is combined with our special tinted clear additives not the basecoat itself. Please use he link to the respective TDS - sdstds.cromax.com/Doc/TDS/EN/EN%20CXCCAD.pdf

Thanks very much, happy you like it...

Thank you!