Just a quick video showing how I modified my 1996 12 valve to be shut off without having to pop the hood to kill it. Shutoff was broken for months so I finally came up with a cheap solution. Works!
Пікірлер: 44
@midwestoenr49052 жыл бұрын
I see so many vids of people messing around with fuel shutoff solenoid idk why everyone wouldn’t just do this thx for your vid I’m swapping my Cummins in my Chevy and I’ll definitely be doing this
@bargainbear14832 жыл бұрын
You could even run it through your dashboard if you wanted to haha. I just put it in the easiest place possible.
@bargainbear14832 жыл бұрын
The way that solenoid is designed is pretty dumb to begin with anyway. And with it being a manual pump it kind of made more sense to me to just bypass the electronics.
@Erklzanderz5 жыл бұрын
Another option is to rig it up the same way you do here but use a choke cable. I used the Edelbrock brand cable and it has a clean look to it and is just mounted on the lower left of my dash by my off road light switches. It looks clean and I can take the keys out and let my truck warm up or stay running in the winter without worrying about someone stealing it or a kid putting it in gear.
@Chris-.F5 жыл бұрын
Cool man. Doin this today. Thanks for the vid.
@bargainbear14835 жыл бұрын
*Update* so at the time of this video, I was unaware that this shutoff was available on amazon for $30. They are expensive as a dealer item, but cheap on amazon. I would either do this as a temporary fix or shut it off by hand by opening the hood and manually doing it until the new one came. Unless you just like feeling like you're driving an old manual shutoff tractor, in which case, this is the way to go 😊
@williambaker73515 жыл бұрын
Do you have a link for the one available on Amazon?
@holidaydrumman3 жыл бұрын
I’m use to a 4bt so I couldn’t find it on a my friends 6bt he let me drive and the battery died! I was under the truck looking for it! Haha! Thanks
@sandsthirtytwo78525 жыл бұрын
love the sony xplod beeping
@bargainbear14835 жыл бұрын
😂 close. It's actually a pioneer.
@carlosquintanilla38594 жыл бұрын
I recently bought a 96 Dodge dually with a 5.9 ltr engine. Had the same problem. Went to a salvage yard and bought a used fuel shut off solenoid for 55$. Installed it and had the same issue. It has to be the inline fuse wire.
@SnakePliscan7 жыл бұрын
Good ta know if i get in a jam and i need ta make it run. thanks!
@gunz_n_bikes1714 жыл бұрын
SnakePliscan2 itll shut it off not make it run
@nonagreeable5 жыл бұрын
Still have the truck?
@nonagreeable5 жыл бұрын
Regular cab dually🤘🙌
@bargainbear14835 жыл бұрын
Yeah i sold it... I miss it though haha
@valveF-dm3lc5 жыл бұрын
@@bargainbear1483 I found a regular cab dually recently...now sits my 69 bump side cab on it. should be on the road in a few weeks. Thanks to your vid I now know how Im going to incorporate a kill cable to my factory Ford gasser choke pull handle. Thanks dude
@sikorik99646 жыл бұрын
Hey, if it works why not.
@sandsthirtytwo78525 жыл бұрын
oh yeah!!! ha ha!
@73superglide624 жыл бұрын
So its running away and how do get down there
@bargainbear14834 жыл бұрын
Sorry i don't quite understand the question..
@73superglide624 жыл бұрын
@@bargainbear1483 what's so hard ,,you have it on The floor it very simple
@tomjones7853 Жыл бұрын
Go to Napa and get a choke cable witha knob. You need stiff wire not that cable shit. Thats is trash
@ElonMuskX5 жыл бұрын
$250_00!!!! Are you sure that wasn't built by Mahindra?
@ObamaoZedong2 жыл бұрын
Or just dump the clutch with the brakes on.
@bargainbear14832 жыл бұрын
Mine was an automatic....
@midwestoenr49052 жыл бұрын
That wears your syncros
@ObamaoZedong2 жыл бұрын
@@midwestoenr4905 Forgive me for my ignorance, but how would that wear the synchros if you're already in gear? Wouldn't the shift forks not be pressing on them? Every mechanic I've spoken to says that stalling, which is essentially what I'm talking about, doesn't hurt the vehicle one bit, but anyone can be wrong, even pros.
@hazzurs2 жыл бұрын
I have a 12 valve Cummins and it won’t crank, it has new batteries and a new starter but still won’t crank
@bargainbear14832 жыл бұрын
Make sure you have power at the starter. I'd probe the power feed wire with a test probe while someone inside is turning the key. If you do, your new starter might be bad. If you dont, you either have a break somewhere in your power supply cable (I've had that happen on a cummins) or you probably have a bad ignition switch.
@hazzurs2 жыл бұрын
@@bargainbear1483 how do I test if I have a bad ignition switch, I got my starter from extreme diesel and I hear it working
@bargainbear14832 жыл бұрын
@@hazzurs so is the starter actually spinning? Because if it's spinning but not doing anything, you're missing teeth on your flexplate.
@bargainbear14832 жыл бұрын
@@hazzurs I guess I should ask, do you just hear the starter solenoid click or can you actually hear the starter spinning?
@hazzurs2 жыл бұрын
@@bargainbear1483 when I turn the key to turn it on I hear a click or some noise every time I try turning it on