Thanks, I love ingenuity. Question does that spring keep it on all the time and then you pull the cable to shut it off.? I think I’m gonna go ahead and purchase a kit. I seen him on eBay starting at around $30 maybe going all the way up to over $80 on eBay just wondering what the quality of these kits are. I love the idea of getting rid of the solenoid, not having to have the relay and given me more room under there.
@bargainbear1483Ай бұрын
@@TheRitchieLeeShow yeah the setup was spring loaded so when I pulled the cable, after the engine cut out it would just release back into a fuel-on position. I put a relatively strong spring on there just to make sure I wouldn't have any problems with it sticking.
@ronaldrrootiii60406 ай бұрын
What was the piston problem after all?
@bargainbear14836 ай бұрын
The dude i bought the truck from lied to me, knew the block was trashed, and I ended up selling it for $700 just to get rid of the pile of shit
@user-pk2fg8im4u Жыл бұрын
Those welders were used in the shipyards during WWll. I've got one that my dad got in 1951 when we first got electricity in rural Montana. They weigh a ton, and have a duty cycle that won't quit. I've always been told the missing link, (some Mid States don't have it), was an arc stabilizer. Just what I've heard, not saying it's gospel. It's my go to welder.
@AWDJRforYouTube Жыл бұрын
I have the same welder and made a video in recent years on it...kzbin.info/www/bejne/omXNlmyipNyEoJY
@tomjones7853 Жыл бұрын
Go to Napa and get a choke cable witha knob. You need stiff wire not that cable shit. Thats is trash
@ricardoortiz27062 жыл бұрын
Was the actual plumbing twisting on you when you were loosening it?
@bargainbear14832 жыл бұрын
I don't think so. It's hard for me to remember back that far. The nut came loose just fine after I was able to stop the inner fitting from turning.
@coreydeanbackmanhaeft95792 жыл бұрын
It was extremely helpful. Thank you.
@charlesjlintner89582 жыл бұрын
I just bought a welder similar to the one that was showed are they good welders
@bargainbear14832 жыл бұрын
Yeah i loved that old welder, unfortunately I didn't have room for it or an electrical connection at the house i rent so i sold it a few years back. Wish i hadn't.
@midwestoenr49052 жыл бұрын
I see so many vids of people messing around with fuel shutoff solenoid idk why everyone wouldn’t just do this thx for your vid I’m swapping my Cummins in my Chevy and I’ll definitely be doing this
@bargainbear14832 жыл бұрын
You could even run it through your dashboard if you wanted to haha. I just put it in the easiest place possible.
@bargainbear14832 жыл бұрын
The way that solenoid is designed is pretty dumb to begin with anyway. And with it being a manual pump it kind of made more sense to me to just bypass the electronics.
@ObamaoZedong2 жыл бұрын
Or just dump the clutch with the brakes on.
@bargainbear14832 жыл бұрын
Mine was an automatic....
@midwestoenr49052 жыл бұрын
That wears your syncros
@ObamaoZedong2 жыл бұрын
@@midwestoenr4905 Forgive me for my ignorance, but how would that wear the synchros if you're already in gear? Wouldn't the shift forks not be pressing on them? Every mechanic I've spoken to says that stalling, which is essentially what I'm talking about, doesn't hurt the vehicle one bit, but anyone can be wrong, even pros.
@farhadmalekasghar9452 жыл бұрын
Thank you
@hazzurs3 жыл бұрын
I have a 12 valve Cummins and it won’t crank, it has new batteries and a new starter but still won’t crank
@bargainbear14833 жыл бұрын
Make sure you have power at the starter. I'd probe the power feed wire with a test probe while someone inside is turning the key. If you do, your new starter might be bad. If you dont, you either have a break somewhere in your power supply cable (I've had that happen on a cummins) or you probably have a bad ignition switch.
@hazzurs3 жыл бұрын
@@bargainbear1483 how do I test if I have a bad ignition switch, I got my starter from extreme diesel and I hear it working
@bargainbear14833 жыл бұрын
@@hazzurs so is the starter actually spinning? Because if it's spinning but not doing anything, you're missing teeth on your flexplate.
@bargainbear14833 жыл бұрын
@@hazzurs I guess I should ask, do you just hear the starter solenoid click or can you actually hear the starter spinning?
@hazzurs3 жыл бұрын
@@bargainbear1483 when I turn the key to turn it on I hear a click or some noise every time I try turning it on
@sal15203 жыл бұрын
I’m looking to replace the injections on my 03 Disco without the pipes. Is it easy to remove? And do you suggest throwing new gaskets on the new injections ?
@holidaydrumman3 жыл бұрын
I’m use to a 4bt so I couldn’t find it on a my friends 6bt he let me drive and the battery died! I was under the truck looking for it! Haha! Thanks
@pepper774494 жыл бұрын
Starlink
@mattcoats4 жыл бұрын
It helped me, thanks!
@mikechan2314 жыл бұрын
Wow dude, you don’t understand! You just saved my life!!! Finally got the fucker off! Mine was on tight, had to really pull hard on the wrench but it worked perfectly. Thank you.
@17quarters484 жыл бұрын
I have an 02 Disco II how would I go about plugging the wholes in head after the pipe removal, I live in a no emissions county in Oregon don't need it
@bargainbear14834 жыл бұрын
It might be a stretch, but you might be able to find big enough bolts with the same thread that you could just thread into those holes after taking the smog pipes off. Other than that I'm not too sure what would work the best.
@73superglide624 жыл бұрын
So its running away and how do get down there
@bargainbear14834 жыл бұрын
Sorry i don't quite understand the question..
@73superglide624 жыл бұрын
@@bargainbear1483 what's so hard ,,you have it on The floor it very simple
@carlosquintanilla38595 жыл бұрын
I recently bought a 96 Dodge dually with a 5.9 ltr engine. Had the same problem. Went to a salvage yard and bought a used fuel shut off solenoid for 55$. Installed it and had the same issue. It has to be the inline fuse wire.
@xtatic32945 жыл бұрын
It was helpful but really cloudy vid
@bargainbear14835 жыл бұрын
Yeah, took it outside at night with a camera phone 💁
@alanbrownie22405 жыл бұрын
That was a huge help sir and thanks a million for posting the video. I have held back from removing the secondary air from fear of breaking it off. You da man thanks.
@Erklzanderz5 жыл бұрын
Another option is to rig it up the same way you do here but use a choke cable. I used the Edelbrock brand cable and it has a clean look to it and is just mounted on the lower left of my dash by my off road light switches. It looks clean and I can take the keys out and let my truck warm up or stay running in the winter without worrying about someone stealing it or a kid putting it in gear.
@MrLrry12665 жыл бұрын
300 AMP can be carbon torch, scarfing, and resurfacing hard faces on plow and scraper blades, grader blades and such. It was during a time of growth after WWII US manufacturing was slowly winding down from the war effort. Also, the US was still supported very heavily by small farm America and stuff had to get done. The US as well as the World has populated to unreal numbers as well as technology. You can now buy a welder that will do all this thing did and it will be the size of a large car battery as well as an inverter.
@nonagreeable5 жыл бұрын
Still have the truck?
@nonagreeable5 жыл бұрын
Regular cab dually🤘🙌
@bargainbear14835 жыл бұрын
Yeah i sold it... I miss it though haha
@valveF-dm3lc5 жыл бұрын
@@bargainbear1483 I found a regular cab dually recently...now sits my 69 bump side cab on it. should be on the road in a few weeks. Thanks to your vid I now know how Im going to incorporate a kill cable to my factory Ford gasser choke pull handle. Thanks dude
@ElonMuskX5 жыл бұрын
$250_00!!!! Are you sure that wasn't built by Mahindra?
@billmcyrus6 жыл бұрын
Please post a video of this in use!
@madbear35126 жыл бұрын
Who the hell would use this welder to weld a trailer.
@madbear35126 жыл бұрын
And what you pay for it
@billmcyrus6 жыл бұрын
People used machines like this for decades and it worked quite well.
@sandsthirtytwo78526 жыл бұрын
oh yeah!!! ha ha!
@sandsthirtytwo78526 жыл бұрын
love the sony xplod beeping
@bargainbear14836 жыл бұрын
😂 close. It's actually a pioneer.
@bargainbear14836 жыл бұрын
*Update* so at the time of this video, I was unaware that this shutoff was available on amazon for $30. They are expensive as a dealer item, but cheap on amazon. I would either do this as a temporary fix or shut it off by hand by opening the hood and manually doing it until the new one came. Unless you just like feeling like you're driving an old manual shutoff tractor, in which case, this is the way to go 😊
@williambaker73515 жыл бұрын
Do you have a link for the one available on Amazon?
@Chris-.F6 жыл бұрын
Cool man. Doin this today. Thanks for the vid.
@davejones25416 жыл бұрын
Hey Justin, I also live in Peoria NW of you. Did you ever get your rover up and running?
@bargainbear14836 жыл бұрын
Dave Jones haha no, I sure didn't. Turned out, the guy I bought it from lied to me about the engine. He had replaced the head gaskets, and in the process, over-torqued one of the bolts and ruined the block. Ended up selling it as is for $600 because I was moving back to Indiana. Needless to say, I will never own another one.
@davejones25416 жыл бұрын
Ah man bummer! Yeah they’re a handful to maintain and I also have an 03 Disco and am having some SAI pump problems. Like ur trick for loosening that air injector line. I have a P1415 code only so something’s amiss on the pump side of the engine. Love these trucks as there’s nothing really like them out there, but darn the British for their reliability! LOL
@sikorik99646 жыл бұрын
Hey, if it works why not.
@stelthcamo3576 жыл бұрын
We're the hell can I get the lead connectors for these welders I can't find them anymore
@bargainbear14836 жыл бұрын
Chirs Burkett good luck man... You'd probably have to cast your own out of copper or something and figure out a way to attach it to your cable?
@zombieresponder6 жыл бұрын
Lenco still makes machine plugs(NOT Miller plugs). I just bought some for less than $8 each from weldingsupply. That being said, those may be even larger than machine plugs. If they are, take an old one to a local machine shop and have them duplicate it from a suitable brass alloy.
@jorgepizarro33276 жыл бұрын
What is the difference between a secondary air injection head and a non secondary air injection head..? I swapped over a 2001 4.0 non secondary air injection into my 2003 which is a secondary air injection and the only thing that I swapped over from the 2003 block to 2001 was the intake manifold and then I blocked off all the lines for the secondary air injection and now I'm getting a popping noise in the intake manifold. do you know what could be causing this... And thanks in advance
@bargainbear14836 жыл бұрын
jorge pizarro so it's been a few months and that rover ended up having a trashed block 😒 honestly that sounds like a head gasket to me. I realize you said you just put those heads on but trust me when i say those engine blocks were total garbage. What torquing sequence did you use? And did you use a digital torque wrench?
@jorgepizarro33276 жыл бұрын
Justin K yes I did
@leeisenberg7 жыл бұрын
Similar to my old Forney, but why does it have the separate box on top?? My Forney is just 1 big box. Thanks, take care from Tn.
@bargainbear14837 жыл бұрын
lee isenberg the seperate box is for DC welding, it helped the rookie shipyard welders pick up on the skill of arcing more quickly.
@stovepipe9er4 жыл бұрын
If it says “the missing link” it’s a high frequency box for tig welding aluminum
@jodyely74047 жыл бұрын
I thought mine was old.Love the M layout.Way to Cool.
@kartsandcameras24417 жыл бұрын
They sure don't make them like they used to
@jodyely74047 жыл бұрын
Have a old 230 amp portable Sears and Roebuck Company Welder Model #11320780.Was wondering what it's worth.Sears no longer sales replacement parts for this model.
@jeremywortinger46497 жыл бұрын
there so much room for activities under the hood! love it!
@SnakePliscan8 жыл бұрын
Good ta know if i get in a jam and i need ta make it run. thanks!
@gunz_n_bikes1714 жыл бұрын
SnakePliscan2 itll shut it off not make it run
@RinoaL9 жыл бұрын
0:25 i think your talking about my video, haha and yeah mine only goes to 150A. you may need 300A for an arc torch or something not used anymore.
@bargainbear14839 жыл бұрын
yeah I can't remember if I mentioned in the video that it came with an arc torch... it did though. haven't used it. I don't have any carbon rods large enough for it.
@zombieresponder6 жыл бұрын
300 amps would be for very large rod, 1/4" diameter or larger. Alternatively, it could be used for carbon arc gouging if one had a gouging torch and a large enough air compressor.
@stovepipe9er4 жыл бұрын
Welders usually don’t work all that well at their highest settings, and the duty cycle is low. You don’t buy a welder that’s maxed out at 100 amps if you plan to weld at 100 amps.