Hey, what is the Y axis Timing Belt Pulley Teeth number? please on creality Ender 3 v3 ke
@LayerLabAustralia9 сағат бұрын
Not sure 😢 but if you want a specific part number, just send creality a message and they will tell you 😊
@АлександрКузнецов-ф6с5н4 күн бұрын
Супер, бро 😎 спасибо за подробный гайд 🤝
@Blue-eu5qn5 күн бұрын
What are your print settings? Whenever I print stuff this tall it gets pulled off the print bed near the top.
@LayerLabAustralia4 күн бұрын
Aww man that's annoying. Have you tried using magigoo? It is a game changer! It helps keep everything stuck to the bed, I think it will help :)
@jjsoety5 күн бұрын
Thanks, buddy. Such a simple fix, but it worked for me.
@LayerLabAustralia5 күн бұрын
Glad it helped!
@poylido048 күн бұрын
Do you know where i can find the firmware 1.2.1.3 for the 3v3 KE? the highest i can find is the 1.1.0.14
@LayerLabAustralia7 күн бұрын
I believe that version is for the V3, not the KE :( I may be wrong, but I have had a good search online and couldn't find it either.
@poylido048 күн бұрын
Hey amazing videos :) you think there is a way to connect a cellphone as webcam trough the same process?
@LayerLabAustralia7 күн бұрын
Thanks! It all depends on what drivers are installed with the helper script, but I have a feeling the developer probably won't add in cell phones... But maybe they will? Is there a specific reason you prefer them over a usual webcam?
@poylido046 күн бұрын
@@LayerLabAustralia actually phone cam have a better quality of recording and since i have a couple it is a good option for me to just leave 1 recording my stuff here '^^
@cervega43888 күн бұрын
I’m on my 3rd one. All replaced for free by creality.
@LayerLabAustralia7 күн бұрын
Wow, go creality 😆
@toetie20199 күн бұрын
Thanks so much! I was messing around with TTPY0 values and USB drivers, the most simple solution is often the one!
@LayerLabAustralia6 күн бұрын
Haha glad I could help! When I eventually figure it out I was like "ohh mamn. If only there was a video that could have saved me hours of frustration" 😆
@viacheslavkulik56819 күн бұрын
thank you, I just can't believe that this shit requires such effort
@AllCreativeGaming11 күн бұрын
The issue for me is that the scarf seam does not seem to work at all in Creality 5.1. It does in Orcaslicer and Cura.
@Erbsensuppe2216 күн бұрын
Thank for sharing this.
@revfpv790817 күн бұрын
what infill did you use
@LayerLabAustralia14 күн бұрын
I tend to use AI infill for most things now at 15%. Can't remember what I used for this one sorry, but there are a few parts that need 100%, have a look at the instructions on the printables page :)
@CyberStorm0322 күн бұрын
hello. i couldn't find where to write. in creality print 5.1 version, i want to print two objects. i want it to print one by one. finish one and move on to the other. when i make the settings, it gives an imaginary blue z offset line and gives a too long error. how can i fix it. can someone please try? so that the objects are at least 10 cm?
@AtomicBleach24 күн бұрын
As far as im concerned this slicer as of v5.1 is still broken. It refuses to slice any model i put though it. just freezes every time at 85% and the computer ramps up fans and cpu just gets pegged. It will stay like this indefinitely. I can do the same model in any other slicer and it will generate the model with supports in like 5 seconds...
@xraylukasPL24 күн бұрын
In my case pin was fine but PCB wasn't seated correctly. I pushed down on it in the bagnet area and it fixed the issues.
@olafsastro25 күн бұрын
Hi! Does this camera work with other printers as well? I mean, will I see the printing process the same way, and does the night mode work too? I would be using it with an Anycubic machine, and it would be good to know if all the functions can be used with machines from other manufacturers. Thank you very much!
@Bandrik26 күн бұрын
Great video! I had a hunch today to try printing at an angle when a functional part was failing when printed horizontal OR vertical. It was nice to see it all in action, plus some nice Cura tips. Thanks!
@LayerLabAustralia25 күн бұрын
Glad it helped!
@Acelas127 күн бұрын
You dont want to scale the bolt lenght just the diameter. In this case it bolt lengh was on the x axis. If you want to ignore an axis while scale use Shift+ the desired axis than S. Example:Shift+x than relese the x and press S.
@seaperrowАй бұрын
can someone please help. my print is only printing where it shouldend
@boazandruth909Ай бұрын
Great design. I did have one issue with a bad spool to where the drive bit stripped out the drive winder. So I made the winder with two diff styles one with a manual handle the other with a 3/8 octagon post for the drill to grip onto. Printed at 100% for strength at that point.
@alborobleАй бұрын
Pretty cool .
@punkreeperfulАй бұрын
Mine was okay for a while and then the red error light, I minded not to bend it then it got stuck again, I cleaned it with contact cleaner now it works again, hopefully for good. Creality sent me a new one which has a rubber buffer around the metal pin, probably to protect it from bendind and keep dust out
@LayerLabAustraliaАй бұрын
Glad you got it sorted! I ended up getting a replacement as well, but shortly after I upgraded my machines and now it is just sitting in a box :P
@christianthorwestАй бұрын
Do you think it would be possible to print all the way down to -5 celcius?
@LayerLabAustraliaАй бұрын
Not sure... I think with PLA you MAY be fine, but ABS I would tend to think it would start struggling...
@frits183Ай бұрын
Noo Ender 7 support 😢
@LayerLabAustraliaАй бұрын
Yeah...it is a bit painful they don't have many printers on there...hopefully they will release more soon!
@enzolucio8661Ай бұрын
hola juanchi
@jimmartin5180Ай бұрын
When is it going to be able to add the sonic pad?
@bobheck4766Ай бұрын
Been looking for a couple days on how to adjust the amount of tree supports are produced on the prints, this was an awesome find just scrolling through shorts lol this is exactly what I needed to see now I won’t have tree branch supports over the entire print!!!!
@LayerLabAustraliaАй бұрын
Glad it was helpful!
@HoneKaiАй бұрын
Hey thanks for to tutorial! I have the same camera, so this ended up working beautifully!
@LayerLabAustraliaАй бұрын
woohoo! Happy printing :D
@daleythmpsnАй бұрын
It doesnt pickup the Raspberry pi wifi so Creality Print is useless to me
@fpgiulianoАй бұрын
It will work also on Creality app? I mean, after install, I could see via app?
@LayerLabAustraliaАй бұрын
Only creality cameras will work in creality print/creality cloud unforunately :( You will need to monitor all other cameras via mainsail.
@smash_must_dieАй бұрын
Its not great to give an advice without the notes. For example when you print with PETG and have a powerful fan, 100% of fan speed will make your part brittle cause will cause layer adhesion issues. Please note that 100% of fan actually works well for pla and only for pla.
@trykozmaksymАй бұрын
Nice.
@juanseloboАй бұрын
OMG! this is amazing! im thinking of doing the same, since i got an enclosed one but still i can smell the fumes, so im puting it outside but was thinking i can not be the only one! your 6 months of experience aare increidible helpful! thanks so much for sharing! how is it going now that is almost a year?
@LayerLabAustraliaАй бұрын
Haha glad the video has helped! I now have two printers permanently outside and they work perfectly, even in cold weather around 5-6 degrees C ( as long as you have an enclosure) 😜 just be cautious if you printing ABS cause that can be a bit more painful in low temp. As long as you keep them in an enclosure and clean them every 2-4 weeks from dust and stuff, youll be good 👍
@andreasnilsson5020Ай бұрын
That’s awesome to hear I bought the bambu p1s if you can store yours outside I’ll do the same
@juanseloboАй бұрын
@@andreasnilsson5020 LOL! that is the same printer that i got! it has being outside for 3 - 4 days and its working perfectly! i have being checking the humidity and if it gets too hot or cold but everything seems normal! i got the creality enclosure that says ender on the top part, it is very big so worked well with the p1s, i just had to print some legs to lift it up a little bit since the zipper got in the way to open the door of the printer , so just wanted to share my experience i hope it helps !
@LayerLabAustraliaАй бұрын
Glad to hear everything is working well! Happy printing 🥳
@frits183Ай бұрын
How to insert a Ender 7 model. They just forget this model everywhere 😢
@LayerLabAustraliaАй бұрын
Yeah..I wish they supported all ended machines... Have you tried orca?
@maffysdadАй бұрын
Thank you!... Thank you for showing Creality Print 5.0 in a previous video and 5.1 in this video, and also for having the Ender 3 V3 KE. I've been using some form of Creality Slicer based software since I got my Ender 3 Pro, and whilst more recently since purchasing my V3 KE I've tried Orca, Fusion and one or two others, I just can't seem to get on with them, even though others swear by them and there seems to be a bigger community out there for them. I know there's better machines out there than the Ender 3 V3 KE, but I was limited by budget, machine portability and space constraints, and quite honestly I'm really pleased with the purchase, it's a very impressive machine, although it is difficult to print at the advertised 600mm/s, the best I can get for general reliable prints is 350mm/s, but that's way better than the 60mm/s of the Ender 3 Pro. So I'm looking at your video content, and wondering if you are considering doing a guide for the dreaded ABS filament. I have no issues with PLA or PLA+, Well, not for my level of results, but I really struggle with ABS, like, to the point I've given up, even after buying a enclosure. Please, can you do a video on ABS using Creality Print 5.1, Ender 3 V3 KE, profile and best settings and set up, or direct me to videos you use that you've found really helpful in making your set up work. Many thanks.
@LayerLabAustraliaАй бұрын
Hey hey 😁 glad you have found the videos helpful! I've also dabbled a bit in orca but I feel like the simple layout of creality print is just easier to use and understand. Don't worry, abs is a bitch 😆 it is so sensitive to everything... It is basically unusable unless you use magigoo on the plate to keep everything stuck down. But if you use too much then the plastic melds with the plate rendering it unusable. I print with petg now, yes, less temp resistance and not as strong, but still pretty good for most situations that aren't too hot. But it's a good video idea, would be happy to share what I've learned so far for those still persisting with abs.
@halohalohype3495Ай бұрын
@@LayerLabAustralia the only thing i hate about abs till now with my enclosed ender 3 ke is fucking bridges, even with supports the bottom part just collapse...
@LayerLabAustraliaАй бұрын
@@halohalohype3495 yeah...the fan will help that to some extent. I used to print with 0 fan, but found that using about 20-30% can actually be okay, just make sure to disable it for the first 3 layers so you don't get warping.
@noobt4egunsАй бұрын
How much better results its to use Klipper? I have Ender-3 direct drive full upgraded and printing like professional printer. Especially the TPU 95A elegoo
@noobt4egunsАй бұрын
You confusing me😅 If use the settings from cura then what will happen?
@noobt4egunsАй бұрын
Nice but look difficult and scary. I will update my firmware first but if i must the newer firmware then will be a problem?
@LayerLabAustraliaАй бұрын
haha yeah the command terminal is a bit different from what people are normally used to.. new firmware is always good, they iron out kinks and make the machine faster (most of the time) and you'll need the latest firmware for everything to work properly. Which ender 3 do you have? or is it the base model?
@noobt4egunsАй бұрын
@@LayerLabAustralia i have Ender-3 the first model direct extruder full upgraded And you can see my work in my KZbin channel. Tomorrow i will receive the ender 3 v3 ke
@LayerLabAustraliaАй бұрын
@@noobt4eguns Ahh yes the ender 3, that was my first printer until it stopped working and i threw it in the bin :P Love your content dude! looks good! I have another channel about gel blasters and I actually 3d printed a carbine mod for my glock, check this out kzbin.info/www/bejne/foW5moWjq9KUrpY P.s you will love the KE, NO MORE BED LEVELLING woohoo
@joaquinfaz5553Ай бұрын
What’s new is that it crashes on every big model with tree supports
@LayerLabAustraliaАй бұрын
I have heard that you may need to completely wipe Creality Print off your machine and start from scratch if you are having major issues. Annoying...yes...but better than not having it working :P Alternatively, if you have tried everything, take a look at Orca Slicer.
@maffysdadАй бұрын
I find v5 and v5.1 crash quite a lot with lots of models on a build plate, and my pet peeve is when you try to close the program down it just won't close, you have to go into Task Manager and End Process it to get it to close, and for this there is no error report to send in. It's just annoying that when you reopen it the program wants to 'recover' the previous model.project, which even when it does so, all the parts aren't in the orientation so you have to redo all that, and likely as not it'll crash before you get to print. But the interface is nice and simple, and it works so well with the Ender 3 V3 KE that I put up with it in the hope they'll fix those problems.
@culphy8647Ай бұрын
Anytime I look at the estimated time it is way way off any advise?
@LayerLabAustraliaАй бұрын
I get this sometimes.. you'll just need to re-add your filament preset as the settings have become corrupted or you've accidentally changed something along the way. For the time being, record your filament settings in a word document so you can refer to them when this happens.
@Bourney382Ай бұрын
You my friend are a frigging legend, I'm new to this wasn't sure how to fix amd this saved me alot of panicking 😅
@LayerLabAustraliaАй бұрын
haha glad the video helped! :D
@lucasferreira22109Ай бұрын
What web interface are you using to acess those options?
@lucasferreira22109Ай бұрын
Ok mainsail.. I cant acess mainsail but the camera works just fine
@LayerLabAustraliaАй бұрын
You can install mainsail using the helper script I use in the video :)
@AkylexАй бұрын
Thanks a lot for this tutorial :3
@LayerLabAustraliaАй бұрын
No worries 🤠
@张素丽-p6jАй бұрын
I found a treasure app, and this video is very good.
@slothified806Ай бұрын
i got to the search ip address part and the other we apparently added didnt come up
@leonardomaragliano1232Ай бұрын
hi, it worked well. btw there is a method to change resolution after the installation? i've choosen 720p but i want to try 1080p
@LayerLabAustraliaАй бұрын
It looks like you will need to install crowsnest in order to make changes after the initial install. here is the link - crowsnest.mainsail.xyz/setup/installation . I haven't tried this myself, so let me know how you go :)
@ethandunlap67552 ай бұрын
so quick thing for anyone who is having troubles connecting the nebula camera. My camera stopped connecting to my phone on Creality cloud, but still worked on my pc being able to see the feed from there. I just rebinded the cloud on my phone and its working again. just go to bind on the printer and log out if you need to, then account on phone and top right left most icon and scan the qr code on printer and bam working again.
@Ramonsainz19772 ай бұрын
idioma español ?
@ImbecileDk2502 ай бұрын
Legend for making this video!
@LayerLabAustralia2 ай бұрын
glad it helped! :D
@tronstr2 ай бұрын
What are you using for software? My screens look nothing like yours and when you say your going to use a new mainsail IP, where does did you get that? You seems to skip over those kind of things
@LayerLabAustralia2 ай бұрын
sorry if I didn't make that part clear. You need to add on ":4409" to the end of your IP to access the mainsail interface. Otherwise you can override this entirely by using the helper script. When you plug in your IP, it will take you directly to mainsail instead of needing to add the 4409 at the end :)