Surprized that esc that came in that brushless combo is holding up to 3s mine when up in smoke after 1st tigger pull on 3s. Motors r good but im now using HW 10bl60 esc no problems. Great video by the way.
@dutch1800Күн бұрын
I installed that kit on my Mojave and it fit just fine?
@riceboypinoyКүн бұрын
What pinion are you running?
@chadmanfredo91743 күн бұрын
What receiver are you using? ( gyro?)
@TheDudeRc2 күн бұрын
The 315, no gyro
@ridered60883 күн бұрын
5400kv motor? How bad does that thing cog? Does it cog at all in the dirt? The street seems to be more forgiving to cars that cog.
@TheDudeRc3 күн бұрын
Haven't noticed any cogging. With the Firma 2-1 it cogged pretty bad but this one seems fine.
@ridered60883 күн бұрын
@TheDudeRc Thanks for the reply. I want to install a brushless setup and was thinking 3800kv to keep it from cogging. Good to know the 5400kv does not cog.
@killertek783 күн бұрын
Stock diff hardware fits in the Ali diff from what I'm told, worth a try.
@Alotsaplon3 күн бұрын
Same thing happened on my Mojave where the plastic cup gave out on my stock cvds, so gotta get myself some metal cups and granite cvds front and rear cause I just put metal granite arms on my Mojave which are considerably longer. I got the same off brand aftermarket differentials and didn't like the Phillips screws those use so I put the metal output cups and spider gears into the stock differentials because i also stripped the stock plastic spider gears in both diffs and so I could use the stock hex screws and put some medium thread lock on them, haven't had a diff cup come loose yet. My wheels are completely bald now :(
@RCRICHIE3 күн бұрын
I purchase same part no. Axles and they fit, may be a wrong packaging issue
@timmytfpv73163 күн бұрын
Can you use stock radio with brushless
@TheDudeRc3 күн бұрын
No, you have to change out the radio system. The stock ESC is also your Rx.
@V0rt3 күн бұрын
I think there might be some QC issues with Arrma/Horizon right now. The metal axel upgrades I ordered fit fine, but the adjustable steering links they sent are way too long.
@TheDudeRc3 күн бұрын
I have heard that last week but this is the first time I have experienced it. :(
@mcarignan3 күн бұрын
@@TheDudeRc Happened to me a month ago, I picked up the metal axle set for the Granite Grom (for the same reason as you) and one of the 4 cups was noticeably shorter than the other 3... my LHS guy guessed it was probably a Mojave part that had slipped into the Granite bag... the guy was flabbergasted! Beware Arrma QC ...
@TrucknWithStan3 күн бұрын
What amp/volt do you charge those batteries?
@TheDudeRc3 күн бұрын
2.2 amps
@TR2NLG3 күн бұрын
Are the China diffs really that bad? I want to run these on my stock Mojave because of the lack of metal ones from backorder-Arrma here in Europe. No Brushless upgrade planned (for now). Thank you for the video!
@TheDudeRc3 күн бұрын
Yes they are. They dont seal well, are noisy, throw screws all the time and are of just poor quality. I figured for $9 i would try them out but they are not any good. Hope i was able to save you some money!
@peterGriffin-ug7jv3 күн бұрын
Its not just tx drivers
@darkwriter774 күн бұрын
Bah ... 'tis nothing. You should try Phoenix drivers. Whole new level of stupid right here, yo.
@ryand47864 күн бұрын
I know you’re just venting, sometimes we have to. I’ve seen bad driver footage from countries all over the world , and they all look exactly like that. Never underestimate the power of stupidity !!!
@jakekennedy82924 күн бұрын
Just won one of these in a raffle off of the Snap-On truck today. It’s time to have some funnnn!!!
@ThomasDouglas-fw8dz4 күн бұрын
Watched❤
@genevievejoybautista-lindsey4 күн бұрын
Love Baloo!!!
@MrGonzoify5 күн бұрын
I love my lasernut. I got it at an amazing price, and have not had any real issues. Its one of my favorite rc's.
@19_96tyler6 күн бұрын
That’s why I quit getting those and the McMuffin sandwiches. I might jinx myself but I’ve been getting the bacon, egg and cheese sandwiches for a while and never really had a problem. Although they don’t put the cheese on it sometimes 😂
@artministratorle6 күн бұрын
Noice noice! I had the Mojave EXB with Max6 Combo (6s) and it was a joy, but not had time for anymore. Directly ordered the mini version once they´ve anounced it. Must say even in brushed it´s kinda good, much better than i´d expected. but yeah also looking fwd to maybe build a small 2S or 3S brushless combo in it, majorly because of the gyro function from the new receiver then, as well as get a little more topspeed & punch out of it. But not sure if all the stock components will draw much quicker then (basically won´t build arround that much on that thing, it should just drive "always"
@leaningtoofarwillmakeyoufa72446 күн бұрын
Did you plug the fan directly to the receiver?
@Suuhdud37 күн бұрын
Take that razor on 4s and hit the biggest jump as fast as you can. Let’s see how far it will launch!
@chriscarroll36357 күн бұрын
I have two stereo integrity SQL 12's in a sealed enclosure on an audio legion al2500.1 and the absolutely pound. Love them....
@Frankredline11 күн бұрын
Very nice. Yes a set of tires will help out . Try the predator compound by proline .
@bighossgaminghd847311 күн бұрын
DSM off road copied those quick release battery cups and got called out for it and that’s probably why they made the latches replaceable 😂
@TheDudeRc11 күн бұрын
Oh really? Thats nuts! Had no idea! Who did they copy? Was the first set I had seen and I am on a couple H10 pages and have been since they announced the release of the thing. Thats how I found everything on it. LOL
@bighossgaminghd847311 күн бұрын
@@TheDudeRc Don Howard was the first person to come out with this design he sells them on Etsy and he sells the 3D files on cults
@19_96tyler11 күн бұрын
I love seeing any content!
@PsychoElectricRC12 күн бұрын
Outcast is epic on 8s, so is gorgon! 😂 Epic man, looks good, I have the 3s INFRACTION chassis on 6s ARRMA blx185 and savox servo, that thing rips, I want the 1/7th so bad
@TyJoe_N_MattyMoe12 күн бұрын
Nice collection dude. I only have 6 rigs; 4 are running, 1 needs rear cantilever suspension replacement, 1 needs electronics to be completed. I use my TF2 Marlin and Yeti Jr the most. The Bog Hog would be a fun mud basher here in southwestern Wisconsin. I'd love to see you burn up some tires on a skid pad. Smoke is always cool.
@TheDudeRc12 күн бұрын
Right on
@user-fk8zx8li7b12 күн бұрын
I decided to paint mine because i dont like lioking like everyone else cherry red and gold cage. Its turned into an ironman looking build. Some 2.2 husk some adjustable brass rims amazon high power servo an a 3200kv sensored brushless motor /esc amazon special dropped the pinon 2 sizes and this thing crawls so good now and plenty of punch!! Not such a belly machine anymore.
@RC-Closer131312 күн бұрын
Anything but crawling… lol
@TheDudeRc12 күн бұрын
LOL
@ryand478612 күн бұрын
Good update , I also have stuff I don’t use as much anymore. This hobby, sometimes you get caught up in the hype of new cars/trucks and after getting some of them, the novelty wears off. I’m trying to hold back , because the more rigs I get , the less I use the ones I already have!!!
@TheDudeRc12 күн бұрын
Very true!
@peterGriffin-ug7jv12 күн бұрын
Hmmmm
@AllInRc197112 күн бұрын
The Dude abides. Mine started with a Losi Mini LST. Its around 260 rigs.
@AllInRc197113 күн бұрын
As soon as it cools down "I'll get mine back out. IMHO, The Fusion Pro is the best in a 1/10 crawler for the price,
@scotttrent109213 күн бұрын
But can it pass cars on i35...
@TheDudeRc13 күн бұрын
The way they drive in this town? Probably. LOL
@retrothruster253913 күн бұрын
Sorry but does anyone know how to reverse the "SWB" switch, seems like it would be more intuitive?
@KTMKID45014 күн бұрын
If you want a bit more speed, Put a 52t spur gear in it. No loss of awsome crawl. Fusions are the LS's of rc motors... I have six of them, Why would anybody waste there money on anything else.
@Donsalaskanrcadventure16 күн бұрын
Great Video.. I learned a lot
@user-sm3lj8lm9g16 күн бұрын
정말 멋지네요~~^^
@TheDudeRc16 күн бұрын
감사해요! 나도 그렇게 생각해
@Socalnik6617 күн бұрын
I didn't like losing the look of the missing number fins. So I just Dremeled the tub a little bit to fit in the number fins.
@Socalnik6617 күн бұрын
Love my H10, as for upgrades. Got the Fusion Pro, Reefs 555, Reefs servo winch, H-Tech bumpstops, same tub and fuel cell as yours but in red, rear shock tower rack from same seller, Vanquish Riots with all the fancy rings, pinless 3d print battery trays. My next upgrade is some BAMF 3d print inserts. And eventually a set of Proline Azteks. The H-tech alum panels look amazing. But Im into stickers, decals, and the sponsership liveries. So I'll just stick with the plastics. Love your content. Keep up the good work. This such a great hobby but its a drain on the wallet.
@TheDudeRc16 күн бұрын
Sweet! I plan on the same inserts, shock rack and their brass servo. Cheers!
@freyjaslittlejeeps160217 күн бұрын
I was hoping they'd taken my suggestion and used driveshaft screw/pin thingies to keep the bump stops together. Oh well, I stretched my links with 5525 rod ends, so now the axle is about 3/8" too far forward for the bump stops to hit the axle housing. Oops? :P Also, I'm cheap, so I just put the battery tray pins in from the top and ignore the body clips on them entirely. Works great so far. If it does get sloppy, I'll get ahold of Fine Laser Designs for his battery tray latches. I have his clipless mounts on my 10.3 JLU, and had them on a Lasernut, and they're awesome. Another also, in the unlikely event that I order a set of those panels, I'm going to wrap them in the thickest vinyl I can manage to wrap the things, because I hate scratches on bodies.
@Rlaarlo18 күн бұрын
Hard work installing the wheels, but it was worth it! The gold one matches the green body perfectly. The winch looks great and works well-very cool! 🥰
@BenF-wr1sx18 күн бұрын
How do you install the hot racing servo plate before I physically destroy my car I got over$600 in it I’m having a melt down time to walk away I really hope I don’t destroy it. I’m about to I gota take a walk
@orlandocastaneda974918 күн бұрын
I broke my rear differential on my Mojave and I’m planning on doing an exact rebuild like yours and make it brushless 🔥 these videos have been helpful
@DSMOffRoad18 күн бұрын
Your build is looking sweet, I need to order some new stuff for mine now. Thanks for giving my battery cups a try. They are printed in ABS so they are already really durable, but I wanted to include 2 extra latches as a just in case anyways.
@TheDudeRc18 күн бұрын
I absolutely LOVE your battery trays! Those pins always bugged me and they make battery replacement so much nicer! Great job!
@retrothruster253918 күн бұрын
That's pretty darn awesome, I gotta get one of the winches! I installed the same wheels last night (identical truck and wheels), looks pretty jazzy. First time using beadlockers so it took a few to figure it out. Also installed the diff covers, not a worthy upgrade imo if you have the skid plates, the weight is good but it's a fiddly install imo. Great work as usual!
@TheDudeRc18 күн бұрын
Thank you! I have been debating on the diff covers and aluminum axles for a week now. I may end up getting them but this rig is SO heavy already that its almost 1/7 scale in size AND weight now lol
@mickd818819 күн бұрын
Nice upgrades.. The Fusions are such a great option.. I run the 1800kv SE and they are buttery smooth. Just have to program with the card instead of Bluetooth. Awesome value especially for you guys in the US.. Hard to go back once you start using these, space saving, value for $ motor/esc combos. New panels look great... um well, they did.😢 Cheers👍🇦🇺
@TheDudeRc18 күн бұрын
I am thoroughly impressed with the Fusion Pro motor. A-Main had a really good deal last week and the motor and card together were under $150 shipped so i had to try it. Glad i did! Now i have to worry about blowing gears! LOL
@michaelwilliams708219 күн бұрын
Very cool! Wheels look great and that wench is awesome!